Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #2041 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 9 August 2018 - 21:18

 

Regards

Can you give the output of

blkid

The booting issue might be related to the faulty amlogic emmc drivers, If you have Uart cable that would be useful also

 

Regards

 

Sorry but I don'T have Uart cable.

 

This is the output of

blkid

grab

 

k1plus login: root
root@k1plus:~# blkid
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="1dc052af-fc5c-4690-9ce3-00ae3920916b" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="D18D-D209" TYPE="vfat"
root@k1plus:~# grab
Framebuffer failed
Grabbing Video ...
Resizing Video to 127 x -1627645944 ...
Segmentation fault

 

yes your device has the emmc problem, maybe it's causing the device not to boot, I have no Idea how to solve it without the device by my side, if you know how  compile kernel you can try some kernel configs and see if they change anything



Re: Howto build unofficial pli for your unsupported receiver #2042 thmls

  • Senior Member
  • 57 posts

+3
Neutral

Posted 9 August 2018 - 21:27

ftp21 image
after reboot no boot

Re: Howto build unofficial pli for your unsupported receiver #2043 bumperbee

  • Senior Member
  • 284 posts

+10
Neutral

Posted 9 August 2018 - 21:52

That’s great, thanks very much Master Zeros



Re: Howto build unofficial pli for your unsupported receiver #2044 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 10 August 2018 - 03:22

K1pro: http://www.mediafire...pro_sdcard.zip 


K1 pro

Boot ok, only 31 channels found 58w c band. Good to see my k1 tunning channels. :) :) :)

Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2045 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 10 August 2018 - 03:48

I have the signal (lock) for all transponders using signal finder option, but when scan manually, don't store anymore, only the first.

 

When reboot the device and choosing tuner configuration (dvt-t/atsc) and after dvbs2, we have the option again to scan manually another transponder and find a lot of channels again. The tuner block the firsts transponders until reboot receiver. The first manually search I found 31 channels, the second transponder after reboot, I found 21 channels. :)

 

Attached File  IMG_20180809_232308.jpg   99.72KB   12 downloads

 

Attached File  IMG_20180809_231432.jpg   89.51KB   10 downloads


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2046 frankviana

  • Senior Member
  • 474 posts

+4
Neutral

Posted 10 August 2018 - 03:59

The problem is only to store after first channels... I have the lock/signal tuner for all transponders all time: before or after finish search (manually or automatic scan). Very good sensibility


Dreambox Two, GT-Media V8XS, GT-Media M7x, GT-Media v9 prime, Gt-Media Finder Meter 2, , TBS 6903-x v2, Octagon SF8008 single, Edision OS Mini 4k, Zgemma h9s SE, GT-Media V8UHD, Raspberry Pi 4, T95 Max + (CoreElec/Tvheadend), Freesky Triplo X, Zgemma h9 twin, Zgemma h9s, Amiko SHD 8900, Gt-Media GTC, Octagon SX88+, Octagon SX88, Vu Zero, Vu+ Zero 4K, Mecool K1/K2/K3, Azamerica s2010, Azamerica s810B, Nazabox Xgame, Koqit K1 mini, TBS 5520se, TBS 5925, TBS 6922se, Openbox X5, Openbox S9, AZBOX TITAN twin, AZBOX Premium+, AZBOX Elite , Rasp Pi, Rasp Pi 2/3, Orange Pi PC, Coolsat 5000, Dm528s, DM800se, Satlink 6933, Satlink 6960, Satlink 6932, GT-Media V8, Gt-Media V8 Meter,  PixelView PlayTV USB SBTVD ISDB-T (dib0700), Mygica S270 ISDB-T (Siano Rio). C-Band Motorized dish - 5,00m (20ºE - 116.8ºW), Ku-Band Motorized dish - 1,80m (3ºw - 116,8ºW)


Re: Howto build unofficial pli for your unsupported receiver #2047 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 10 August 2018 - 04:50

guard77, please give some more info. On DM900 UHD, what you use, if the thing was okay a while ago? If so, may need to review the latest changes.
However, I guess I can't help but the ones that read the information about your answers may help.
Thank you for your explanations.


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #2048 algdu83

  • Senior Member
  • 36 posts

+1
Neutral

Posted 10 August 2018 - 07:32

k1_pro

For me Is boot

I have test with my favoris i have signal with all channels but not workin why :(

thnks



Re: Howto build unofficial pli for your unsupported receiver #2049 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 10 August 2018 - 11:33

I have the signal (lock) for all transponders using signal finder option, but when scan manually, don't store anymore, only the first.

 

When reboot the device and choosing tuner configuration (dvt-t/atsc) and after dvbs2, we have the option again to scan manually another transponder and find a lot of channels again. The tuner block the firsts transponders until reboot receiver. The first manually search I found 31 channels, the second transponder after reboot, I found 21 channels. :)

 

attachicon.gifIMG_20180809_232308.jpg

 

attachicon.gifIMG_20180809_231432.jpg

Yes this is a known issue, the tuner is kept locked after the scan, needs resetting



Re: Howto build unofficial pli for your unsupported receiver #2050 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 10 August 2018 - 13:03

 

Why persian prince's images don't work !! @persian any Idea ?

 

you should see four types, if you see only two then probably the dvb drivers are not loaded and enigma is reading the hardcoded nim_sockets

try to ssh into the device and run

lsmod

also boot into the working image(ftp21_)  and run this

echo "dmx0" > /sys/class/stb/source

and then tune into a channel and see if this changes anything

 

Persian Prince:

root@k1pro:~# lsmod
Module                  Size  Used by
mali                  241508  0
e2_procfs              23151  0
r848a                  34309  1
avl6862               253365  1
aml_fe                  5178  0
aml                    91002  1 aml_fe

ftp21_:

No change in behavior after the telnet command: echo "dmx0" > /sys/class/stb/source



Re: Howto build unofficial pli for your unsupported receiver #2051 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 10 August 2018 - 17:41

 

Regards

Can you give the output of

blkid

The booting issue might be related to the faulty amlogic emmc drivers, If you have Uart cable that would be useful also

 

Regards

 

Sorry but I don'T have Uart cable.

 

This is the output of

blkid

grab

 

k1plus login: root
root@k1plus:~# blkid
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="1dc052af-fc5c-4690-9ce3-00ae3920916b" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="D18D-D209" TYPE="vfat"
root@k1plus:~# grab
Framebuffer failed
Grabbing Video ...
Resizing Video to 127 x -1627645944 ...
Segmentation fault

 

Can you try this:

push this module to the device

https://drive.google...pFVja5jjiIhTwqy

 

then change directory to the same path and exectue:

insmod aml_nftl_dev.ko 

and see the output of blkid if it changes



Re: Howto build unofficial pli for your unsupported receiver #2052 belaid38

  • Member
  • 10 posts

+4
Neutral

Posted 10 August 2018 - 17:45

hi

 

you can add patch fix audio ac3 for amiko alien 5  to wetek play 2 

 

 

They use the same sound chip AUDIO MESON8 DEVICES  AML-M8AUDIO



Re: Howto build unofficial pli for your unsupported receiver #2053 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 10 August 2018 - 17:55

hi

 

you can add patch fix audio ac3 for amiko alien 5  to wetek play 2 

 

 

They use the same sound chip AUDIO MESON8 DEVICES  AML-M8AUDIO

linkdroid doesn't provides sources, everything they changed in the kernel or libamcodec or gstreamer plugins are provided as a binary blobs.

their latest gst-plugins update

https://github.com/o...8ffa8ec78953837

caused the plugins to be blackisted by gstreamer, probably they did something finiky in the plugins.



Re: Howto build unofficial pli for your unsupported receiver #2054 thmls

  • Senior Member
  • 57 posts

+3
Neutral

Posted 10 August 2018 - 18:28

[/quote]
Can you try this:
push this module to the device
https://drive.google...pFVja5jjiIhTwqy[/quote]




on which route should I move the module?

Edited by thmls, 10 August 2018 - 18:29.


Re: Howto build unofficial pli for your unsupported receiver #2055 belaid38

  • Member
  • 10 posts

+4
Neutral

Posted 10 August 2018 - 19:13

 

hi

 

you can add patch fix audio ac3 for amiko alien 5  to wetek play 2 

 

 

They use the same sound chip AUDIO MESON8 DEVICES  AML-M8AUDIO

linkdroid doesn't provides sources, everything they changed in the kernel or libamcodec or gstreamer plugins are provided as a binary blobs.

their latest gst-plugins update

https://github.com/o...8ffa8ec78953837

caused the plugins to be blackisted by gstreamer, probably they did something finiky in the plugins.

 

 

i think amlogic s905  will support gstreamer 1.0 with development baylibre in mainline kernel  future

 
From here we will see a puzzle in full definitions
 
wetek play 2 is supported :)
 


Re: Howto build unofficial pli for your unsupported receiver #2056 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 10 August 2018 - 19:36

[/quote]
Can you try this:
push this module to the device
https://drive.google...pFVja5jjiIhTwqy[/quote]




on which route should I move the module?

any path will be okay, you can just move it to the home directory

/home/root/


Re: Howto build unofficial pli for your unsupported receiver #2057 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 10 August 2018 - 19:46

 

 

hi

 

you can add patch fix audio ac3 for amiko alien 5  to wetek play 2 

 

 

They use the same sound chip AUDIO MESON8 DEVICES  AML-M8AUDIO

linkdroid doesn't provides sources, everything they changed in the kernel or libamcodec or gstreamer plugins are provided as a binary blobs.

their latest gst-plugins update

https://github.com/o...8ffa8ec78953837

caused the plugins to be blackisted by gstreamer, probably they did something finiky in the plugins.

 

 

i think amlogic s905  will support gstreamer 1.0 with development baylibre in mainline kernel  future

 
From here we will see a puzzle in full definitions
 
wetek play 2 is supported :)
 

 

Baylibre work is great but it's far from being done.

The DVB part is still not worked on

see here: http://linux-meson.com/doku.php

Also switching to mainline kernel means we need a new e2procfs module, since all amlogic headers are probably gone in the mainline kernel.



Re: Howto build unofficial pli for your unsupported receiver #2058 starz

  • Senior Member
  • 59 posts

+1
Neutral

Posted 10 August 2018 - 19:54

 

 

Regards

Can you give the output of

blkid

The booting issue might be related to the faulty amlogic emmc drivers, If you have Uart cable that would be useful also

 

Regards

 

Sorry but I don'T have Uart cable.

 

This is the output of

blkid

grab

 

k1plus login: root
root@k1plus:~# blkid
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="1dc052af-fc5c-4690-9ce3-00ae3920916b" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="D18D-D209" TYPE="vfat"
root@k1plus:~# grab
Framebuffer failed
Grabbing Video ...
Resizing Video to 127 x -1627645944 ...
Segmentation fault

 

Can you try this:

push this module to the device

https://drive.google...pFVja5jjiIhTwqy

 

then change directory to the same path and exectue:

insmod aml_nftl_dev.ko 

and see the output of blkid if it changes

Ok,I did it.

after insmod this is the output:

root@k1plus:/lib/modules/3.14.29/kernel/drivers/amlogic/extra# insmod aml_nftl_d
ev.ko
root@k1plus:/lib/modules/3.14.29/kernel/drivers/amlogic/extra# cd
root@k1plus:~# blkid
/dev/data: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/system: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/cache: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="0b3c53d6-8ad8-4af0-a20c-599a98120cae" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="6945-F30C" TYPE="vfat"
root@k1plus:~# 

then restarted and again "no signal" on tv screen.but when I changed hdmi inputs, box booted very well and without any blank screen:)

tried a few times and results are same every time.

-restart the box,

-goes to the "no signal".

-change hdmi inputs on tv remote and it boots well,no any blank screen and waitings. thanks moham96

 

and after restart blkid output;

k1plus login: root
root@k1plus:~# blkid
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="0b3c53d6-8ad8-4af0-a20c-599a98120cae" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="6945-F30C" TYPE="vfat"
root@k1plus:~# 


Re: Howto build unofficial pli for your unsupported receiver #2059 starz

  • Senior Member
  • 59 posts

+1
Neutral

Posted 10 August 2018 - 20:57




Regards

Can you give the output of
blkid
The booting issue might be related to the faulty amlogic emmc drivers, If you have Uart cable that would be useful also

Regards
Sorry but I don'T have Uart cable.

This is the output of
blkid
grab

k1plus login: root
root@k1plus:~# blkid
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="1dc052af-fc5c-4690-9ce3-00ae3920916b" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="D18D-D209" TYPE="vfat"
root@k1plus:~# grab
Framebuffer failed
Grabbing Video ...
Resizing Video to 127 x -1627645944 ...
Segmentation fault
Can you try this:
push this module to the device
https://drive.google...pFVja5jjiIhTwqy

then change directory to the same path and exectue:
insmod aml_nftl_dev.ko
and see the output of blkid if it changes
Ok,I did it.
after insmod this is the output:
root@k1plus:/lib/modules/3.14.29/kernel/drivers/amlogic/extra# insmod aml_nftl_d
ev.ko
root@k1plus:/lib/modules/3.14.29/kernel/drivers/amlogic/extra# cd
root@k1plus:~# blkid
/dev/data: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/system: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/cache: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="0b3c53d6-8ad8-4af0-a20c-599a98120cae" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="6945-F30C" TYPE="vfat"
root@k1plus:~# 
then restarted and again "no signal" on tv screen.but when I changed hdmi inputs, box booted very well and without any blank screen:)
tried a few times and results are same every time.
-restart the box,
-goes to the "no signal".
-change hdmi inputs on tv remote and it boots well,no any blank screen and waitings. thanks moham96

and after restart blkid output;
k1plus login: root
root@k1plus:~# blkid
/dev/mmcblk0p2: LABEL="ROOTFS" UUID="0b3c53d6-8ad8-4af0-a20c-599a98120cae" TYPE="ext4"
/dev/mmcblk0p1: LABEL="BOOT" UUID="6945-F30C" TYPE="vfat"
root@k1plus:~# 

After some more tests and power on-off the device.it started to stay on blank screen.
Can it be a result of using malaysk's custom rom on my box? Or an updated multiboot recovery?

Re: Howto build unofficial pli for your unsupported receiver #2060 engineerkhan15

  • Senior Member
  • 145 posts

+18
Neutral

Posted 11 August 2018 - 05:19

Here is another test image for K1 Pro which I compiled last night:

http://www.mediafire...sdcard.zip/file

 

Tested and found 4 tuners in tuner setup as in ftp21_'s image.

Channels tuned but only on few transponders, then tuner is locked and does not find any channel further until box is rebooted.

Signal level shows on all saved channels as well as on all transponders in satfinder in "Service Searching" menu.

No video or audio on any saved channel (not even on saved radio channels).




4 user(s) are reading this topic

0 members, 4 guests, 0 anonymous users