2740 replies to this topic

[maxi]

I should add "meta-azbox" but I'm not sure if it's going to be ok with new gstreamer and audio/video formats so you will be the tester yourself

 

Ok,

I will do it.

Thanks...

[Beeker]

Thanks, fbc_id does not exist.

 

I know enough for now.

[thmls]

 

I should add "meta-azbox" but I'm not sure if it's going to be ok with new gstreamer and audio/video formats so you will be the tester yourself

what about amlogic s912 kiii pro any news

 

And KI PRO please

[engineerkhan15]

 

 

I should add "meta-azbox" but I'm not sure if it's going to be ok with new gstreamer and audio/video formats so you will be the tester yourself

what about amlogic s912 kiii pro any news

 

And KI PRO please

 

Yes, please do remember these (KI Pro, KII Pro and KIII Pro) boxes while working on amlogic devices.

[starz]

And K1 plus please:)

[Persian Prince]

Fixed!
All is working now and build is done...
Thank you all for the help

How is the test build for normal e4hd?

Yes! Flashing and booting works fine... But when i will download plugins it's so clear and i cannot download any drivers... Like my wifi stick.. not so much feeds than official builds ???
All is working fine

Because you need to compile the feeds as well.

It's not a PLi build it's your build so have fun with your feeds

Edited by Persian Prince, 20 April 2018 - 18:55.

[jamal2367]

Fixed!
All is working now and build is done...
Thank you all for the help

How is the test build for normal e4hd?

Yes! Flashing and booting works fine... But when i will download plugins it's so clear and i cannot download any drivers... Like my wifi stick.. not so much feeds than official builds ???
All is working fine

Because you need to compile the feeds as well.
It's not a PLi build it's your build so have fun with your feeds

Thank you!
I have build it now with make feed..
it's done...

It's almost the same size is this normal ?

Edit: i have found 1 issue..
if I turn off the receiver then the blue LED remains on .. actually would have to be red .... hdmi signal goes away a few seconds later that's normal but the led is not red :/ it's always blue

Edited by jamal2367, 20 April 2018 - 19:15.

[Persian Prince]

Try

echo '1'>/proc/stb/power/turn_off

[jamal2367]

Try

echo '1'>/proc/stb/power/turn_off

Is there a way to fix it in the build..change files etc?

[Beeker]

For dm900/dm920 we did this.

 

https://github.com/P...e3d1614a3c6f879

 

If we talk about the same front LED?

You can change pattern in whatever you want. blue/red/blink/ in normal, standby .....

 

See changes lib/python/Screens/SessionGlobals.py

[jamal2367]

For dm900/dm920 we did this.
 
https://github.com/P...e3d1614a3c6f879
 
If we talk about the same front LED?
You can change pattern in whatever you want. blue/red/blink/ in normal, standby .....
 
See changes lib/python/Screens/SessionGlobals.py

I will try it and give a feedback!

[Persian Prince]

Try

echo '1'>/proc/stb/power/turn_off

Is there a way to fix it in the build..change files etc?

Yes but did it fix your problem?

[zeros]

Online update for dm900/dm920 with add LED color fix and skin_display fix should have on test feed available. Try and report.

Edited by zeros, 21 April 2018 - 05:38.

[Adga]

Online update for dm900/dm920 with add LED color fix and skin_display fix should have on test feed available. Try and report.

After the online update, the DM900 "crashed". The receiver does not work

 

 

Edited by Adga, 21 April 2018 - 07:04.

[Beeker]

Yes, It's a general problem, not the skin and LED patch.  Same probem here with dm8000

[MAIN] found 7 spinner!
[MAIN] executing main
[setIoPrio] best-effort level 3 ok
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 22, in <module>
    import Components.SetupDevices
  File "/usr/lib/enigma2/python/Components/SetupDevices.py", line 1, in <module>
  File "/usr/lib/enigma2/python/Components/config.py", line 4, in <module>
  File "/usr/lib/enigma2/python/Components/Harddisk.py", line 4, in <module>
  File "/usr/lib/enigma2/python/Components/SystemInfo.py", line 3, in <module>
ImportError: No module named HardwareInfo
[eDVBDB] ---- saving lame channel db
[eDVBDB] saved 358 channels and 5754 services!
[eDVBResourceManager] release cached channel (timer timeout)
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free

[Beeker]

I'm working on solution.

[Persian Prince]

It's because of the new changes in develop branch regarding model detection for flash image.

[Persian Prince]

For those who keep asking about other amlogic devices:

I can't fetch kernel sources and PLi's OE isn't recent enough to include latest bitbake features so you have to wait for next PLi update on develop branch.

Still I'm trying to find a way for this problem like changing all kernel recipes for amlogic which uses yocto recipes.

I'm just one person and can't handle all the heavy work.

[zeros]

I got the same confirmation, do not update now. If you did that, then update from front button for an old backup.

[engineerkhan15]

For those who keep asking about other amlogic devices:

I can't fetch kernel sources and PLi's OE isn't recent enough to include latest bitbake features so you have to wait for next PLi update on develop branch.

Still I'm trying to find a way for this problem like changing all kernel recipes for amlogic which uses yocto recipes.

I'm just one person and can't handle all the heavy work.

OK, no problem. You take your time, we will wait.

Thanks for all the progress made so far.