help me please i need this driver RT73.tar.gz because the link in the file rt73_1.1.0.5.bb (http://impex-sat.de/...lan/RT73.tar.gz) not working
Howto build unofficial pli for your unsupported receiver
Re: Howto build unofficial pli for your unsupported receiver #2281
Re: Howto build unofficial pli for your unsupported receiver #2282
Posted 26 August 2018 - 11:21
help me please i need this driver RT73.tar.gz because the link in the file rt73_1.1.0.5.bb (http://impex-sat.de/...lan/RT73.tar.gz) not working
http://www.mediafire...T73.tar.gz/file
Google your files, fetch errors are not related to us.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #2283
Posted 26 August 2018 - 12:21
help me please i need this driver RT73.tar.gz because the link in the file rt73_1.1.0.5.bb (http://impex-sat.de/...lan/RT73.tar.gz) not working
http://www.mediafire...T73.tar.gz/file
Google your files, fetch errors are not related to us.
thanks persian prince i already google a lot files like fuse-2.9.4.tar.gz ..... but rt73.tar.gz i dont find it maybe beacause the driver is too old
Re: Howto build unofficial pli for your unsupported receiver #2284
Re: Howto build unofficial pli for your unsupported receiver #2285
Posted 27 August 2018 - 10:35
hi persian prince
after update pli extras with ./update.sh still same error:
Disk /home/python/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-pli-extras-k2pro.img: 604MB
| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number Start End Size Type File system Flags
| 1 4194kB 113MB 109MB primary fat16 boot, lba
| 2 113MB 604MB 491MB primary ext4
|
| mkfs.vfat: file /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
| mkfs.fat 4.1 (2017-01-24)
| WARNING: /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_amlogicsdimg.7098:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
| ERROR: Function failed: do_image_amlogicsdimg (log file is located at /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_amlogicsdimg.7098)
ERROR: Task (/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5909 tasks of which 5675 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
how to fix this error,can you help me.
THANKS
Re: Howto build unofficial pli for your unsupported receiver #2286
Posted 27 August 2018 - 15:30
hi persian prince
after update pli extras with ./update.sh still same error:
Disk /home/python/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-pli-extras-k2pro.img: 604MB
| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number Start End Size Type File system Flags
| 1 4194kB 113MB 109MB primary fat16 boot, lba
| 2 113MB 604MB 491MB primary ext4
|
| mkfs.vfat: file /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
| mkfs.fat 4.1 (2017-01-24)
| WARNING: /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_amlogicsdimg.7098:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
| ERROR: Function failed: do_image_amlogicsdimg (log file is located at /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_amlogicsdimg.7098)
ERROR: Task (/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5909 tasks of which 5675 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
how to fix this error,can you help me.
THANKS
Delete your tmp folder and try again please.
Re: Howto build unofficial pli for your unsupported receiver #2287
Re: Howto build unofficial pli for your unsupported receiver #2288
Posted 27 August 2018 - 15:47
hi persian prince
after update pli extras with ./update.sh still same error:
Disk /home/python/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-pli-extras-k2pro.img: 604MB
| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number Start End Size Type File system Flags
| 1 4194kB 113MB 109MB primary fat16 boot, lba
| 2 113MB 604MB 491MB primary ext4
|
| mkfs.vfat: file /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
| mkfs.fat 4.1 (2017-01-24)
| WARNING: /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_amlogicsdimg.7098:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
| ERROR: Function failed: do_image_amlogicsdimg (log file is located at /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_amlogicsdimg.7098)
ERROR: Task (/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5909 tasks of which 5675 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
how to fix this error,can you help me.
THANKS
Delete your tmp folder and try again please.
thanks for reply,,ok i try delete folder tmp and update again
Re: Howto build unofficial pli for your unsupported receiver #2289
Posted 27 August 2018 - 16:17
hi persian prince
after update pli extras with ./update.sh still same error:
Disk /home/python/openpli-oe-core/build/tmp/deploy/images/k2pro/openpli-enigma2-pli-extras-k2pro.img: 604MB
| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number Start End Size Type File system Flags
| 1 4194kB 113MB 109MB primary fat16 boot, lba
| 2 113MB 604MB 491MB primary ext4
|
| mkfs.vfat: file /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img already exists
| mkfs.fat 4.1 (2017-01-24)
| WARNING: /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_amlogicsdimg.7098:1 exit 1 from 'mkfs.vfat -n "BOOT" -S 512 -C /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/boot.img $BOOT_BLOCKS'
| ERROR: Function failed: do_image_amlogicsdimg (log file is located at /home/python/openpli-oe-core/build/tmp/work/k2pro-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_amlogicsdimg.7098)
ERROR: Task (/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5909 tasks of which 5675 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/python/openpli-oe-core/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_amlogicsdimg
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:125: recipe for target 'image' failed
make: *** [image] Error 1
how to fix this error,can you help me.
THANKS
Delete your tmp folder and try again please.
thanks for reply,,ok i try delete folder tmp and update again
still same error
Re: Howto build unofficial pli for your unsupported receiver #2290
Posted 27 August 2018 - 18:22
New test images for RPi boards (kernel 4.14.66)
raspberrypi0: http://www.mediafire...sdcard.zip/file
raspberrypi: http://www.mediafire...sdcard.zip/file
raspberrypi2: http://www.mediafire...sdcard.zip/file
raspberrypi3: http://www.mediafire...sdcard.zip/file
Hello, great work!! Can you upload again rasperrypi3 version so I can test it?
many thanx
Re: Howto build unofficial pli for your unsupported receiver #2291
Re: Howto build unofficial pli for your unsupported receiver #2292
Posted 27 August 2018 - 21:38
....
thanks for reply,,ok i try delete folder tmp and update again
still same error
ok it's about latest changes on gith sources that made by dear Persian Prince.I think it will be fixed soon.
--first change this line in your local file "sdcard_image-amlogic.bbclass" to this;
SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-sd.img"
--then in your local file "mecool.inc" to this;
IMAGE_FSTYPES ?= "ext4 amlogicsdimg" ............ rm -f ${DEPLOY_DIR_IMAGE}/*-sd.img; \
I think without this, it crashes with boot.img
And dear Persian Prince for k1plus,can you check this in file "rtl8189es-aml_1.0.bb"..
workdir source gives LIC_FILES_CHKSUM error with this.
S = "${WORKDIR}/android_hardware_wifi_realtek_drivers_8189es-f971e4bcbfb5a6109fe2e65dab375f5c63712093/rtl8189ES/"
and works like this on me.
S = "${WORKDIR}/android_hardware_wifi_realtek_drivers_8189es-f971e4b/rtl8189ES/"
Thanks
Re: Howto build unofficial pli for your unsupported receiver #2293
Re: Howto build unofficial pli for your unsupported receiver #2294
Re: Howto build unofficial pli for your unsupported receiver #2295
Posted 28 August 2018 - 05:40
The problem was "-sd" which I forgot to remove and it's ok now.
You don't need to remove the build or tmp folders just use my cleanup script and build again: https://github.com/P...leanup-build.sh
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #2296
Posted 28 August 2018 - 08:07
@muhamad @starz
The problem was "-sd" which I forgot to remove and it's ok now.
You don't need to remove the build or tmp folders just use my cleanup script and build again: https://github.com/P...leanup-build.sh
Ok thank a lot:)
Re: Howto build unofficial pli for your unsupported receiver #2297
Re: Howto build unofficial pli for your unsupported receiver #2298
Posted 28 August 2018 - 11:53
Please where is the latest image for amiko 7111 and one question...
How do i activate swap on this image openpli 6 i use right now?!
Thnx guys
It is currently being adapted to the sh4 image.
On the one hand, it certainly works well.
On the other hand, there are a few problems to log that are puzzling.
There is not (yet) a download for it.
In the previous image, swap intern (zram) is activated.
You do not need an additional swap.
greetings
Re: Howto build unofficial pli for your unsupported receiver #2299
Posted 28 August 2018 - 12:24
meta-broadmedia added:
- bre2zet2c
- sf128
- sf138
- sf3038
meta-gb added:
- gb800se
- gb800seplus
- gb800solo
- gb800ue
- gb800ueplus
- gbipbox
- gbquad
- gbquadplus
- gbultrase
- gbultraue
- gbultraueh
- gbx1
- gbx2
- gbx3
- gbx3h
meta-xt added:
- beyonwizu4
- et13000
Edited by Persian Prince, 28 August 2018 - 12:25.
Open Vision sources: https://github.com/OpenVisionE2
Re: Howto build unofficial pli for your unsupported receiver #2300
Posted 28 August 2018 - 12:52
Some gigablue test images
gb800solo: http://www.mediafire...lo_usb.zip/file
gbipbox: http://www.mediafire...ox_usb.zip/file
gbquad: http://www.mediafire...ad_usb.zip/file
Open Vision sources: https://github.com/OpenVisionE2
8 user(s) are reading this topic
0 members, 8 guests, 0 anonymous users