Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #2361 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 3 September 2018 - 12:06

Test image Cube 256MB.

 

http://www.mediafire...-256MB.zip/file


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #2362 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 3 September 2018 - 12:37

I just uploaded a new shell script: https://github.com/P...evelop/image.sh which makes my life easier :)

 

"image.sh" is not just for 1 machine, it will compile a meta for you, for example if you choose Dreambox it will compile:

  • dm500hd
  • dm500hdv2
  • dm520
  • dm7020hd
  • dm7020hdv2
  • dm7080
  • dm800
  • dm8000
  • dm800se
  • dm800sev2
  • dm820
  • dm900
  • dm920

but you can edit it yourself if you just want 1 model ;)

 

It can manage PLi, Vision and Feed so good luck.


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2363 jojoz

  • Senior Member
  • 25 posts

0
Neutral

Posted 3 September 2018 - 17:31

Hello! I just flashed a dreambox dm520 homebuild image which I built with my Debian Strech OS with no errors. However an error message appeared during flash process which says boot image is too big and then when I booted the box it shows only openpli homebuild image screen and nothing else,no remote control buttons function. I also flashed pre-built tar.xz file you uploaded on MediaFire for my box and again the same problem. Why this? What's wrong?
Thanks in advance!

Re: Howto build unofficial pli for your unsupported receiver #2364 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 3 September 2018 - 17:54

Can you telnet to box and do:

init 4
enigma2

Search for error and post here at forum.


Edited by Beeker, 3 September 2018 - 17:54.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #2365 jojoz

  • Senior Member
  • 25 posts

0
Neutral

Posted 4 September 2018 - 07:37

O.k! i did as you said and then it shows that: 
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
Then i can see the wizard on tv screen and set up receiver with remote control. But after having finished the process and tried to reboot from menu then it says dreambox dm520 is rebooting and freezes. However i can reboot with telnet and then again use remote control. I should say that on all other images i flashed when the box is re/booting the red light of power button on receiver turns to blue and then i can use remote control. This does not happen with this image!


Re: Howto build unofficial pli for your unsupported receiver #2366 jojoz

  • Senior Member
  • 25 posts

0
Neutral

Posted 4 September 2018 - 07:48

 

O.k! i did as you said and then it shows that: 
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
Then i can see the wizard on tv screen and set up receiver with remote control. But after having finished the process and tried to reboot from menu then it says dreambox dm520 is rebooting and freezes. However i can reboot with telnet and then again repeat what you said (with telnet) and use remote control. I should say that on all other images i flashed after the box is re/booted the red light of power button on receiver turns to blue and then i can use remote control. This does not happen with this image!

 



Re: Howto build unofficial pli for your unsupported receiver #2367 ycf83

  • Senior Member
  • 53 posts

+2
Neutral

Posted 4 September 2018 - 11:04

hi, and thnk's for your hard work

 

my remote control for my dreambox 500hd , not work properly,   i mean remote control doesnt respond to commands right away. I need to press same key twice for example., i use remote control of my tv "HDMI CEC" and it's work normal .



Re: Howto build unofficial pli for your unsupported receiver #2368 milaebrothers

  • Member
  • 17 posts

+4
Neutral

Posted 4 September 2018 - 12:35

I just finished uploading 190 images (about 12.5 GB) on http://www.mediafire...q4d9/pli-extras

 

You can even find spark (sh4) there ;)

 

Only "cube" is missing which I can't fix the build ...

 

Great work, yesterday I tried raspberry pi 3 image, the system booted and discovered DVB-T2 tuner on /dev/dvb dir, but, as I read on meta-pli repository, is needed e2procfs to create nim_socket to show tuner also in enigma2.

The porting, also partial, from amlogic-e2-procfs it's difficult due the different kernel version?



Re: Howto build unofficial pli for your unsupported receiver #2369 satforindo

  • Senior Member
  • 62 posts

0
Neutral

Posted 4 September 2018 - 12:56

I just uploaded a new shell script: https://github.com/P...evelop/image.sh which makes my life easier :)

 

"image.sh" is not just for 1 machine, it will compile a meta for you, for example if you choose Dreambox it will compile:

  • dm500hd
  • dm500hdv2
  • dm520
  • dm7020hd
  • dm7020hdv2
  • dm7080
  • dm800
  • dm8000
  • dm800se
  • dm800sev2
  • dm820
  • dm900
  • dm920

but you can edit it yourself if you just want 1 model ;)

 

It can manage PLi, Vision and Feed so good luck.

 

Persian Prince, do yo have a compiled image for Dinobot4K?

 

I try to compile it myself, but it ends with this error:

Building image for dinobot4k
NOTE: Your conf/bblayers.conf has been automatically updated.
NOTE: Your conf/bblayers.conf has been automatically updated.
Parsing recipes: 100% |##################################################################################################################################| Time: 0:06:40
Parsing of 3140 .bb files complete (0 cached, 3140 parsed). 3952 targets, 784 skipped, 0 masked, 0 errors.
ERROR: No recipes available for:
  /home/budiarno/Source/Enigma2/Maxx-OE/openpli/builds/PLi-Extras/openpli-oe-core/meta-xsarius.pli5/recipes-graphics/gtk/gtk+_2.24.30.bbappend
  /home/budiarno/Source/Enigma2/Maxx-OE/openpli/builds/PLi-Extras/openpli-oe-core/meta-qviart/recipes-graphics/gtk/gtk+_2.24.30.bbappend


Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1

Edited by Budiarno, 4 September 2018 - 12:57.


Re: Howto build unofficial pli for your unsupported receiver #2370 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 4 September 2018 - 13:31

It's seems you openpli-oe-core is out of date.

 

Update with

pli-extras/update.sh

Check for errors, like aborting update due to local changes.


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #2371 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 4 September 2018 - 13:31

 

I just finished uploading 190 images (about 12.5 GB) on http://www.mediafire...q4d9/pli-extras

 

You can even find spark (sh4) there ;)

 

Only "cube" is missing which I can't fix the build ...

 

Great work, yesterday I tried raspberry pi 3 image, the system booted and discovered DVB-T2 tuner on /dev/dvb dir, but, as I read on meta-pli repository, is needed e2procfs to create nim_socket to show tuner also in enigma2.

The porting, also partial, from amlogic-e2-procfs it's difficult due the different kernel version?

 

 

I have no idea, I just made it possible to have a nice meta for compiling ;)

 

 

I just uploaded a new shell script: https://github.com/P...evelop/image.sh which makes my life easier :)

 

"image.sh" is not just for 1 machine, it will compile a meta for you, for example if you choose Dreambox it will compile:

  • dm500hd
  • dm500hdv2
  • dm520
  • dm7020hd
  • dm7020hdv2
  • dm7080
  • dm800
  • dm8000
  • dm800se
  • dm800sev2
  • dm820
  • dm900
  • dm920

but you can edit it yourself if you just want 1 model ;)

 

It can manage PLi, Vision and Feed so good luck.

 

Persian Prince, do yo have a compiled image for Dinobot4K?

 

I try to compile it myself, but it ends with this error:

Building image for dinobot4k
NOTE: Your conf/bblayers.conf has been automatically updated.
NOTE: Your conf/bblayers.conf has been automatically updated.
Parsing recipes: 100% |##################################################################################################################################| Time: 0:06:40
Parsing of 3140 .bb files complete (0 cached, 3140 parsed). 3952 targets, 784 skipped, 0 masked, 0 errors.
ERROR: No recipes available for:
  /home/budiarno/Source/Enigma2/Maxx-OE/openpli/builds/PLi-Extras/openpli-oe-core/meta-xsarius.pli5/recipes-graphics/gtk/gtk+_2.24.30.bbappend
  /home/budiarno/Source/Enigma2/Maxx-OE/openpli/builds/PLi-Extras/openpli-oe-core/meta-qviart/recipes-graphics/gtk/gtk+_2.24.30.bbappend


Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1

 

 

There are 190 images (about 12.5 GB) on: http://www.mediafire...q4d9/pli-extras ;)

 

You can remove the lines you don't need to fix those problems: https://github.com/O...akefile#L54~L71


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2372 satforindo

  • Senior Member
  • 62 posts

0
Neutral

Posted 4 September 2018 - 13:33

Thank you, I'll try the ready built image from your mediafire link.

 

I'll try to compile it again later.



Re: Howto build unofficial pli for your unsupported receiver #2373 interprises

  • Senior Member
  • 25 posts

+4
Neutral

Posted 4 September 2018 - 15:11

 

 

I just finished uploading 190 images (about 12.5 GB) on http://www.mediafire...q4d9/pli-extras

 

You can even find spark (sh4) there ;)

 

Only "cube" is missing which I can't fix the build ...

 

Great work, yesterday I tried raspberry pi 3 image, the system booted and discovered DVB-T2 tuner on /dev/dvb dir, but, as I read on meta-pli repository, is needed e2procfs to create nim_socket to show tuner also in enigma2.

The porting, also partial, from amlogic-e2-procfs it's difficult due the different kernel version?

 

 

I have no idea, I just made it possible to have a nice meta for compiling ;)

 

 

I just uploaded a new shell script: https://github.com/P...evelop/image.sh which makes my life easier :)

 

"image.sh" is not just for 1 machine, it will compile a meta for you, for example if you choose Dreambox it will compile:

  • dm500hd
  • dm500hdv2
  • dm520
  • dm7020hd
  • dm7020hdv2
  • dm7080
  • dm800
  • dm8000
  • dm800se
  • dm800sev2
  • dm820
  • dm900
  • dm920

but you can edit it yourself if you just want 1 model ;)

 

It can manage PLi, Vision and Feed so good luck.

 

Persian Prince, do yo have a compiled image for Dinobot4K?

 

I try to compile it myself, but it ends with this error:

Building image for dinobot4k
NOTE: Your conf/bblayers.conf has been automatically updated.
NOTE: Your conf/bblayers.conf has been automatically updated.
Parsing recipes: 100% |##################################################################################################################################| Time: 0:06:40
Parsing of 3140 .bb files complete (0 cached, 3140 parsed). 3952 targets, 784 skipped, 0 masked, 0 errors.
ERROR: No recipes available for:
  /home/budiarno/Source/Enigma2/Maxx-OE/openpli/builds/PLi-Extras/openpli-oe-core/meta-xsarius.pli5/recipes-graphics/gtk/gtk+_2.24.30.bbappend
  /home/budiarno/Source/Enigma2/Maxx-OE/openpli/builds/PLi-Extras/openpli-oe-core/meta-qviart/recipes-graphics/gtk/gtk+_2.24.30.bbappend


Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1

 

 

There are 190 images (about 12.5 GB) on: http://www.mediafire...q4d9/pli-extras ;)

 

You can remove the lines you don't need to fix those problems: https://github.com/O...akefile#L54~L71

 

thank you so much



Re: Howto build unofficial pli for your unsupported receiver #2374 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 4 September 2018 - 16:50

Hi Persian Prince,
Thanks for the #2362
I tested your script and it works nicely. I'm going to try for beyonwizu4:
./image.sh
META = "XT"
MACHINE=beyonwizu4
I do not know how it ends but at the moment builds.  :)

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #2375 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 4 September 2018 - 22:25

It ended with success.  :)

Attached Files


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #2376 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 5 September 2018 - 01:09

Feed also OK with your script. (For both machines- beyonwizu4 & et13000)

Attached Files


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #2377 atef

  • Senior Member
  • 92 posts

+1
Neutral

Posted 5 September 2018 - 02:05

Problem building a new spark
Can not add RaedQuickSignal

Taapat based on OpenPLi Enigma2 crash log
 
crashdate=Wed Sep  5 02:41:43 2018
compiledate=Sep  4 2018
skin=CinoDreamOsatPLi-Gri/skin.xml
sourcedate=2018-09-04
branch=develop
rev=52079b0
component=Enigma2
 
stbmodel=spark
kernelcmdline=console=ttyAS0,115200 root=/dev/mtdblock6 rw rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 stmmaceth=ethaddr:24:00:21:00:35:FB
nimsockets=NIM Socket 0:
imageversion=openpli pli-extras \n \l
imageissue=openpli pli-extras %h
 
 
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Navigation.py", line 69, in dispatchEvent
  File "/usr/lib/enigma2/python/Components/PerServiceDisplay.py", line 17, in event
  File "/usr/lib/enigma2/python/Components/Sources/CurrentService.py", line 26, in serviceEvent
  File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
  File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
  File "/usr/lib/enigma2/python/Components/Converter/QuickServName2.py", line 341, in changed
  File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
  File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
  File "/usr/lib/enigma2/python/Components/Renderer/PiconUni.py", line 81, in changed
    pngname = self.findPicon(sname)
  File "/usr/lib/enigma2/python/Components/Renderer/PiconUni.py", line 116, in findPicon
    pngname = (path % dirName) + serviceName + '.png'
TypeError: not all arguments converted during string formatting
 
 
dmesg
 
<4>VFD/AOTOM: unknown IOCTL 0x1015
<4>stmhdmiio_get_cec_address - 88cf0000
<4>stv090x_init: AGCRF1CFG = 0x10
<4>stv090x_init: AGCRF2CFG = 0x13
<4>msg.addr = 96
<4>config->addr = 96
<4>ix7306_write: write error, err=-121
<4>nim_vz7306_control: I2C write error init_data1
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<4>aotom_write_rtc_offset 4 - aotom_write_rtc_offset -> 7200
<4> offset: 7200
<4>stmhdmiio_set_audio_source - 88cf0000
<4>power_standbyled_write(2, ononstmhdmiio_set_edid_handling - 88cf0000
<4>stmhdmiio_set_audio_source - 88cf0000
<4>stmhdmiio_get_cec_address - 88cf0000

Edited by atef, 5 September 2018 - 02:08.

VU PLUS ULTIMO:Dreambox 820 hd:Spark 7111


Re: Howto build unofficial pli for your unsupported receiver #2378 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 5 September 2018 - 08:14

 

Hi Persian Prince,
Thanks for the #2362
I tested your script and it works nicely. I'm going to try for beyonwizu4:
./image.sh
META = "XT"
MACHINE=beyonwizu4
I do not know how it ends but at the moment builds.  :)

 

 

 

It ended with success.  :)

 

 

Feed also OK with your script. (For both machines- beyonwizu4 & et13000)

 

Glad to hear it  :)

 

I think it's easier than before right? ;)


Edited by Persian Prince, 5 September 2018 - 08:14.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2379 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 5 September 2018 - 08:16

 

Problem building a new spark
Can not add RaedQuickSignal

Taapat based on OpenPLi Enigma2 crash log
 
crashdate=Wed Sep  5 02:41:43 2018
compiledate=Sep  4 2018
skin=CinoDreamOsatPLi-Gri/skin.xml
sourcedate=2018-09-04
branch=develop
rev=52079b0
component=Enigma2
 
stbmodel=spark
kernelcmdline=console=ttyAS0,115200 root=/dev/mtdblock6 rw rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 stmmaceth=ethaddr:24:00:21:00:35:FB
nimsockets=NIM Socket 0:
imageversion=openpli pli-extras \n \l
imageissue=openpli pli-extras %h
 
 
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Navigation.py", line 69, in dispatchEvent
  File "/usr/lib/enigma2/python/Components/PerServiceDisplay.py", line 17, in event
  File "/usr/lib/enigma2/python/Components/Sources/CurrentService.py", line 26, in serviceEvent
  File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
  File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
  File "/usr/lib/enigma2/python/Components/Converter/QuickServName2.py", line 341, in changed
  File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
  File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
  File "/usr/lib/enigma2/python/Components/Renderer/PiconUni.py", line 81, in changed
    pngname = self.findPicon(sname)
  File "/usr/lib/enigma2/python/Components/Renderer/PiconUni.py", line 116, in findPicon
    pngname = (path % dirName) + serviceName + '.png'
TypeError: not all arguments converted during string formatting
 
 
dmesg
 
<4>VFD/AOTOM: unknown IOCTL 0x1015
<4>stmhdmiio_get_cec_address - 88cf0000
<4>stv090x_init: AGCRF1CFG = 0x10
<4>stv090x_init: AGCRF2CFG = 0x13
<4>msg.addr = 96
<4>config->addr = 96
<4>ix7306_write: write error, err=-121
<4>nim_vz7306_control: I2C write error init_data1
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<4>aotom_write_rtc_offset 4 - aotom_write_rtc_offset -> 7200
<4> offset: 7200
<4>stmhdmiio_set_audio_source - 88cf0000
<4>power_standbyled_write(2, ononstmhdmiio_set_edid_handling - 88cf0000
<4>stmhdmiio_set_audio_source - 88cf0000
<4>stmhdmiio_get_cec_address - 88cf0000

 

 

I think it's not related to us, anything extra you add is your responsibility not ours.


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2380 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 5 September 2018 - 08:17

Yes, especially for those who build several machines.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz



45 user(s) are reading this topic

0 members, 44 guests, 0 anonymous users


    Bing (1)