Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #2341 ycf83

  • Senior Member
  • 53 posts

+2
Neutral

Posted 31 August 2018 - 11:37

hi i try to build openpli dm500hd i get error with upx

 

I just tested dm500hd build and it was ok, I'm using Ubuntu 18.04.1 LTS what about you?

 

 

 

 

 

I don't use ubuntu any more ,  i start with ubuntu, since i break my system with upgrade from 12.04 to 14.04 , 

 

and ubuntu it's always out of date.

 

 

now im with linux  rolling release, gcc 8.2.0 .

 

 

 

@Beeker thnk's a lot men

 

i will try this night im not at home now.

 

thank you

 

You can expect more problems.

 

For Python2-native.

pli-extras/recipes-devtools/python/python-native_2.7.13.bbappend

 

change

SRC_URI += "file://fix-gc-alignment.patch;apply=no"

to:

SRC_URI += "file://fix-gc-alignment.patch;apply=yes"

Also you need to update elfutils ( to 0.173)

 

 

Delete the elfutils directory in openpli-oe-core/meta-openpli/recipes-devtools/.

 

Extract the elfutils.zip file  and copy the elfutils directory to openpli-oe-core/meta-openpli/recipes-devtools/

 

 

 

big thnk's to Beeker,

 

  thnk's for patch gcc 8 ,

 

i build a successful openpli with gcc 8.2.0    "you saved my life" .


Edited by ycf83, 31 August 2018 - 11:37.


Re: Howto build unofficial pli for your unsupported receiver #2342 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 31 August 2018 - 12:37

 

hi i try to build openpli dm500hd i get error with upx

 

I just tested dm500hd build and it was ok, I'm using Ubuntu 18.04.1 LTS what about you?

 

 

I don't use ubuntu any more ,  i start with ubuntu, since i break my system with upgrade from 12.04 to 14.04 , 

 

and ubuntu it's always out of date.

 

 

now im with linux  rolling release, gcc 8.2.0 .

 

 

You could download a test image from https://www.mediafir...q4d9/pli-extras for your STB ;)

 

Also we mentioned here to use ubuntu 18.04: https://github.com/P...-1804-lts-setup so you could have saved yourself a lot of time ;)


Edited by Persian Prince, 31 August 2018 - 12:38.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2343 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 31 August 2018 - 13:47

My main machine runs Archlinux which has alot of problems building PLi since it always has the latest packages.

Don't bother fixing build issues, just use the recommended disto(ubuntu 18.04 in this case).

If your main machine runs linux that is not compatible then you shouldn't use virtualization, instead use something like chroot/debootstrap or lxc/lxd(linux container) to have the full machine power available to bitbake, that's what I do anyway.

 

Regards



Re: Howto build unofficial pli for your unsupported receiver #2344 ycf83

  • Senior Member
  • 53 posts

+2
Neutral

Posted 31 August 2018 - 13:56

yes i know many forum propose image for dm 500hd , but i don't find one with feed, i build with my machine for this reason.

 

for now it's all okay for me , i don't  use ubuntu.


Edited by ycf83, 31 August 2018 - 14:00.


Re: Howto build unofficial pli for your unsupported receiver #2345 HFX

  • Senior Member
  • 323 posts

+8
Neutral

Posted 31 August 2018 - 16:49

Hello persian prince,

 

The image for the gigablue hd quad plus does not work, it is not possible to flash it via the USB, the receiver does not respond to the USB stick



Re: Howto build unofficial pli for your unsupported receiver #2346 belaid38

  • Member
  • 10 posts

+4
Neutral

Posted 31 August 2018 - 19:10

I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras

 

Don't ask about your brand/model as it takes time to compile and upload ;)

hi @persian prince thanx

 

i tested in wetek play2 is work very nice good  but  remote botton yellow change audio and timeshift not works



Re: Howto build unofficial pli for your unsupported receiver #2347 blinkosm

  • Senior Member
  • 144 posts

+1
Neutral

Posted 31 August 2018 - 22:17

hi persian prince i wonder if it's possible to build an image vision for dm800   ????  and if vision image uses python 3.xx ???



Re: Howto build unofficial pli for your unsupported receiver #2348 zildan

  • Member
  • 13 posts

+1
Neutral

Posted 1 September 2018 - 16:00

With latest test image (31.08)

 

- K3 pro old problems

 = 1500000) is a meson_uart
[    2.548674@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change                                  0 to 115200
[    2.551395@0] console [ttyS0] enabled
[    2.551395@0] console [ttyS0] enabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.568044@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001f44c0
[    2.574420@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud                                  = 1500000) is a meson_uart
[    2.584699@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy:                                  d0078000, ctrl: 0
[    2.692821@7] dwc_otg: Core Release: 3.10a
[    2.692890@3] dwc_otg: Setting default values for core params
[    2.697001@3] dwc_otg: curmode: 0, host_only: 0
[    2.712933@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.712933@3]
[    2.730226@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.730226@3]
[    2.746255@3] dwc_otg: Using Buffer DMA mode
[    2.746272@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.750144@3] dwc_otg: Working on port type = SLAVE
[    2.754984@3] dwc_otg: Dedicated Tx FIFOs mode


- A5 Boot ok, wizard Ok, freeze at scan!

Edited by zildan, 1 September 2018 - 16:01.


Re: Howto build unofficial pli for your unsupported receiver #2349 Guardian

  • Senior Member
  • 104 posts

+2
Neutral

Posted 1 September 2018 - 18:08

I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras

Don't ask about your brand/model as it takes time to compile and upload ;)

Azbox me webif img NO BOOT

Verstuurd vanaf mijn SM-G390F met Tapatalk

Re: Howto build unofficial pli for your unsupported receiver #2350 johnny64

  • Member
  • 5 posts

0
Neutral

Posted 2 September 2018 - 05:46

Dinobot4KSE no boot
http://www.mediafire...se_mmc.zip/file

Re: Howto build unofficial pli for your unsupported receiver #2351 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 2 September 2018 - 07:00

@Persian Prince
I installed the Extra-Image on my Gigablue 800solo. I dont have tested Antenna or CAM related stuff,
because I use the 800solo only as Network-Client for my Ultimo4k. In my enviroment the Image works very good.
Nice to have a new good lightweight image for this old STB.
Thanx a lot for your work!

 

Glad to hear :)

 

 

I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras

 

Don't ask about your brand/model as it takes time to compile and upload ;)

hi @persian prince thanx

 

i tested in wetek play2 is work very nice good  but  remote botton yellow change audio and timeshift not works

 

 

They never work or just in some cases?

 

hi persian prince i wonder if it's possible to build an image vision for dm800   ????  and if vision image uses python 3.xx ???

 

No vision for smallflash STBs, it's a waste of time.

 

There is no python 3.x support in enigma2 and I think it won't be like never, why do you need python 3.x anyway?


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2352 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 2 September 2018 - 07:03

 

With latest test image (31.08)

 

- K3 pro old problems

 = 1500000) is a meson_uart
[    2.548674@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change                                  0 to 115200
[    2.551395@0] console [ttyS0] enabled
[    2.551395@0] console [ttyS0] enabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.568044@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001f44c0
[    2.574420@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud                                  = 1500000) is a meson_uart
[    2.584699@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy:                                  d0078000, ctrl: 0
[    2.692821@7] dwc_otg: Core Release: 3.10a
[    2.692890@3] dwc_otg: Setting default values for core params
[    2.697001@3] dwc_otg: curmode: 0, host_only: 0
[    2.712933@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.712933@3]
[    2.730226@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.730226@3]
[    2.746255@3] dwc_otg: Using Buffer DMA mode
[    2.746272@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.750144@3] dwc_otg: Working on port type = SLAVE
[    2.754984@3] dwc_otg: Dedicated Tx FIFOs mode


- A5 Boot ok, wizard Ok, freeze at scan!

 

There was no new development in meta-amlogic and I just compiled test images for anybody who's interested.

 

 

I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras

Don't ask about your brand/model as it takes time to compile and upload ;)

Azbox me webif img NO BOOT

Verstuurd vanaf mijn SM-G390F met Tapatalk

 

 

Any logs? without logs it's impossible to investigate and sometimes even with logs we can't do anything as we don't have the STB itself.

 

 

Any logs? without logs it's impossible to investigate and sometimes even with logs we can't do anything as we don't have the STB itself.


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2353 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 2 September 2018 - 07:04

Hello persian prince,

 

The image for the gigablue hd quad plus does not work, it is not possible to flash it via the USB, the receiver does not respond to the USB stick

 

Hi there,

 

I have no idea, DrData reported it works on gb800solo: https://forums.openp...ndpost&p=926655


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2354 blinkosm

  • Senior Member
  • 144 posts

+1
Neutral

Posted 2 September 2018 - 07:07

I'm compiling and uploading test images for all brands/models here: http://www.mediafire...q4d9/pli-extras

Don't ask about your brand/model as it takes time to compile and upload ;)


Thanks i appreciate

Re: Howto build unofficial pli for your unsupported receiver #2355 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 2 September 2018 - 13:24

Now both topics are merged (dreambox into this thread) as we're talking about pli-extras altogether :)


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2356 muhamad

  • Member
  • 16 posts

0
Neutral

Posted 2 September 2018 - 16:13

 

With latest test image (31.08)

 

- K3 pro old problems

 = 1500000) is a meson_uart
[    2.548674@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change                                  0 to 115200
[    2.551395@0] console [ttyS0] enabled
[    2.551395@0] console [ttyS0] enabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.568044@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001f44c0
[    2.574420@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud                                  = 1500000) is a meson_uart
[    2.584699@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy:                                  d0078000, ctrl: 0
[    2.692821@7] dwc_otg: Core Release: 3.10a
[    2.692890@3] dwc_otg: Setting default values for core params
[    2.697001@3] dwc_otg: curmode: 0, host_only: 0
[    2.712933@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.712933@3]
[    2.730226@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.730226@3]
[    2.746255@3] dwc_otg: Using Buffer DMA mode
[    2.746272@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.750144@3] dwc_otg: Working on port type = SLAVE
[    2.754984@3] dwc_otg: Dedicated Tx FIFOs mode


- A5 Boot ok, wizard Ok, freeze at scan!

i build for k2 pro boot ok but dvb tuner have problem after scan satellite..error no data transponder time out reading pat.and still hope for meta amlogic update



Re: Howto build unofficial pli for your unsupported receiver #2357 dray1

  • Member
  • 20 posts

0
Neutral

Posted 3 September 2018 - 06:11

One question , if i flash my receiver with one of this unofficial image will still my receiver get the normal updates from original pli 6.2 images ? ( from software update option )



Re: Howto build unofficial pli for your unsupported receiver #2358 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 3 September 2018 - 06:20

 

 

With latest test image (31.08)

 

- K3 pro old problems

 = 1500000) is a meson_uart
[    2.548674@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change                                  0 to 115200
[    2.551395@0] console [ttyS0] enabled
[    2.551395@0] console [ttyS0] enabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.558567@0] bootconsole [earlycon0] disabled
[    2.568044@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001f44c0
[    2.574420@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud                                  = 1500000) is a meson_uart
[    2.584699@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy:                                  d0078000, ctrl: 0
[    2.692821@7] dwc_otg: Core Release: 3.10a
[    2.692890@3] dwc_otg: Setting default values for core params
[    2.697001@3] dwc_otg: curmode: 0, host_only: 0
[    2.712933@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.712933@3]
[    2.730226@3] WARN::dwc_otg_core_reset:5150: dwc_otg_core_reset() HANG! Soft                                  Reset GRSTCTL=80000001
[    2.730226@3]
[    2.746255@3] dwc_otg: Using Buffer DMA mode
[    2.746272@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.750144@3] dwc_otg: Working on port type = SLAVE
[    2.754984@3] dwc_otg: Dedicated Tx FIFOs mode


- A5 Boot ok, wizard Ok, freeze at scan!

i build for k2 pro boot ok but dvb tuner have problem after scan satellite..error no data transponder time out reading pat.and still hope for meta amlogic update

 

 

As I said there was no recent development in meta-amlogic so the old problems are still there ...

 

One question , if i flash my receiver with one of this unofficial image will still my receiver get the normal updates from original pli 6.2 images ? ( from software update option )

 

Absolutely not, these images are just for test so no online feeds and no relation to PLi itself, also as they're using develop branch of enigma2 and OE you can say 6.x not 6.2.


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2359 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 3 September 2018 - 06:22

I just finished uploading 190 images (about 12.5 GB) on http://www.mediafire...q4d9/pli-extras

 

You can even find spark (sh4) there ;)

 

Only "cube" is missing which I can't fix the build ...


Edited by Persian Prince, 3 September 2018 - 06:22.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2360 gerard0610

  • Senior Member
  • 943 posts

+41
Good

Posted 3 September 2018 - 07:58

@ Persian Prince.

You message: "I just finished uploading 190 images (about 12.5 GB) on http://www.mediafire...q4d9/pli-extras".

 

Thank you for this and all you work.




22 user(s) are reading this topic

0 members, 22 guests, 0 anonymous users