Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #1801 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 07:39

For me Is boot with gxl_p230_k1_pro.dtb

all work without dvb :(

I have test with my favoris but dvb not work

But thnks :rolleyes:

See my reply to igorg11.

do the same tests and report back please.

also what do you mean dvb not work?

if by that you mean enigma2 doesn't scan then that is to be expected, right now all you can test is the presence of dvb nodes and maybe tune or scan using command line tools

Regards



Re: Howto build unofficial pli for your unsupported receiver #1802 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 07:41

finaly start up with

 

gxl_p230_k1_pro.dtb

what did you change so I make it in the repo for everyone?

also please see my reply to igorg11 and do the tests

 

Thanks



Re: Howto build unofficial pli for your unsupported receiver #1803 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 07:43

 

 

finaly start up with

 

gxl_p230_k1_pro.dtb

How did you do, friend?
Can you post the image?
What a change!

 

http://www.mediafire...sdcard.zip/file

and after add

https://kszaq.libree...p230_k1_pro.dtb

 

if you mean to place the dtb file in the first partition of the sdcard then that won't work since the dtb file is embedded inside the kernel.itb file and you have to either decompile and compile again or just make the change in the recipe files.

 

Thanks



Re: Howto build unofficial pli for your unsupported receiver #1804 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 07:50

Ahh and also to anyone how's testing please test that the ir remote control works, if not check and see if you have the /dev/amremote node.

 

I had to change update the device tree to get the amremote node enabled in k2pro_s905, maybe other devices needs this change too.

 

Regards



Re: Howto build unofficial pli for your unsupported receiver #1805 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 24 July 2018 - 08:46

I had compiled this image for K1 Pro, using your recipe for K2 Pro (old) & CoreELEC kernel (by making necessary amendments) and K1pro.dts (obtained by decompiling dtb file for K1 Pro that comes with CoreELEC).

Box booted well.

Remote control working.

FullHD skin working.

DVB drivers for AVL6862 loaded and detecting the inbuilt tuner as DVB-S/DVB-T tuner (no DVB-C).

Tuner setup worked, scan started for DVB-S and completed as usual but without finding any channel.



Re: Howto build unofficial pli for your unsupported receiver #1806 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 24 July 2018 - 08:53

This is the dmesg.log file for that image of K1 Pro:

 

Attached Files



Re: Howto build unofficial pli for your unsupported receiver #1807 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 24 July 2018 - 09:14

Here is the new test image for K1 Pro, compile this morning from the official "meta-amlogic" after the changes made by Persian Prince last night. I have not tested yet, please test it and let us know the feedback.

http://www.mediafire...24-1_sdcard.zip

 



Re: Howto build unofficial pli for your unsupported receiver #1808 algdu83

  • Senior Member
  • 36 posts

+1
Neutral

Posted 24 July 2018 - 10:06

Here is the new test image for K1 Pro, compile this morning from the official "meta-amlogic" after the changes made by Persian Prince last night. I have not tested yet, please test it and let us know the feedback.

http://www.mediafire...24-1_sdcard.zip

Is booting but remot not work

impossible to test



Re: Howto build unofficial pli for your unsupported receiver #1809 thmls

  • Senior Member
  • 57 posts

+3
Neutral

Posted 24 July 2018 - 10:13

Here is the new test image for K1 Pro, compile this morning from the official "meta-amlogic" after the changes made by Persian Prince last night. I have not tested yet, please test it and let us know the feedback.
http://www.mediafire...24-1_sdcard.zip

Is booting but remot not work
impossible to test
I am in work now
you can use wepif to browse the menu

Re: Howto build unofficial pli for your unsupported receiver #1810 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 10:22

 

Here is the new test image for K1 Pro, compile this morning from the official "meta-amlogic" after the changes made by Persian Prince last night. I have not tested yet, please test it and let us know the feedback.

http://www.mediafire...24-1_sdcard.zip

Is booting but remot not work

impossible to test

 

 

probably needs dtb edit.

you can find the ip of the device from your router and then use telnet to access it and check if /dev/amremote exists or not.

I will edit the dtb now



Re: Howto build unofficial pli for your unsupported receiver #1811 algdu83

  • Senior Member
  • 36 posts

+1
Neutral

Posted 24 July 2018 - 10:59

 

 

Here is the new test image for K1 Pro, compile this morning from the official "meta-amlogic" after the changes made by Persian Prince last night. I have not tested yet, please test it and let us know the feedback.

http://www.mediafire...24-1_sdcard.zip

Is booting but remot not work

impossible to test

 

 

probably needs dtb edit.

you can find the ip of the device from your router and then use telnet to access it and check if /dev/amremote exists or not.

I will edit the dtb now

 

/dev/amremote not exist

i use webif for scan

but same problem

his scan but not find channels

i use my favorit channel

not Working


Edited by algdu83, 24 July 2018 - 11:00.


Re: Howto build unofficial pli for your unsupported receiver #1812 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 24 July 2018 - 11:22

sorry, the device trees for k1plus and k3pro were corrupted, I fixed them and added remote support for all models. Update, rebuild image and test again :)

Re: Howto build unofficial pli for your unsupported receiver #1813 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 24 July 2018 - 15:25

Here are new test images for K1 Pro, K2 Pro (S905) & K3 Pro, compiled after latest changes.

 

K1 Pro:

http://www.mediafire...24-2_sdcard.zip

 

K2 Pro (S905):

http://www.mediafire...24-1_sdcard.zip

 

K3 Pro:

http://www.mediafire...24-1_sdcard.zip



Re: Howto build unofficial pli for your unsupported receiver #1814 sauna

  • Senior Member
  • 38 posts

0
Neutral

Posted 24 July 2018 - 15:34

You can see why the error.or compile an image for k1plus?        https://www.mediafir...Document_2/file



Re: Howto build unofficial pli for your unsupported receiver #1815 satforindo

  • Senior Member
  • 62 posts

0
Neutral

Posted 24 July 2018 - 15:39

sorry, the device trees for k1plus and k3pro were corrupted, I fixed them and added remote support for all models. Update, rebuild image and test again :)

 

May I test for the K1Plus? Have you the image yet?


Edited by Budiarno, 24 July 2018 - 15:39.


Re: Howto build unofficial pli for your unsupported receiver #1816 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 24 July 2018 - 15:58

Here are the test images for K1 Plus & K2 Pro (S905D), compiled after the latest changes today.

 

K1 Plus:

http://www.mediafire...24-1_sdcard.zip

 

K2 Pro (S905D):

http://www.mediafire...24-1_sdcard.zip


Edited by engineerkhan15, 24 July 2018 - 16:00.


Re: Howto build unofficial pli for your unsupported receiver #1817 thmls

  • Senior Member
  • 57 posts

+3
Neutral

Posted 24 July 2018 - 16:29

no boot  KI pro



Re: Howto build unofficial pli for your unsupported receiver #1818 sauna

  • Senior Member
  • 38 posts

0
Neutral

Posted 24 July 2018 - 16:47

k1 plus no boot



Re: Howto build unofficial pli for your unsupported receiver #1819 algdu83

  • Senior Member
  • 36 posts

+1
Neutral

Posted 24 July 2018 - 16:53

Here are new test images for K1 Pro, K2 Pro (S905) & K3 Pro, compiled after latest changes.

 

K1 Pro:

http://www.mediafire...24-2_sdcard.zip

Impossible to test

not boot + problem with resolution



Re: Howto build unofficial pli for your unsupported receiver #1820 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 24 July 2018 - 17:36

Problem lies with the dts files included with the recipes. I replaced with the dts obtained from decompiled dtb from CoreELEC, then it boots OK. But now remote is not working, while it was working OK with last night's image.

I will share new test images shortly.


Edited by engineerkhan15, 24 July 2018 - 17:36.



5 user(s) are reading this topic

0 members, 5 guests, 0 anonymous users