2740 replies to this topic

[blinkosm]

help me please i need this driver RT73.tar.gz    because the link in the file rt73_1.1.0.5.bb  (http://impex-sat.de/...lan/RT73.tar.gz) not working

[Persian Prince]

help me please i need this driver RT73.tar.gz    because the link in the file rt73_1.1.0.5.bb  (http://impex-sat.de/...lan/RT73.tar.gz) not working

 

http://www.mediafire...T73.tar.gz/file

 

Google your files, fetch errors are not related to us.

[blinkosm]

 

help me please i need this driver RT73.tar.gz    because the link in the file rt73_1.1.0.5.bb  (http://impex-sat.de/...lan/RT73.tar.gz) not working

 

http://www.mediafire...T73.tar.gz/file

 

Google your files, fetch errors are not related to us.

 

 

thanks persian prince i already google a lot files like fuse-2.9.4.tar.gz ..... but rt73.tar.gz i dont find it maybe beacause the driver is too old

[blinkosm]

 dm800 - vision image : the image is too big problem 

[muhamad]

hi persian prince

 

after update pli extras with ./update.sh still same error:

 

 Disk /home/python/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-pli-extras-k2pro.img: 604MB
| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number  Start   End    Size   Type     File system  Flags
|  1      4194kB  113MB  109MB  primary  fat16        boot, lba
|  2      113MB   604MB  491MB  primary  ext4
|
| mkfs.vfat: file /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
| mkfs.fat 4.1 (2017-01-24)
| WARNING: /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_amlogicsdimg.7098:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
| ERROR: Function failed: do_image_amlogicsdimg (log file is located at /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_amlogicsdimg.7098)
ERROR: Task (/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5909 tasks of which 5675 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
 

how to fix this error,can you help me.

 

THANKS

[starz]

hi persian prince

after update pli extras with ./update.sh still same error:

Disk /home/python/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-pli-extras-k2pro.img: 604MB
| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number Start End Size Type File system Flags
| 1 4194kB 113MB 109MB primary fat16 boot, lba
| 2 113MB 604MB 491MB primary ext4
|
| mkfs.vfat: file /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
| mkfs.fat 4.1 (2017-01-24)
| WARNING: /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_amlogicsdimg.7098:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
| ERROR: Function failed: do_image_amlogicsdimg (log file is located at /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_amlogicsdimg.7098)
ERROR: Task (/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5909 tasks of which 5675 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1

how to fix this error,can you help me.

THANKS

Delete your tmp folder and try again please.

[dreamce]

Count MastaG fulan spark expect openpli 6.2 image for sti7111

[muhamad]

 

hi persian prince

after update pli extras with ./update.sh still same error:

Disk /home/python/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-pli-extras-k2pro.img: 604MB
| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number Start End Size Type File system Flags
| 1 4194kB 113MB 109MB primary fat16 boot, lba
| 2 113MB 604MB 491MB primary ext4
|
| mkfs.vfat: file /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
| mkfs.fat 4.1 (2017-01-24)
| WARNING: /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_amlogicsdimg.7098:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
| ERROR: Function failed: do_image_amlogicsdimg (log file is located at /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_amlogicsdimg.7098)
ERROR: Task (/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5909 tasks of which 5675 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1

how to fix this error,can you help me.

THANKS

Delete your tmp folder and try again please.

 

thanks for reply,,ok i try delete folder tmp and update again

[muhamad]

 

 

hi persian prince

after update pli extras with ./update.sh still same error:

Disk /home/python/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-pli-extras-k2pro.img: 604MB
| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number Start End Size Type File system Flags
| 1 4194kB 113MB 109MB primary fat16 boot, lba
| 2 113MB 604MB 491MB primary ext4
|
| mkfs.vfat: file /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
| mkfs.fat 4.1 (2017-01-24)
| WARNING: /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_amlogicsdimg.7098:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
| ERROR: Function failed: do_image_amlogicsdimg (log file is located at /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_amlogicsdimg.7098)
ERROR: Task (/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5909 tasks of which 5675 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1

how to fix this error,can you help me.

THANKS

Delete your tmp folder and try again please.

 

thanks for reply,,ok i try delete folder tmp and update again

 

still same error

[milaebrothers]

New test images for RPi boards (kernel 4.14.66)

 

raspberrypi0: http://www.mediafire...sdcard.zip/file

 

raspberrypi: http://www.mediafire...sdcard.zip/file

 

raspberrypi2: http://www.mediafire...sdcard.zip/file

 

raspberrypi3: http://www.mediafire...sdcard.zip/file

 

Hello, great work!! Can you upload again rasperrypi3 version so I can test it?

 

many thanx

[sauna]

I have started a new one.by the morning should be for k1 plus.

[starz]

 

 

 

....

 

thanks for reply,,ok i try delete folder tmp and update again

 

still same error

 

ok it's about latest changes on gith sources that made by dear Persian Prince.I think it will be fixed soon.

 

 

--first change this line in your local file "sdcard_image-amlogic.bbclass" to this;

SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-sd.img"

--then in your local file "mecool.inc" to this;

IMAGE_FSTYPES ?= "ext4 amlogicsdimg"

............

    rm -f ${DEPLOY_DIR_IMAGE}/*-sd.img; \

I think without this, it crashes with boot.img

 

 

And dear Persian Prince for k1plus,can you check this in file "rtl8189es-aml_1.0.bb"..

workdir source gives LIC_FILES_CHKSUM error with this.

S = "${WORKDIR}/android_hardware_wifi_realtek_drivers_8189es-f971e4bcbfb5a6109fe2e65dab375f5c63712093/rtl8189ES/"

and works like this on me.

S = "${WORKDIR}/android_hardware_wifi_realtek_drivers_8189es-f971e4b/rtl8189ES/"

Thanks

[muhamad]

run openpli enigma2 image k2pro:

boot ok

internet ok

tuner detect and try scan satelite chinasat11 98.0E fta channel(found 45 fta channel)but no video and sound.have error "no data transponder"time out reading pat.

[buc61b]

Please where is the latest image for amiko 7111 and one question...

How do i activate swap on this image openpli 6 i use right now?!

Thnx guys

[Persian Prince]

@muhamad @starz

The problem was "-sd" which I forgot to remove and it's ok now.

You don't need to remove the build or tmp folders just use my cleanup script and build again: https://github.com/P...leanup-build.sh

[starz]

@muhamad @starz

The problem was "-sd" which I forgot to remove and it's ok now.

You don't need to remove the build or tmp folders just use my cleanup script and build again: https://github.com/P...leanup-build.sh

Ok thank a lot:)

[sauna]

I have error.k1plus.

 

http://www.mediafire...fpaxh6/log/file

[rantanplan]

Please where is the latest image for amiko 7111 and one question...

How do i activate swap on this image openpli 6 i use right now?!

Thnx guys

It is currently being adapted to the sh4 image.
On the one hand, it certainly works well.
On the other hand, there are a few problems to log that are puzzling.
There is not (yet) a download for it.
In the previous image, swap intern (zram) is activated.
You do not need an additional swap.

greetings

[Persian Prince]

meta-broadmedia added:

• bre2zet2c
• sf128
• sf138
• sf3038

meta-gb added:

• gb800se
• gb800seplus
• gb800solo
• gb800ue
• gb800ueplus
• gbipbox
• gbquad
• gbquadplus
• gbultrase
• gbultraue
• gbultraueh
• gbx1
• gbx2
• gbx3
• gbx3h

meta-xt added:

• beyonwizu4
• et13000

Edited by Persian Prince, 28 August 2018 - 12:25.

[Persian Prince]

Some gigablue test images

 

gb800solo: http://www.mediafire...lo_usb.zip/file

 

gbipbox: http://www.mediafire...ox_usb.zip/file

 

gbquad: http://www.mediafire...ad_usb.zip/file