2740 replies to this topic

[moham96]

 

root@alien5:~# cat /proc/bus/nim_sockets

 

NIM Socket 0:
      Type: DVB-S2
      Name: 6000
      Has_Outputs: no
      Frontend_Device: 0

NIM Socket 1:
      Type: DVB-C
      Name: 60001
      Has_Outputs: no
      Frontend_Device: 1

NIM Socket 2:
      Type: DVB-T2
      Name: 60002
      Has_Outputs: no
      Frontend_Device: 2

root@alien5:~#
 

root@alien5:~# lsmod

Module                  Size  Used by
se2io_se               98859  0
mali                  240156  0
ampanel                 8967  0
e2_procfs              52052  0
8189es               1115416  0
cfg80211              380545  1 8189es

root@alien5:~#
 

 

This is strange since alien5 kernel uses a5stb kernel module for e2procfs while your lsmod output shows a different module(e2_procfs)  can you upload the e2_procfs.ko ?

also I can see you have nim_sockets setup, does enigma2 work for you ?does it scan and tune into channels?

[frankviana]

 

 

root@alien5:~# cat /proc/bus/nim_sockets

 

NIM Socket 0:
      Type: DVB-S2
      Name: 6000
      Has_Outputs: no
      Frontend_Device: 0

NIM Socket 1:
      Type: DVB-C
      Name: 60001
      Has_Outputs: no
      Frontend_Device: 1

NIM Socket 2:
      Type: DVB-T2
      Name: 60002
      Has_Outputs: no
      Frontend_Device: 2

root@alien5:~#
 

root@alien5:~# lsmod

Module                  Size  Used by
se2io_se               98859  0
mali                  240156  0
ampanel                 8967  0
e2_procfs              52052  0
8189es               1115416  0
cfg80211              380545  1 8189es

root@alien5:~#
 

 

This is strange since alien5 kernel uses a5stb kernel module for e2procfs while your lsmod output shows a different module(e2_procfs)  can you upload the e2_procfs.ko ?

also I can see you have nim_sockets setup, does enigma2 work for you ?does it scan and tune into channels?

 

 

Where I find e2_procfs.ko ?

[frankviana]

I found only this module: a5stb.ko (3.14.29/kernel/drivers/a5)

 

Here all folder 3.14.29

 

http://www.mediafire.../?97ebehxn46deq

 

Here some screenshots (scan):

 

 screenshot_20180717211741.jpg   56.72KB   8 downloads

 

 screenshot_20180717211708.jpg   40.37KB   10 downloads

 

 screenshot_20180717211658.jpg   49.39KB   8 downloads

 

 screenshot_20180717211610.jpg   63.06KB   8 downloads

 

 screenshot_20180717211202.jpg   69.76KB   8 downloads

 

 screenshot_20180717211148.jpg   57.98KB   8 downloads

 

 screenshot_20180717211132.jpg   51.84KB   8 downloads

 

 screenshot_20180717211120.jpg   59.98KB   8 downloads

 

 screenshot_20180717211059.jpg   83.7KB   7 downloads

 

 screenshot_20180717211050.jpg   51.93KB   7 downloads

 

 screenshot_20180717202639.jpg   54.6KB   7 downloads

 

 screenshot_20180717202559.jpg   51.44KB   7 downloads

 

[frankviana]

 

 

root@alien5:~# cat /proc/bus/nim_sockets

 

NIM Socket 0:
      Type: DVB-S2
      Name: 6000
      Has_Outputs: no
      Frontend_Device: 0

NIM Socket 1:
      Type: DVB-C
      Name: 60001
      Has_Outputs: no
      Frontend_Device: 1

NIM Socket 2:
      Type: DVB-T2
      Name: 60002
      Has_Outputs: no
      Frontend_Device: 2

root@alien5:~#
 

root@alien5:~# lsmod

Module                  Size  Used by
se2io_se               98859  0
mali                  240156  0
ampanel                 8967  0
e2_procfs              52052  0
8189es               1115416  0
cfg80211              380545  1 8189es

root@alien5:~#
 

 

This is strange since alien5 kernel uses a5stb kernel module for e2procfs while your lsmod output shows a different module(e2_procfs)  can you upload the e2_procfs.ko ?

also I can see you have nim_sockets setup, does enigma2 work for you ?does it scan and tune into channels?

 

 

Enigma2 working fine setup scan, including save all choices (configurations: all disecq, lnb, etc) but no tune (signal) channels

 

Media player show video, but sound only first 5 seconds... plugins ok...

[frankviana]

I found only this module: a5stb.ko (3.14.29/kernel/drivers/a5)

 

Here all folder 3.14.29

 

http://www.mediafire.../?97ebehxn46deq

 

Sorry: mediafire link broken:

 

New link (modules/kernel): http://www.mediafire...odules.zip/file

[frankviana]

More pictures, but no signal. The problem is only the signal ... all configurations show fine for all 2/combo/hybrid tuners (s2, C and T/T2)

 

 multisat s2.jpg   66.52KB   7 downloads

 

 dvb-c (pre).jpg   60.86KB   8 downloads

 

 dvb-c (complete).jpg   50.1KB   7 downloads

 

 dvb-t (pre).jpg   72.32KB   7 downloads

 

 dvb-t2.jpg   73.47KB   7 downloads

 

 terrestrial.jpg   64.23KB   7 downloads

Edited by frankviana, 17 July 2018 - 20:42.

[moham96]

 

 

 

root@alien5:~# cat /proc/bus/nim_sockets

 

NIM Socket 0:
      Type: DVB-S2
      Name: 6000
      Has_Outputs: no
      Frontend_Device: 0

NIM Socket 1:
      Type: DVB-C
      Name: 60001
      Has_Outputs: no
      Frontend_Device: 1

NIM Socket 2:
      Type: DVB-T2
      Name: 60002
      Has_Outputs: no
      Frontend_Device: 2

root@alien5:~#
 

root@alien5:~# lsmod

Module                  Size  Used by
se2io_se               98859  0
mali                  240156  0
ampanel                 8967  0
e2_procfs              52052  0
8189es               1115416  0
cfg80211              380545  1 8189es

root@alien5:~#
 

 

This is strange since alien5 kernel uses a5stb kernel module for e2procfs while your lsmod output shows a different module(e2_procfs)  can you upload the e2_procfs.ko ?

also I can see you have nim_sockets setup, does enigma2 work for you ?does it scan and tune into channels?

 

 

Where I find e2_procfs.ko ?

 

You can run the following command which will give you the path to the .ko file

modinfo e2_procfs

[frankviana]

 

 

 

 

root@alien5:~# cat /proc/bus/nim_sockets

 

NIM Socket 0:
      Type: DVB-S2
      Name: 6000
      Has_Outputs: no
      Frontend_Device: 0

NIM Socket 1:
      Type: DVB-C
      Name: 60001
      Has_Outputs: no
      Frontend_Device: 1

NIM Socket 2:
      Type: DVB-T2
      Name: 60002
      Has_Outputs: no
      Frontend_Device: 2

root@alien5:~#
 

root@alien5:~# lsmod

Module                  Size  Used by
se2io_se               98859  0
mali                  240156  0
ampanel                 8967  0
e2_procfs              52052  0
8189es               1115416  0
cfg80211              380545  1 8189es

root@alien5:~#
 

 

This is strange since alien5 kernel uses a5stb kernel module for e2procfs while your lsmod output shows a different module(e2_procfs)  can you upload the e2_procfs.ko ?

also I can see you have nim_sockets setup, does enigma2 work for you ?does it scan and tune into channels?

 

 

Where I find e2_procfs.ko ?

 

You can run the following command which will give you the path to the .ko file

modinfo e2_procfs

 Sem título.png   60.34KB   7 downloads

 

root@alien5:~#modinfo e2_procfs

modinfo: ERROR: Module e2_procfs not found.

root@alien5:~#

[frankviana]

enigma2 log:

 

Here the 3 tuners (A/B/C):

 

19:02:33.8937  /usr/lib64/enigma2/python/Components/NimManager.py:164  update  sec config cleared
19:02:33.8947  dvb/frontend.cpp:3874  setSlotInfo  [eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr 6000, need rotorworkaround No, enabled Yes, DVB-S2 Yes
19:02:33.8948  dvb/frontend.cpp:3874  setSlotInfo  [eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr 60001, need rotorworkaround No, enabled Yes, DVB-S2 No
19:02:33.8948  dvb/frontend.cpp:3874  setSlotInfo  [eDVBFrontend] setSlotInfo for dvb frontend 2 to slotid 2, descr 60002, need rotorworkaround No, enabled Yes, DVB-S2 No
19:02:33.8952  /usr/lib64/enigma2/python/Components/NimManager.py:232  update  slot: 0 configmode: simple
19:02:33.8953  dvb/sec.cpp:1955  setSlotNotLinked  eDVBSatelliteEquipmentControl::setSlotNotLinked(0)
19:02:33.8954  /usr/lib64/enigma2/python/Components/NimManager.py:240  update  diseqcmode:  single
19:02:33.8957  /usr/lib64/enigma2/python/Components/NimManager.py:308  update  slot: 1 configmode: enabled
19:02:33.8959  /usr/lib64/enigma2/python/Components/NimManager.py:305  update  slot: 2 configmode: enabled
19:02:33.8961  /usr/lib64/enigma2/python/Components/NimManager.py:327  update  sec config completed
19:02:33.8963  /usr/lib64/enigma2/python/Components/NimManager.py:2305  InitNimManager  [NimManager] slotname = A, slotdescription = 6000, multitype = False, current type = DVB-S2
19:02:33.8964  /usr/lib64/enigma2/python/Components/NimManager.py:2305  InitNimManager  [NimManager] slotname = B, slotdescription = 60001, multitype = False, current type = DVB-C
19:02:33.8965  /usr/lib64/enigma2/python/Components/NimManager.py:2305  InitNimManager  [NimManager] slotname = C, slotdescription = 60002, multitype = False, current type = DVB-T2

Edited by frankviana, 17 July 2018 - 20:58.

[moham96]

 

 

 

 

 

root@alien5:~# cat /proc/bus/nim_sockets

 

NIM Socket 0:
      Type: DVB-S2
      Name: 6000
      Has_Outputs: no
      Frontend_Device: 0

NIM Socket 1:
      Type: DVB-C
      Name: 60001
      Has_Outputs: no
      Frontend_Device: 1

NIM Socket 2:
      Type: DVB-T2
      Name: 60002
      Has_Outputs: no
      Frontend_Device: 2

root@alien5:~#
 

root@alien5:~# lsmod

Module                  Size  Used by
se2io_se               98859  0
mali                  240156  0
ampanel                 8967  0
e2_procfs              52052  0
8189es               1115416  0
cfg80211              380545  1 8189es

root@alien5:~#
 

 

This is strange since alien5 kernel uses a5stb kernel module for e2procfs while your lsmod output shows a different module(e2_procfs)  can you upload the e2_procfs.ko ?

also I can see you have nim_sockets setup, does enigma2 work for you ?does it scan and tune into channels?

 

 

Where I find e2_procfs.ko ?

 

You can run the following command which will give you the path to the .ko file

modinfo e2_procfs

Sem título.png

 

root@alien5:~#modinfo e2_procfs

modinfo: ERROR: Module e2_procfs not found.

root@alien5:~#

 

why does lsmod show the module as loaded and modinfo can't find it try to cat the modules node to make sure the module is loaded

cat /proc/modules

also I think the nim_sockets file is fake and you don't have dvb drivers loaded:

post the output of this:

ls -la /dev/dvb*

[takitr]

modinfo a5stb.ko
Here is the answer. a4stb.ko include e2procfs and a5 kernel source dvbtv part and amcodec part closed source (.o)

Edited by takitr, 17 July 2018 - 21:06.

[frankviana]

root@alien5:~#cat /proc/modules

se2io_se 98859 0 - Live 0xffffffbffc225000
mali 240156 0 - Live 0xffffffbffc1d6000 (O)
ampanel 8967 0 - Live 0xffffffbffc1cf000
e2_procfs 52052 0 - Live 0xffffffbffc1bc000 (O)
8189es 1115416 0 - Live 0xffffffbffc084000 (O)
cfg80211 380545 1 8189es, Live 0xffffffbffc000000

root@alien5:~# ls -la /dev/dvb*

drwxr-xr-x    3 root     root            60 Jan  1  1970 .
drwxr-xr-x   11 root     root         14700 Jul 17 21:07 ..
drwxr-xr-x    2 root     root           400 Jul 17 21:07 adapter0

root@alien5:~#

 

 Sem título2.png   142.43KB   8 downloads

[takitr]

Vitmod ported e2procfs and nimdetec k series. But no puplic sources. Vitmod openatv, nutrino works nicely Wè need C++ devoloper help

Edited by takitr, 17 July 2018 - 21:09.

[bumperbee]

Try compiling with my new changes

 

Hi Persian Prince, thanks for the advice. I tried many times compiling before but failed, I even got my whole hard disk being wipe out.

[frankviana]

modinfo a5stb.ko
Here is the answer. a4stb.ko include e2procfs and a5 kernel source dvbtv part and amcodec part closed source (.o)

 

 Sem título5.png   65.41KB   7 downloads

[bumperbee]

Currently a temporary solution for bumperbee, so he can use it with his box until it's done:

dm7020hdv2-image-17.07.2018
https://www.online.e...2a-d6bd1f8f3221

(or use the previous version, what worked for him)

 

Thanks Zeros

[takitr]

Goto
cd /lib/modules/3.14.29/kernel/drivers/a5
after check ls command
modinfo a5stb.ko

[takitr]

Goto
cd /lib/modules/3.14.29/kernel/drivers/a5
after check ls command
modinfo a5stb.ko

[moham96]

 

modinfo a5stb.ko
Here is the answer. a4stb.ko include e2procfs and a5 kernel source dvbtv part and amcodec part closed source (.o)

 

Sem título5.png

 

if takitr is currect the right command would be without the .ko extension

modinfo a4stb

or maybe

modinfo a5stb

[moham96]

root@alien5:~#cat /proc/modules

se2io_se 98859 0 - Live 0xffffffbffc225000
mali 240156 0 - Live 0xffffffbffc1d6000 (O)
ampanel 8967 0 - Live 0xffffffbffc1cf000
e2_procfs 52052 0 - Live 0xffffffbffc1bc000 (O)
8189es 1115416 0 - Live 0xffffffbffc084000 (O)
cfg80211 380545 1 8189es, Live 0xffffffbffc000000

root@alien5:~# ls -la /dev/dvb*

drwxr-xr-x    3 root     root            60 Jan  1  1970 .
drwxr-xr-x   11 root     root         14700 Jul 17 21:07 ..
drwxr-xr-x    2 root     root           400 Jul 17 21:07 adapter0

root@alien5:~#

 

Sem título2.png

ok so you have dvb drivers loaded, can you run this to see which driver:

readlink -f  $(readlink -f /sys/class/dvb/dvb0.frontend0/device)/driver/module