2740 replies to this topic

[frankviana]

root@alien5:~#dmesg | grep dvb

[    2.130091@0] cx231xx: Cx231xx dvb Extension initialized
[    4.173304@0] DVB: probe amlogic dvb driver
[    4.202847@0] DVB: registering new adapter (amlogic-dvb)
[    4.226935@0] aml dvb init
[    7.011612@0] amlogic-dvb dvb.52: DVB: registering adapter 0 frontend 0 ()...#######
[    7.019276@0] dvb_register_frontend line = 3450
[    7.023873@0] amlogic-dvb dvb.52: dev_info  dvb_register_frontend line = 3451
[    7.039900@0] amlogic-dvb dvb.52: DVB: registering adapter 0 frontend 1 ()...#######
[    7.047566@0] dvb_register_frontend line = 3450
[    7.052129@0] amlogic-dvb dvb.52: dev_info  dvb_register_frontend line = 3451
[    7.068193@0] amlogic-dvb dvb.52: DVB: registering adapter 0 frontend 2 ()...#######
[    7.075900@0] dvb_register_frontend line = 3450
[    7.080419@0] amlogic-dvb dvb.52: dev_info  dvb_register_frontend line = 3451
[   23.229449@0] dvbv5_set_delivery_system: Changing delivery system to 6
[   23.230371@0] dvbv5_set_delivery_system: Changing delivery system to 5
[   25.992129@0] dvbv5_set_delivery_system: Changing delivery system to 1
[   25.992205@0] dvb_frontend_ioctl: err (-95) fe->id = 1 cmd 68
[   25.992209@0] dvb_frontend_ioctl: err (-95) fe->id = 1 cmd 67
[   25.992288@0] dvb_frontend_ioctl: err (-95) fe->id = 1 cmd 68
[   25.992291@0] dvb_frontend_ioctl: err (-95) fe->id = 1 cmd 67
[   25.993055@0] dvbv5_set_delivery_system: Changing delivery system to 16
[   25.993091@0] dvbv5_set_delivery_system: Changing delivery system to 3
[   25.993166@0] dvb_frontend_ioctl: err (-95) fe->id = 2 cmd 68
[   27.326955@0] [<ffffffc001631ff0>] dvb_frontend_ioctl_legacy+0x658/0xe60
[   27.333593@0] [<ffffffc001632b00>] dvb_frontend_ioctl+0x308/0x1028
[   27.339717@0] [<ffffffc001627e80>] dvb_usercopy+0x58/0x1c0
[   27.345150@0] [<ffffffc001628028>] dvb_generic_ioctl+0x40/0x68
[   27.367244@0] dvb_frontend_ioctl: err (-95) fe->id = 2 cmd 68

root@alien5:~#

 

 dvb.jpg   51.73KB   3 downloads

 

 dvb2.jpg   88.62KB   3 downloads

Edited by frankviana, 14 May 2018 - 17:07.

[frankviana]

Install again and ftp connected


I use remote.conf from vidmod kii pro and key 'menu' not work
 

 

 

 

user: root
pass: pure2

I try this ftp not connected
Only telnet

With control of wepif I went to the menu. settings tried to activate ftp with no luck

Στάλθηκε από το SM-A510F μου χρησιμοποιώντας Tapatalk

I used DCC 2.95 and it worked.

here, dcc 2.95 and ftp not connected too, only telnet

 

 

Use multiquickbutton plugin to set some keys...

[takitr]

May be we add usb tuner alien5 config of kernel but I dont know e2procfs support usb tuner. İ merge DST alien5 and k1 pro. Only dvb part is different

Edited by takitr, 14 May 2018 - 17:26.

[engineerkhan15]

@takitr:

Can't we edit Linux kernel recipe file "linux-linkdroid_3.14.29.bb" to add path for tuner avl6862 driver?

DESCRIPTION = "Linux kernel for the linkdroid device"
SECTION = "kernel"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"

DEPENDS = "lzop-native virtual/${TARGET_PREFIX}gcc"

inherit kernel machine_kernel_pr

LOCALVERSION ?= ""
MACHINE_KERNEL_PR_append = ".0"
SRCDATE = "20180513"

SRC_URI[md5sum] = "feb69ff3381eed09f6442bc2a42f9146"
SRC_URI[sha256sum] = "cf7bfbcb7caa451d270f7b80b283af69787428ad16f78ecc8c8395f7cdc3904b"

SRC_URI += "http://source.mynonpublic.com/linkdroid/linux-${PV}-${SRCDATE}.tar.xz \
    file://defconfig \
    file://${MACHINE}.dts \
"

S = "${WORKDIR}/common"
B = "${WORKDIR}/build"

do_configure_prepend () {
   cp -f ${WORKDIR}/${MACHINE}.dts ${S}/arch/arm64/boot/dts/amlogic/
}

do_compile_prepend () {
  install -d ${B}/drivers/amlogic/amports/
  cp -fr ${S}/drivers/amlogic/amports/amstream.o  ${B}/drivers/amlogic/amports/
  install -d ${B}/drivers/amlogic/dvb_tv/
  cp -fr ${S}/drivers/amlogic/dvb_tv/aml.o  ${B}/drivers/amlogic/dvb_tv/
  cp -fr ${S}/drivers/amlogic/dvb_tv/aml_fe.o  ${B}/drivers/amlogic/dvb_tv/
  install -d ${B}/drivers/amlogic/dvb_tv/smartcard
  cp -fr ${S}/drivers/amlogic/dvb_tv/smartcard/smartcard.o  ${B}/drivers/amlogic/dvb_tv/smartcard/
  install -d ${B}/drivers/amlogic/dvb_tv/dm6k/
  cp -fr ${S}/drivers/amlogic/dvb_tv/dm6k/dm6000_fe.o  ${B}/drivers/amlogic/dvb_tv/dm6k/
  install -d ${B}/drivers/media/dvb-core/
  cp -fr ${S}/drivers/media/dvb-core/dvb-core.o  ${B}/drivers/media/dvb-core/
  if test -n "${KERNEL_DEVICETREE}"; then
      for DTB in ${KERNEL_DEVICETREE}; do
          if echo ${DTB} | grep -q '/dts/'; then
              bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used."
              DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'`
          fi
          oe_runmake ${DTB}
      done
  # Create directory, this is needed for out of tree builds
  mkdir -p ${B}/arch/arm64/boot/dts/amlogic/
  fi
}

do_compile_append() {
    cp ${B}/arch/arm64/boot/dts/amlogic/${MACHINE}.dtb ${B}/arch/arm64/boot/
}

do_rm-work() {
}

[frankviana]

May be we add usb tuner alien5 config of kernel but I dont know e2procfs support usb tuner. İ merge DST alien5 and k1 pro. Only dvb part is different

 

root@alien5:~#lsusb

Bus 001 Device 002: ID 05e3:0610
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 001 Device 003: ID 734c:5925 (TBS 5925)
Bus 001 Device 004: ID 187f:0600 (ISDB TUNER MYGICA S270) = same GENIATEK S880)

Bus 001 Device 005: ID 1a2c:0023
root@alien5:~#

root@alien5:~#
opkg install kernel-module-smsdvb kernel-module-smsmdtv kernel-mod
dule-smssdio kernel-module-smsusb \
> enigma2-plugin-drivers-dvb-usb-siano firmware-dvb-siano


Couldn't find anything to satisfy 'kernel-module-smssdio'.

Unknown package 'kernel-module-smsdvb'.
Unknown package 'kernel-module-smsmdtv'.

Unknown package 'kernel-module-smssdio'.
Unknown package 'kernel-module-smsusb'.
Package enigma2-plugin-drivers-dvb-usb-siano (1.0-r0) installed in root is up to date.
Package firmware-dvb-siano (1.0-r0) installed in root is up to date.

Collected errors:

 * opkg_solver_install: Cannot install package kernel-module-smsdvb.
 * opkg_solver_install: Cannot install package kernel-module-smsmdtv.
 * opkg_solver_install: Cannot install package kernel-module-smssdio.
 * opkg_solver_install: Cannot install package kernel-module-smsusb.
root@alien5:~#

 

My ftp don't work. I have all missing ipk files to test usb dvb ISDB-T tuner.

[engineerkhan15]

 

May be we add usb tuner alien5 config of kernel but I dont know e2procfs support usb tuner. İ merge DST alien5 and k1 pro. Only dvb part is different

 

root@alien5:~#lsusb

Bus 001 Device 002: ID 05e3:0610
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 001 Device 003: ID 734c:5925 (TBS 5925)
Bus 001 Device 004: ID 187f:0600 (ISDB TUNER MYGICA S270) = same GENIATEK S880)

Bus 001 Device 005: ID 1a2c:0023
root@alien5:~#

root@alien5:~#
opkg install kernel-module-smsdvb kernel-module-smsmdtv kernel-mod
dule-smssdio kernel-module-smsusb \
> enigma2-plugin-drivers-dvb-usb-siano firmware-dvb-siano


Couldn't find anything to satisfy 'kernel-module-smssdio'.

Unknown package 'kernel-module-smsdvb'.
Unknown package 'kernel-module-smsmdtv'.

Unknown package 'kernel-module-smssdio'.
Unknown package 'kernel-module-smsusb'.
Package enigma2-plugin-drivers-dvb-usb-siano (1.0-r0) installed in root is up to date.
Package firmware-dvb-siano (1.0-r0) installed in root is up to date.

Collected errors:

 * opkg_solver_install: Cannot install package kernel-module-smsdvb.
 * opkg_solver_install: Cannot install package kernel-module-smsmdtv.
 * opkg_solver_install: Cannot install package kernel-module-smssdio.
 * opkg_solver_install: Cannot install package kernel-module-smsusb.
root@alien5:~#

 

My ftp don't work. I have all missing ipk files to test usb dvb ISDB-T tuner.

 

Sometimes, FTP does not connect successfully. I my case it first connected successfully but after making some modifications to the filesystem it did not connect and only telnet was connecting. Then I re-installed the image on sd card again and it was all OK again. You may also try by re-installing it.

[frankviana]

 

May be we add usb tuner alien5 config of kernel but I dont know e2procfs support usb tuner. İ merge DST alien5 and k1 pro. Only dvb part is different

 

root@alien5:~#lsusb

Bus 001 Device 002: ID 05e3:0610
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 001 Device 003: ID 734c:5925 (TBS 5925)
Bus 001 Device 004: ID 187f:0600 (ISDB TUNER MYGICA S270) = same GENIATEK S880)

Bus 001 Device 005: ID 1a2c:0023
root@alien5:~#

root@alien5:~#
opkg install kernel-module-smsdvb kernel-module-smsmdtv kernel-mod
dule-smssdio kernel-module-smsusb \
> enigma2-plugin-drivers-dvb-usb-siano firmware-dvb-siano


Couldn't find anything to satisfy 'kernel-module-smssdio'.

Unknown package 'kernel-module-smsdvb'.
Unknown package 'kernel-module-smsmdtv'.

Unknown package 'kernel-module-smssdio'.
Unknown package 'kernel-module-smsusb'.
Package enigma2-plugin-drivers-dvb-usb-siano (1.0-r0) installed in root is up to date.
Package firmware-dvb-siano (1.0-r0) installed in root is up to date.

Collected errors:

 * opkg_solver_install: Cannot install package kernel-module-smsdvb.
 * opkg_solver_install: Cannot install package kernel-module-smsmdtv.
 * opkg_solver_install: Cannot install package kernel-module-smssdio.
 * opkg_solver_install: Cannot install package kernel-module-smsusb.
root@alien5:~#

 

My ftp don't work. I have all missing ipk files to test usb dvb ISDB-T tuner.

 

 

Incompatible arch for all my ipk files...

 

root@alien5:/media/sda1/isdbt# cat /proc/cpuinfo

 

Processor       : AArch64 Processor rev 4 (aarch64)
processor       : 0
processor       : 1
processor       : 2
processor       : 3
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: AArch64
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4

Hardware        : Amlogic
Serial          : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

root@alien5:/media/sda1/isdbt#

 

Where I find this modules? I need to test my usb ISDB-T tuner.

[takitr]

You should recompile oe-alliance 4.1 linkdroid a5 with New kernel config. You can add your tuner driver config. After compile

Edited by takitr, 14 May 2018 - 19:39.

[frankviana]

You should recompile oe-alliance 4.1 linkdroid a5 with New kernel config. You can add your tuner driver config. After compile

 

Do you have steps? I did only for raspberrypi3 openpli...

 

here? https://github.com/o...uild-enviroment

Edited by frankviana, 14 May 2018 - 19:46.

[frankviana]

 

You should recompile oe-alliance 4.1 linkdroid a5 with New kernel config. You can add your tuner driver config. After compile

 

Do you have steps? I did only for raspberrypi3 openpli...

 

here? https://github.com/o...uild-enviroment

 

MACHINE=linkdroid DISTRO=linkdroid make image

linkdroid only?

Edited by frankviana, 14 May 2018 - 19:50.

[thmls]

I try with hotkey and green button not work to save

Install again and ftp connected


I use remote.conf from vidmod kii pro and key 'menu' not work

user: root
pass: pure2

I try this ftp not connected
Only telnet

With control of wepif I went to the menu. settings tried to activate ftp with no luck

Στάλθηκε από το SM-A510F μου χρησιμοποιώντας Tapatalk

I used DCC 2.95 and it worked.

here, dcc 2.95 and ftp not connected too, only telnet

Use multiquickbutton plugin to set some keys...

[frankviana]

 

 

You should recompile oe-alliance 4.1 linkdroid a5 with New kernel config. You can add your tuner driver config. After compile

 

Do you have steps? I did only for raspberrypi3 openpli...

 

here? https://github.com/o...uild-enviroment

 

MACHINE=linkdroid DISTRO=linkdroid make image

linkdroid only?

 

 

I think now is correct (for openatv)...

MACHINE=alien5 DISTRO=openatv make image

[frankviana]

You should recompile oe-alliance 4.1 linkdroid a5 with New kernel config. You can add your tuner driver config. After compile

 

please help me:

 

 alien5.txt   14.5KB   9 downloads

[satforindo]

 

Hi guys.

This is my first build using meta-dinobot from PLi-Metas.

Image built successfully, but Remote Control doesn't work. I can't setup anything then on the first boot up.

Need help.

Try compiling again as I did add some files to https://github.com/P...extra_rc_models

 

 

I've compiled with the latest update, but the problem persists.

[satforindo]

By the way, I filed an issue on github here:

 

https://github.com/P...extras/issues/7

[HFX]

After online update from yesterday the Dreambox920 not reboot

[ras]

ras@ras-EP45-DS5:~/openpli-oe-core$ MACHINE=enfinity make image
Building image for enfinity
Loading cache: 100% |############################################| Time: 0:00:01
Loaded 3543 entries from dependency cache.
WARNING: /home/ras/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules.conf: file could not be found
WARNING: /home/ras/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark.bb: Unable to get checksum for fulan-dvb-modules-spark SRC_URI entry modules-conf.conf: file could not be found
WARNING: /home/ras/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules.conf: file could not be found
WARNING: /home/ras/openpli-oe-core/pli-extras/meta-fulan/recipes-bsp/drivers/fulan-dvb-modules-spark7162.bb: Unable to get checksum for fulan-dvb-modules-spark7162 SRC_URI entry modules-conf.conf: file could not be found
Parsing recipes: 100% |##########################################| Time: 0:00:41
Parsing of 3015 .bb files complete (2733 cached, 282 parsed). 3825 targets, 649 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.34.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "ubuntu-18.04"
TARGET_SYS        = "mipsel-oe-linux"
MACHINE           = "enfinity"
DISTRO            = "openpli"
DISTRO_VERSION    = "homebuild"
TUNE_FEATURES     = "o32 fpu-hard mips32"
TARGET_FPU        = ""
meta-oe           
meta-filesystems  
meta-multimedia   
meta-networking   
meta-python       
meta-webserver    = "HEAD:dfbdd28d206a74bf264c2f7ee0f7b3e5af587796"
meta              = "HEAD:93dd2f9f3edf0584f9e806c629611d645dd72dbf"
meta-openpli      = "develop:d500707f450cd8a050b5e2eb08efeaf085bc9b8a"
meta-vuplus       = "HEAD:525268ac0f87dd649105ae74114fe6989774cce2"
meta-xsarius.pli5 = "HEAD:7a1ebdc040bfb4aa01d03bcaab0c60c2c781aebd"
meta-qviart       = "HEAD:ec1024e48a52e6436e5bcdf21cb4250122440806"
meta-xp           = "HEAD:2f818d2ee1efbf0a4536d8384d716a0767cf7039"
meta-xtrend       = "HEAD:ac054abbe235f33f6a69e7a8ff0fa9a7efa84f59"
meta-formuler     = "HEAD:e1d33c48edb119dcc3163855b0b1af510912ef52"
meta-gfutures     = "HEAD:15b13a0668f96a3151a1a273a7d742c6fcf1cb80"
meta-xpeedc       = "HEAD:f12908a5573de8a6a06ad9f75081846a590511c4"
meta-zgemma       = "HEAD:b666cdc40132e2a8bf44551680ae76a53c125cbf"
meta-edision      = "HEAD:d792a8d81164ad0fed279a453350a3b965032169"
meta-miraclebox   = "HEAD:d44871d4d1f357d5b38488ed505b48fa8c8feff3"
meta-spycat       = "HEAD:a19f11bbcdcad969e9f6f8d2c30df0653427d4cb"
meta-gi           = "HEAD:01fd1e8256f53d40371e65514e13a53ef53e400d"
meta-sab          = "HEAD:92262feb14e4005c8096150daac7313e9cb3d85a"
meta-gigablue     = "HEAD:8d3c8baa4f7d6bb241f13d212fd3a1b251d2ada3"
meta-amiko        = "HEAD:eb5c966a3ba38388abdcda61ed07fb056e4d488b"
meta-axasuhd      = "HEAD:a24082ff56ed6e21d642af6e390b6e4de4aea456"
meta-local        = "develop:d500707f450cd8a050b5e2eb08efeaf085bc9b8a"
meta-qt5          = "HEAD:c6aa602d0640040b470ee81de39726276ddc0ea3"
meta-amlogic      = "HEAD:e0b0a946669e8bd6da842a83ad6978f5d70213eb"
meta-azbox        = "HEAD:4baf6b76cb2fd48891df9fe8d69a59ecc8f3c298"
meta-ceryon       = "HEAD:5107e3ce2bcd86f372b3fe019d163b3fc5afa10d"
meta-dags         = "HEAD:c0b9f09093eac7477cb24bed36a8e625eb3d5a96"
meta-dinobot      = "HEAD:3f4ee7a0f0aff8eb3dd9df4b306450eb0b6fd992"
meta-dream        = "HEAD:b36dc860a1208c5f22b0a6166d6bc2bc76a51079"
meta-entwopia     = "HEAD:1e2a7a434b90c2e9d1f01bc2deb8ab2eee931019"
meta-fulan        = "HEAD:19a39a5b561e1a6a60c8e8ad38eecd511f5cfddd"
meta-ini          = "HEAD:6a8d579ead853aa9f223e3462f825c5739a3dc77"
meta-octagon      = "HEAD:3007bf7387709ae2be53bdc66047dc28b9851ded"
meta-odin         = "HEAD:6814cdda4d14e71850f30d78d5be7ebcc77721a2"
meta-raspberrypi  = "HEAD:d95f0b61526c5d0fae82f43463280ad6aecd3087"
meta-xcore        = "HEAD:cff65e53f01c8e06ddc8a08dcb15002a562c0193"
pli-extras        = "develop:4d9431713be10d5fa184d78fc01be72f4607d609"

Initialising tasks: 100% |#######################################| Time: 0:00:26
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 5796 tasks of which 5773 didn't need to be rerun and all succeeded.

Summary: There were 4 WARNING messages shown.

[ras]

the display is on "Run",no boot ?

Edited by ras, 15 May 2018 - 16:54.

[HFX]

Have the backup put back and now again an online update and now the dbx920 does start ,,, but that's strange, but it's nice that it works now

[rantanplan]

is usually a mistake of flashing.
Simply copy the image again and unpack it on the stick.
Then try again.