Howto build unofficial pli for your unsupported receiver
Re: Howto build unofficial pli for your unsupported receiver #2321
Posted 29 August 2018 - 15:46
Re: Howto build unofficial pli for your unsupported receiver #2322
Posted 29 August 2018 - 16:15
build for k2pro success:transfer img into sd card
test run on k2pro receiver
boot ok
remote ok
internet ok
tuner detect(scan satellite chinasat11 98.0E found 45 channel FTA)but no video and audio
error:no data transponder"time out reading pat"
how to fix this error,,anybody can help me?
Re: Howto build unofficial pli for your unsupported receiver #2323
Re: Howto build unofficial pli for your unsupported receiver #2324
Posted 29 August 2018 - 19:49
Hi, I looked into the 4.9 code... So it's mainly for the latest amlogic cpus so it dropped support for gxb line. Media drivers nearly the same as 3.14 kernel but restructured.
Something wrong with the dvb drivers or not compatible with dvbmediasink at mecool line. This is why there is no pictures and gst-launch can't play video files...
vsftpd has a bug: /etc/vsftpd.conf is not owned by root so config file not read on startup.
best regards, gcsuri
Re: Howto build unofficial pli for your unsupported receiver #2325
Posted 29 August 2018 - 20:55
Hi,
if we use alien5 libs we may need to use this patch also: https://github.com/o...46cf1cf40ed3c76
best regards, gcsuri
Re: Howto build unofficial pli for your unsupported receiver #2326
Re: Howto build unofficial pli for your unsupported receiver #2327
Posted 30 August 2018 - 02:43
I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras
Don't ask about your brand/model as it takes time to compile and upload
Edited by Persian Prince, 30 August 2018 - 02:47.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #2328
Posted 30 August 2018 - 03:07
I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras
Don't ask about your brand/model as it takes time to compile and upload
And if you couldn't see your box picture in Open WebIF or there was a problem with rc don't complain as there is not much contributions here: https://github.com/P...extra_rc_models
I will update all brands/models later for https://github.com/P...extra_rc_models as it seems nobody cares ...
Edited by Persian Prince, 30 August 2018 - 03:07.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #2329
Posted 30 August 2018 - 10:31
@Beeker thnk's a lot men
i will try this night im not at home now.
thank you
You can expect more problems.
For Python2-native.
pli-extras/recipes-devtools/python/python-native_2.7.13.bbappend
change
SRC_URI += "file://fix-gc-alignment.patch;apply=no"to:
SRC_URI += "file://fix-gc-alignment.patch;apply=yes"Also you need to update elfutils ( to 0.173)
Delete the elfutils directory in openpli-oe-core/meta-openpli/recipes-devtools/.
Extract the elfutils.zip file and copy the elfutils directory to openpli-oe-core/meta-openpli/recipes-devtools/
thnk's bro , problem with upx fixed , and yes i get problem with elfutils, i don't see your post last night ,im with gcc 8.2.0 , thnk's for help, i ill try again,
u are awesome !
Re: Howto build unofficial pli for your unsupported receiver #2330
Posted 30 August 2018 - 13:20
@Persian Prince
I installed the Extra-Image on my Gigablue 800solo. I dont have tested Antenna or CAM related stuff,
because I use the 800solo only as Network-Client for my Ultimo4k. In my enviroment the Image works very good.
Nice to have a new good lightweight image for this old STB.
Thanx a lot for your work!
Re: Howto build unofficial pli for your unsupported receiver #2331
Posted 30 August 2018 - 15:28
August 30: Test feed updated for: dm7020hd / dm7020hdv2 / dm900 / dm920
If any of them needs a fresh image, let me know. I think that online update should be sufficient.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Re: Howto build unofficial pli for your unsupported receiver #2332
Posted 30 August 2018 - 16:37
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #2333
Re: Howto build unofficial pli for your unsupported receiver #2334
Posted 30 August 2018 - 23:17
Hi, I looked into the 4.9 code... So it's mainly for the latest amlogic cpus so it dropped support for gxb line. Media drivers nearly the same as 3.14 kernel but restructured.
Something wrong with the dvb drivers or not compatible with dvbmediasink at mecool line. This is why there is no pictures and gst-launch can't play video files...
vsftpd has a bug: /etc/vsftpd.conf is not owned by root so config file not read on startup.
best regards, gcsuri
Yes, I noticed the dropped support as well.
the dvb drivers right now has an issue where the demuxer is stuck and doesn't reset after tuning, I'm not sure about this but I think tvheadend uses a differ approach, instead of routing the ts to the demuxer it uses libffmpeg to decode the streams and since ffmpeg is already tested by amlogic it works without a problem.
Re: Howto build unofficial pli for your unsupported receiver #2335
Posted 30 August 2018 - 23:18
Hi,
if we use alien5 libs we may need to use this patch also: https://github.com/o...46cf1cf40ed3c76
best regards, gcsuri
AFAIK servicemp3 is only used for playing media files and not dvb stream, already have bunch of alien5 dvb patches :
https://github.com/P...5-enigma2.patch
Re: Howto build unofficial pli for your unsupported receiver #2336
Posted 30 August 2018 - 23:24
I think the best course of action right now is to wait for mainline Linux support, once Maxime finishes his work on the video decoder, the next thing is probably DVB, this will allow us to use the default demuxer device driver with meson platform code, so we will have no issues hopefully.
unfortunately, the merge window for Linux 4.19 closed without merging the video decoder patches and the subsystem guys don't seem to be very enthusiastic about the patches either so this might take longer than expected.
Regards
Re: Howto build unofficial pli for your unsupported receiver #2337
Re: Howto build unofficial pli for your unsupported receiver #2338
Posted 31 August 2018 - 03:44
New fresh images are here: https://m.mediafire....q4d9/pli-extras
Thanks very much Master Persian Prince
Re: Howto build unofficial pli for your unsupported receiver #2339
Posted 31 August 2018 - 09:06
Modify file “Makefile” in folder “hardware\aml-4.9\amlogic\media_modules\drivers\stream_input”, and add the path
of demodulation driver. the demodulation driver is porting by yourself.
Look pdf
http://openlinux.aml...s_V20170814.pdf
Re: Howto build unofficial pli for your unsupported receiver #2340
Posted 31 August 2018 - 11:15
For linux 4.9 add dvb
Modify file “Makefile” in folder “hardware\aml-4.9\amlogic\media_modules\drivers\stream_input”, and add the path
of demodulation driver. the demodulation driver is porting by yourself.
Look pdf
http://openlinux.aml...s_V20170814.pdf
Sadly, I don't have an S905D box to work on, my box is S905 and that buildroot is intended for S905D
12 user(s) are reading this topic
0 members, 12 guests, 0 anonymous users