Very sorry Beeker, I do it again
Howto build unofficial pli for your unsupported receiver
Re: Howto build unofficial pli for your unsupported receiver #1661
Re: Howto build unofficial pli for your unsupported receiver #1662
Posted 15 July 2018 - 01:17
Hi Beeker, after redoing this, the plugins i need are in the feeds. I am please to append the result as per below,
Re: Howto build unofficial pli for your unsupported receiver #1663
Re: Howto build unofficial pli for your unsupported receiver #1664
Re: Howto build unofficial pli for your unsupported receiver #1665
Posted 15 July 2018 - 02:25
Hi Zeros, thanks very much for all the images you had built for me and I felt regrettable to find out it works well only on my 2nd attempt on the flashing of your initial 1st image dated 7th July 2018 which I do not understand why it continue to reboot non-stop on my 1st installation attempt.
I had noticed that the Osd size in this image had been adjusted to fit the Tv screen for the top & bottom right corner. Could you teach me how to do this please?
Re: Howto build unofficial pli for your unsupported receiver #1666
Posted 15 July 2018 - 07:34
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Re: Howto build unofficial pli for your unsupported receiver #1667
Posted 15 July 2018 - 11:28
to MasterG and Persian Prince ... as this unoficial opli could you please make a liitle change like i already mentioned it in this topic https://forums.openp...very-important/
its about to make a update for epgcache in short time instead of 60min which is the default value ...
I will make this available for you but not as a global thing and probably with a switch or something.
Persian Prince you forgot about this ... please do it for dm520
Done: https://github.com/P...22aea887753fe36
Example for dm520:
Change https://github.com/P...e/dm520.conf#L7 to
MACHINE_FEATURES += "libpassthrough recovery epgcache1"Test image: http://www.mediafire...tfs.tar.xz/file (I'm not sure about the boot status of the image itself)
Others could use "epgcache1" feature too as it seems it's a good feature for EPG: https://forums.openp...very-important/
Good luck
thank you so much persian prince but the link of mediafire don't work
Re: Howto build unofficial pli for your unsupported receiver #1668
Posted 15 July 2018 - 11:58
to MasterG and Persian Prince ... as this unoficial opli could you please make a liitle change like i already mentioned it in this topic https://forums.openp...very-important/
its about to make a update for epgcache in short time instead of 60min which is the default value ...
I will make this available for you but not as a global thing and probably with a switch or something.
Persian Prince you forgot about this ... please do it for dm520
Done: https://github.com/P...22aea887753fe36
Example for dm520:
Change https://github.com/P...e/dm520.conf#L7 toMACHINE_FEATURES += "libpassthrough recovery epgcache1"Test image: http://www.mediafire...tfs.tar.xz/file (I'm not sure about the boot status of the image itself)
Others could use "epgcache1" feature too as it seems it's a good feature for EPG: https://forums.openp...very-important/
Good luck
thank you so much persian prince but the link of mediafire don't work
Test images are only available for a limited time
You can compile it yourself.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #1669
Posted 15 July 2018 - 16:43
Unfortunately It doesn't solve the issue
Old dvb api patch for enigma2: https://github.com/P...ld_dvbapi.patch
https://github.com/o...fb601194a53a94f
[alien5] add some hacks for testing
https://github.com/o...a96d45349a6078e
https://github.com/o...c13b9024070d095
should be openpli enigma2 source not full compality. Look at some patch
ioctl(m_fd, FE_READ_STATUS
Re: Howto build unofficial pli for your unsupported receiver #1670
Re: Howto build unofficial pli for your unsupported receiver #1671
Posted 15 July 2018 - 17:39
Guys, if not difficult, please respond, why is not going to image? What needs to be corrected? I've tried it 5 times already, nothing comes out.
https://forums.openp...-63#entry907663
Please!
Re: Howto build unofficial pli for your unsupported receiver #1672
Posted 15 July 2018 - 18:24
Add alien5
https://github.com/o...6c904a2f5b4cb3a
I don't work on meta-amlogic anymore (except simple updates), if you have any changes send a PR then I will merge it.
Edited by Persian Prince, 15 July 2018 - 18:25.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #1673
Posted 15 July 2018 - 18:25
Guys, if not difficult, please respond, why is not going to image? What needs to be corrected? I've tried it 5 times already, nothing comes out.
https://forums.openp...-63#entry907663
Please!
Only @MastaG works on sh4 and spark models so wait for him
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #1674
Re: Howto build unofficial pli for your unsupported receiver #1675
Re: Howto build unofficial pli for your unsupported receiver #1676
Posted 15 July 2018 - 21:41
Add alien5
https://github.com/o...6c904a2f5b4cb3aI don't work on meta-amlogic anymore (except simple updates), if you have any changes send a PR then I will merge it.
I try to fix the frontend detect but i cannot make image
because i have this error:
ERROR: linkdroid-libamadec-alien5-0.1-r0 do_fetch: Fetcher failure for URL: 'http://source.mynonpublic.com/linkdroid/linkdroid-libamadec-alien5-20180712.zip'. Unable to fetch URL from any source.
Can you only fix this?
Re: Howto build unofficial pli for your unsupported receiver #1677
Posted 16 July 2018 - 01:10
Add alien5
https://github.com/o...6c904a2f5b4cb3aI don't work on meta-amlogic anymore (except simple updates), if you have any changes send a PR then I will merge it.
I try to fix the frontend detect but i cannot make image
because i have this error:
ERROR: linkdroid-libamadec-alien5-0.1-r0 do_fetch: Fetcher failure for URL: 'http://source.mynonpublic.com/linkdroid/linkdroid-libamadec-alien5-20180712.zip'. Unable to fetch URL from any source.Can you only fix this?
Replace SRCDATE = "20180712" with SRCDATE = "20180513" and
SRC_URI[sha256sum] = "47160850982380c59a9a0ac368c141a2818d1e8940cd0a44f01a069df27e95d0"
SRC_URI[md5sum] = "6c9e1620fce5094a6da56e10c0ba2a22" with
SRC_URI[sha256sum] = "c7f71e07b4ff0951d41ea786d7f9471c9f5d8c0e93c8ec895a9cc2a7c8b1287b"
SRC_URI[md5sum] = "3adbd6b0a2c3c01a905c0475c3e6d66d" at https://github.com/P...c-alien5_0.1.bbRe: Howto build unofficial pli for your unsupported receiver #1678
Posted 16 July 2018 - 12:02
Unfortunately It doesn't solve the issueOld dvb api patch for enigma2: https://github.com/P...ld_dvbapi.patch
https://github.com/o...fb601194a53a94f
[alien5] add some hacks for testing
https://github.com/o...a96d45349a6078e
https://github.com/o...c13b9024070d095
should be openpli enigma2 source not full compality. Look at some patch
ioctl(m_fd, FE_READ_STATUS
If you have already a build environment setup for openatv can you build an image for alien5 and upload it? I have a shitty internet so it would take much time to download another build environment.
Thanks
Re: Howto build unofficial pli for your unsupported receiver #1679
Posted 16 July 2018 - 12:59
bumperbee , next image dm7020hdv2 ready for test. (OE core up to date)
As we still don't know if the last changes works or not, please test and report.
dm7020hdv2-TEST-image-16.07.2018
https://www.online.e...98-5c15fd5d2bc2
Have you made a fullbackup from your good state? If not, do it before that test.
In this test, if it works, the feed is immediately OK. You need to experiment with your fullbackup as well. A good chance to do it now.
I hope the best and if the TEST image will not boot, try to flash your fullbackup then.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Re: Howto build unofficial pli for your unsupported receiver #1680
Posted 16 July 2018 - 13:12
At the moment, build environment is giving error due to a bitbake bug. But here are the official images of OpenATV & Pur-E2 for Alien5:
OpenATV 6.2:
http://www.mediafire...sdcard.zip/file
Pur-E2 6.2:
http://www.mediafire...15-uSD.zip/file
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users