2740 replies to this topic

[milaebrothers]

This is just great

Would you please share some info about your usb dvb-t? and if it's possible share some pictures

Here some Screenshot of openpli on rpi3!!!

Attached Files

•  info.jpg   121.13KB   9 downloads
•  tuner.jpg   83.47KB   7 downloads
•  autoscan.jpg   89.12KB   7 downloads
•  Rai1HDnovideo.jpg   21.82KB   7 downloads

Edited by milaebrothers, 13 September 2018 - 19:33.

[buc61b]

The latest op6 for amiko 7111 works great.

I need only some help with oscam...

I have created dictonary

Usr/bin/cam/oscam
Usr/bin/keys (my line always worked)

Now it wont work but the oscam is green and lines are moving but channel is dark.

Plugin alternativesoftcamemager

Regards

[ycf83]

hi , how u do to install oscam ??

i have oscam too , but i use oscam-emu to read key form softcam.key so this is my setup 

bin are here :

/usr/bin/oscam-emu

config :

/etc/tuxbox/config/oscam-emu/

and i have this file : SoftCam.Key , constant.cw, oscam.conf, oscam.server, oscam.user

in your oscam.conf u have :http port
 
enter in your browser  :

ip-of-your-box:http-port

to see what happen to your oscam,


also u can run with telnet oscam , and u can see what's error :

/usr/bin/oscam  -r2  -c  /patch-to-your-config

 

 

 

The latest op6 for amiko 7111 works great.

I need only some help with oscam...

I have created dictonary

Usr/bin/cam/oscam
Usr/bin/keys (my line always worked)

Now it wont work but the oscam is green and lines are moving but channel is dark.

Plugin alternativesoftcamemager

Regards

[numero53]

 

This is just great

Would you please share some info about your usb dvb-t? and if it's possible share some pictures

Here some Screenshot of openpli on rpi3!!!

 

I can confirm that it's working also on rp1!! However, neither I am able to see any channel, just black screen.

I don't know if there is a problem with my setup, but I just have black screen when I start my device. I have to restart Enigma2 using the webif to see something on screen

[buc61b]

hi , how u do to install oscam ??

i have oscam too , but i use oscam-emu to read key form softcam.key so this is my setup 

bin are here :

/usr/bin/oscam-emu

config :

/etc/tuxbox/config/oscam-emu/

and i have this file : SoftCam.Key , constant.cw, oscam.conf, oscam.server, oscam.user

in your oscam.conf u have :http port
 
enter in your browser  :

ip-of-your-box:http-port

to see what happen to your oscam,


also u can run with telnet oscam , and u can see what's error :

/usr/bin/oscam  -r2  -c  /patch-to-your-config

The latest op6 for amiko 7111 works great.

I need only some help with oscam...

I have created dictonary

Usr/bin/cam/oscam
Usr/bin/keys (my line always worked)

Now it wont work but the oscam is green and lines are moving but channel is dark.

Plugin alternativesoftcamemager

Regards

So ur saying i have to put lines etc/tuxbox/emu oscam...?

I am little bit confused but will try this latter

Any suggestion is welcome

[Maksyuha]

The last image for st7111 encoded channels does not open with the help of an emulator, there are keys to ecminfo, but the screen is dark. wicardd emulator.

[satforindo]

The last image for st7111 encoded channels does not open with the help of an emulator, there are keys to ecminfo, but the screen is dark. wicardd emulator.

 

As far as I know, STi7111 needs a pti.ko file which is not open source. May be you can copy this file from other working image.

[Maksyuha]

I tried to replace the pti.ko with the working image, generally stopped opening any channels that were not even coded. I think replacing pti.ko is not a good idea.

[satforindo]

One thing about binary file is, it needs to be suitable with the kernel used by the current image. You can edit the pti.ko binary, check the line like this: "2.6.32.xx". The "xx" stand to the numbers which should be the same between the working pti.ko and the current image kernel.

[ycf83]

hi, i get error with error with : openembedded-core/meta/recipes-extended/quota/quota_4.03.bb:do_configure

 

dm 500hd.

Initialising tasks: 100% |#######################################################################################################################################################################################| Time: 0:00:17
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: quota-4.03-r0 do_configure: configure failed
ERROR: quota-4.03-r0 do_configure: Function failed: do_configure (log file is located at /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/temp/log.do_configure.28648)
ERROR: Logfile of failure stored in: /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/temp/log.do_configure.28648
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'mips-common', 'common-linux', 'common-glibc', 'mipsel-linux', 'common']
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing python function autotools_aclocals
| DEBUG: SITE files ['endian-little', 'bit-32', 'mips-common', 'common-linux', 'common-glibc', 'mipsel-linux', 'common']
| DEBUG: Python function autotools_aclocals finished
| DEBUG: Executing shell function do_configure
| NOTE: Executing ACLOCAL="aclocal --system-acdir=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot/usr/share/aclocal/" autoreconf --verbose --install --force --exclude=autopoint -I /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/share/aclocal/
| NOTE: Running ./configure  --build=x86_64-linux 		  --host=mipsel-oe-linux 		  --target=mipsel-oe-linux 		  --prefix=/usr 		  --exec_prefix=/usr 		  --bindir=/usr/bin 		  --sbindir=/usr/sbin 		  --libexecdir=/usr/libexec 		  --datadir=/usr/share 		  --sysconfdir=/etc 		  --sharedstatedir=/com 		  --localstatedir=/var 		  --libdir=/usr/lib 		  --includedir=/usr/include 		  --oldincludedir=/usr/include 		  --infodir=/usr/share/info 		  --mandir=/usr/share/man 		  --disable-silent-rules 	  --disable-dependency-tracking 		  --with-libtool-sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot   --enable-bsd_behaviour=yes --disable-ldapmail --enable-rpc --enable-libwrap --enable-nls
| NOTE: The following config.log files may provide further information.
| NOTE: /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/quota-4.03/config.log
| ERROR: configure failed
| automake (GNU automake) 1.15
| Copyright (C) 2014 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Written by Tom Tromey <tromey@redhat.com>
|        and Alexandre Duret-Lutz <adl@gnu.org>.
| AUTOV is 1
| autoreconf: Entering directory `.'
| autoreconf: running: aclocal --system-acdir=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot/usr/share/aclocal/ -I /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/share/aclocal/ --force -I m4
| autoreconf: configure.ac: tracing
| autoreconf: configure.ac: not using Libtool
| autoreconf: running: /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/bin/autoconf --include=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/share/aclocal/ --force
| autoreconf: running: /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/bin/autoheader --include=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/share/aclocal/ --force
| autoreconf: running: automake --add-missing --copy --force-missing
| autoreconf: running: gnu-configize
| autoreconf: Leaving directory `.'
| configure: WARNING: unrecognized options: --with-libtool-sysroot
| configure: loading site script /home/d-ina/OpenPLI/openpli-oe-core/meta-openembedded/meta-oe/site/endian-little
| configure: loading site script /home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/site/endian-little
| configure: loading site script /home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/site/mips-common
| configure: loading site script /home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/site/common-linux
| configure: loading site script /home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/site/common-glibc
| configure: loading site script /home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/site/mipsel-linux
| configure: loading site script /home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/site/common
| checking for a BSD-compatible install... /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/hosttools/install -c
| checking whether build environment is sane... yes
| checking for mipsel-oe-linux-strip... mipsel-oe-linux-strip
| checking for a thread-safe mkdir -p... /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/hosttools/mkdir -p
| checking for gawk... gawk
| checking whether make sets $(MAKE)... yes
| checking whether make supports nested variables... yes
| checking whether make supports nested variables... (cached) yes
| checking for style of include used by make... GNU
| checking for mipsel-oe-linux-gcc... mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot
| checking whether the C compiler works... yes
| checking for C compiler default output file name... a.out
| checking for suffix of executables...
| checking whether we are cross compiling... yes
| checking for suffix of object files... o
| checking whether we are using the GNU C compiler... yes
| checking whether mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot accepts -g... yes
| checking for mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot option to accept ISO C89... unsupported
| checking whether mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot understands -c and -o together... yes
| checking dependency style of mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot... none
| checking for mipsel-oe-linux-ar... mipsel-oe-linux-ar
| checking the archiver (mipsel-oe-linux-ar) interface... ar
| checking for mipsel-oe-linux-cc... (cached) mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot
| checking whether we are using the GNU C compiler... (cached) yes
| checking whether mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot accepts -g... (cached) yes
| checking for mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot option to accept ISO C89... (cached) unsupported
| checking whether mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot understands -c and -o together... (cached) yes
| checking dependency style of mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot... (cached) none
| checking for mipsel-oe-linux-ranlib... mipsel-oe-linux-ranlib
| checking whether ln -s works... yes
| checking whether make sets $(MAKE)... (cached) yes
| checking for mipsel-oe-linux-pkg-config... no
| checking for pkg-config... /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/bin/pkg-config
| configure: WARNING: using cross tools not prefixed with host triplet
| checking pkg-config is at least version 0.20... yes
| checking for an ANSI C-conforming const... yes
| checking for inline... inline
| checking for a sed that does not truncate output... (cached) sed
| checking whether NLS is requested... yes
| checking for msgfmt... /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/bin/msgfmt
| checking for gmsgfmt... /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/bin/msgfmt
| checking for xgettext... /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/bin/xgettext
| checking for msgmerge... /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot-native/usr/bin/msgmerge
| checking build system type... x86_64-pc-linux-gnu
| checking host system type... mipsel-oe-linux-gnu
| checking for ld used by mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot... mipsel-oe-linux-ld --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot
| checking if the linker (mipsel-oe-linux-ld --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot ) is GNU ld... yes
| checking for shared library run path origin... done
| checking how to run the C preprocessor... mipsel-oe-linux-gcc -E --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot  -mel -mabi=32 -mhard-float -march=mips32
| configure: error: in `/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/quota-4.03':
| configure: error: C preprocessor "mipsel-oe-linux-gcc -E --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot  -mel -mabi=32 -mhard-float -march=mips32" fails sanity check
| See `config.log' for more details
| ERROR: Function failed: do_configure (log file is located at /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/temp/log.do_configure.28648)
ERROR: Task (/home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/recipes-extended/quota/quota_4.03.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3322 tasks of which 3315 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/recipes-extended/quota/quota_4.03.bb:do_configure
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [Makefile:126: image] Error 1

[buc61b]

I tried to replace the pti.ko with the working image, generally stopped opening any channels that were not even coded. I think replacing pti.ko is not a good idea.

 

 

I am backing to my previos image. thanks for leting me know that this image doesnt go with emu oscam...

 

Regards

 

ps, if you find solution please post it here....

[Beeker]

@ycf83

 

Yeah. libnl 3.2.24 was the problem.

 

Update pli-extras and run build again (probably from scratch, sorry).

Edited by Beeker, 15 September 2018 - 12:47.

[Maksyuha]

It seemed to get an image from the coded channels, replaced two files.

 

lib\modules\2.6.32.71_stm24_0217\extra\pti\pti.ko

lib\modules\2.6.32.71_stm24_0217\extra\player2\linux\drivers\media\dvb\stm\dvb\stmdvb.ko

 

 

Attached Files

•  modules.zip   75.96KB   9 downloads

[ycf83]

@ycf83

 

Yeah. libnl 3.2.24 was the problem.

 

Update pli-extras and run build again (probably from scratch, sorry).

 

thnk's bro , 

 

i run pli-extras update ,

From https://github.com/PLi-metas/pli-extras
   d022677..d553cdc  develop    -> origin/develop
Fetching submodule meta-fulan
From https://github.com/PLi-metas/meta-fulan
   bd4e117..96c332b  develop    -> origin/develop
Updating d022677..d553cdc
Fast-forward
 conf/layer.conf                                                             |    2 +
 meta-fulan                                                                  |    2 +-
 recipes-support/libnl/libnl/fix-lib-cache_mngr.c-two-parentheses-bugs.patch |   37 ++
 recipes-support/libnl/libnl/fix-pc-file.patch                               |   17 +
 recipes-support/libnl/libnl/fix-pktloc_syntax_h-race.patch                  |   36 ++
 recipes-support/libnl/libnl/nl80211-header.patch                            | 2676 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 recipes-support/libnl/libnl/stubs-o32_hard.h                                |   20 ++
 recipes-support/libnl/libnl/tc_ematch-header-files.patch                    |   72 ++++
 recipes-support/libnl/libnl_3.2.24.bb                                       |   68 ++++
 9 files changed, 2929 insertions(+), 1 deletion(-)
 create mode 100644 recipes-support/libnl/libnl/fix-lib-cache_mngr.c-two-parentheses-bugs.patch
 create mode 100644 recipes-support/libnl/libnl/fix-pc-file.patch
 create mode 100644 recipes-support/libnl/libnl/fix-pktloc_syntax_h-race.patch
 create mode 100644 recipes-support/libnl/libnl/nl80211-header.patch
 create mode 100644 recipes-support/libnl/libnl/stubs-o32_hard.h
 create mode 100644 recipes-support/libnl/libnl/tc_ematch-header-files.patch
 create mode 100644 recipes-support/libnl/libnl_3.2.24.bb

but i get the same error i think

| checking for ld used by mipsel-oe-linux-gcc  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot... mipsel-oe-linux-ld --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot
| checking if the linker (mipsel-oe-linux-ld --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot ) is GNU ld... yes
| checking for shared library run path origin... done
| checking how to run the C preprocessor... mipsel-oe-linux-gcc -E --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot  -mel -mabi=32 -mhard-float -march=mips32
| configure: error: in `/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/quota-4.03':
| configure: error: C preprocessor "mipsel-oe-linux-gcc -E --sysroot=/home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/recipe-sysroot  -mel -mabi=32 -mhard-float -march=mips32" fails sanity check
| See `config.log' for more details
| WARNING: /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/temp/run.do_configure.26143:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_configure (log file is located at /home/d-ina/OpenPLI/openpli-oe-core/build/tmp/work/mips32el-oe-linux/quota/4.03-r0/temp/log.do_configure.26143)
ERROR: Task (/home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/recipes-extended/quota/quota_4.03.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3338 tasks of which 3324 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/d-ina/OpenPLI/openpli-oe-core/openembedded-core/meta/recipes-extended/quota/quota_4.03.bb:do_configure
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [Makefile:126: image] Error 1

[Beeker]

Hmm.. I did build dm8000 and Cube, no problem.

 

Try:

cd build
source env.source
MACHINE=dm500 bitbake -c cleanall quota
cd ..

And run build again.

 

Otherwise delete tmp directory in build directory. That triggers no rebuild of all packages.

[ycf83]

ok, problem solved , remove tmp folder .

 

thnk's brother ,

 

i get this warning it's normall ???

Initialising tasks: 100% |#######################################################################################################################################################################################| Time: 0:00:17
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: gawk-4.1.4-r0 do_package_qa: QA Issue: gawk: /gawk/usr/libexec/awk/grcat is owned by uid 1000, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
WARNING: perl-5.24.1-r0 do_package_qa: QA Issue: perl: /perl-lib/usr/lib/libperl.so.5.24.1 is owned by uid 1000, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
WARNING: enigma2-plugins-y-gitAUTOINC+06e33d452a-r0 do_package_qa: QA Issue: non -staticdev package contains static .a library: enigma2-plugin-systemplugins-networkbrowser path '/work/mips32el-oe-linux/enigma2-plugins/y-gitAUTOINC+06e33d452a-r0/packages-split/enigma2-plugin-systemplugins-networkbrowser/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkBrowser/netscan.a' [staticdev]
NOTE: Tasks Summary: Attempted 5445 tasks of which 2894 didn't need to be rerun and all succeeded.

Summary: There were 3 WARNING messages shown.

[Beeker]

 

ok, problem solved , remove tmp folder .

 

thnk's brother ,

 

i get this warning it's normall ???

Initialising tasks: 100% |#######################################################################################################################################################################################| Time: 0:00:17
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: gawk-4.1.4-r0 do_package_qa: QA Issue: gawk: /gawk/usr/libexec/awk/grcat is owned by uid 1000, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
WARNING: perl-5.24.1-r0 do_package_qa: QA Issue: perl: /perl-lib/usr/lib/libperl.so.5.24.1 is owned by uid 1000, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
WARNING: enigma2-plugins-y-gitAUTOINC+06e33d452a-r0 do_package_qa: QA Issue: non -staticdev package contains static .a library: enigma2-plugin-systemplugins-networkbrowser path '/work/mips32el-oe-linux/enigma2-plugins/y-gitAUTOINC+06e33d452a-r0/packages-split/enigma2-plugin-systemplugins-networkbrowser/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkBrowser/netscan.a' [staticdev]
NOTE: Tasks Summary: Attempted 5445 tasks of which 2894 didn't need to be rerun and all succeeded.

Summary: There were 3 WARNING messages shown.

 

It's not normal.

They should be solved in the future.

But it's no problem either.

[buc61b]

It seemed to get an image from the coded channels, replaced two files.

lib\modules\2.6.32.71_stm24_0217\extra\pti\pti.ko
lib\modules\2.6.32.71_stm24_0217\extra\player2\linux\drivers\media\dvb\stm\dvb\stmdvb.ko

So did you fixed the lines oscam for amiko 7111?

[ycf83]

 

 

ok, problem solved , remove tmp folder .

 

thnk's brother ,

 

i get this warning it's normall ???

Initialising tasks: 100% |#######################################################################################################################################################################################| Time: 0:00:17
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: gawk-4.1.4-r0 do_package_qa: QA Issue: gawk: /gawk/usr/libexec/awk/grcat is owned by uid 1000, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
WARNING: perl-5.24.1-r0 do_package_qa: QA Issue: perl: /perl-lib/usr/lib/libperl.so.5.24.1 is owned by uid 1000, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
WARNING: enigma2-plugins-y-gitAUTOINC+06e33d452a-r0 do_package_qa: QA Issue: non -staticdev package contains static .a library: enigma2-plugin-systemplugins-networkbrowser path '/work/mips32el-oe-linux/enigma2-plugins/y-gitAUTOINC+06e33d452a-r0/packages-split/enigma2-plugin-systemplugins-networkbrowser/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkBrowser/netscan.a' [staticdev]
NOTE: Tasks Summary: Attempted 5445 tasks of which 2894 didn't need to be rerun and all succeeded.

Summary: There were 3 WARNING messages shown.

 

It's not normal.

They should be solved in the future.

But it's no problem either.

 

 

 

ok bro , all okayy thnk's for your help , and ur hard work ;

↳ telnet 192.168.1.60
Trying 192.168.1.60...
Connected to 192.168.1.60.
Escape character is '^]'.

openpli homebuild dm500hd

dm500hd login: root
root@dm500hd:~# init 4 && opkg update && opkg upgrade && reboot
Downloading http://downloads.openpli.org/feeds/openpli-6-release/3rd-party-dm500hd/Packages.gz.
Updated source 'openpli-3rd-party-dm500hd'.
Downloading http://downloads.openpli.org/feeds/openpli-6-release/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://192.168.1.73/feeds/openpli-homebuild/all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://192.168.1.73/feeds/openpli-homebuild/dm500hd/Packages.gz.
Updated source 'openpli-dm500hd'.
Downloading http://192.168.1.73/feeds/openpli-homebuild/mips32el/Packages.gz.
Updated source 'openpli-mips32el'.
Upgrading openpli-bootlogo from 20180913-r0 to 20180915-r0 on root.
Upgrading openpli-bootlogo (20180915) on root.
Downloading http://192.168.1.73/feeds/openpli-homebuild/mips32el/openpli-bootlogo_20180915-r0_mips32el.ipk.
update-rc.d: /etc/init.d/bootlogo exists during rc.d purge (continuing)
 Removing any system startup links for bootlogo ...
  /etc/rcS.d/S21bootlogo
update-rc.d: /etc/init.d/bootlogo exists during rc.d purge (continuing)
 Removing any system startup links for bootlogo ...
Upgrading enigma2-plugin-systemplugins-networkbrowser from y-git4827+18c53a1-r0 to y-git4828+06e33d4-r0 on root.
Upgrading enigma2-plugin-systemplugins-networkbrowser (y-git4828+06e33d4) on root.
Downloading http://192.168.1.73/feeds/openpli-homebuild/mips32el/enigma2-plugin-systemplugins-networkbrowser_y-git4828+06e33d4-r0_mips32el.ipk.
Upgrading enigma2-plugin-extensions-moviecut from y-git4827+18c53a1-r0 to y-git4828+06e33d4-r0 on root.
Upgrading enigma2-plugin-extensions-moviecut (y-git4828+06e33d4) on root.
Downloading http://192.168.1.73/feeds/openpli-homebuild/mips32el/enigma2-plugin-extensions-moviecut_y-git4828+06e33d4-r0_mips32el.ipk.
Upgrading enigma2-plugin-skins-pli-hd from 0.1+git1796+e13248d-r0 to 0.1+git1801+384366a-r0 on root.
Upgrading enigma2-plugin-skins-pli-hd (0.1+git1801+384366a) on root.
Downloading http://192.168.1.73/feeds/openpli-homebuild/all/enigma2-plugin-skins-pli-hd_0.1+git1801+384366a-r0_all.ipk.
Upgrading enigma2-plugin-systemplugins-systemtime from y-git4827+18c53a1-r0 to y-git4828+06e33d4-r0 on root.
Upgrading enigma2-plugin-systemplugins-systemtime (y-git4828+06e33d4) on root.
Downloading http://192.168.1.73/feeds/openpli-homebuild/mips32el/enigma2-plugin-systemplugins-systemtime_y-git4828+06e33d4-r0_mips32el.ipk.
Upgrading libfribidi0 from 0.19.7-r0 to 1.0.5-r0 on root.
Upgrading libfribidi0 (1.0.5) on root.
Downloading http://192.168.1.73/feeds/openpli-homebuild/mips32el/libfribidi0_1.0.5-r0_mips32el.ipk.
Removing obsolete file /usr/lib/libfribidi.so.0.3.6.
Upgrading enigma2-plugins from y-git4827+18c53a1-r0 to y-git4828+06e33d4-r0 on root.
Upgrading enigma2-plugins (y-git4828+06e33d4) on root.
Downloading http://192.168.1.73/feeds/openpli-homebuild/mips32el/enigma2-plugins_y-git4828+06e33d4-r0_mips32el.ipk.
Upgrading enigma2-plugin-extensions-audiosync from y-git4827+18c53a1-r0 to y-git4828+06e33d4-r0 on root.
Upgrading enigma2-plugin-extensions-audiosync (y-git4828+06e33d4) on root.
Downloading http://192.168.1.73/feeds/openpli-homebuild/mips32el/enigma2-plugin-extensions-audiosync_y-git4828+06e33d4-r0_mips32el.ipk.
Configuring openpli-bootlogo.
 Adding system startup for /etc/init.d/bootlogo.
Configuring enigma2-plugin-systemplugins-networkbrowser.
Configuring enigma2-plugin-extensions-moviecut.
Configuring enigma2-plugin-skins-pli-hd.
Configuring enigma2-plugin-systemplugins-systemtime.
Configuring libfribidi0.
Configuring enigma2-plugins.
Configuring enigma2-plugin-extensions-audiosync.

Broadcast message from root@dm500hd (pts/0) (Sat Sep 15 20:17:17 2018):

The system is going down for reboot NOW!
root@dm500hd:~#

[zeros]

pli-extras-dm7020hd-15.09.2018
https://www.online.e...f9-6c1271d96f79
pli-extras-dm7020hdv2-15.09.2018
https://www.online.e...90-c884df28e331