Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #2581 ndminion

  • Member
  • 5 posts

0
Neutral

Posted 25 October 2018 - 10:41

Persian Prince thanks for support Azbox! Work fine image on Azbox HD, but has problems  on MultiCast (do not playing 1:0:0 if  writing on IPTV  or PowerVU (httpstream). On gstreamer 4097 playing correctly) and problem playing on plugin youtube. And VFD display do not write cyrrilic text. 


Edited by ndminion, 25 October 2018 - 10:43.


Re: Howto build unofficial pli for your unsupported receiver #2582 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 25 October 2018 - 15:28

Test feed for dm900 and dm920 updated. 2018-10-25

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #2583 Adga

  • Senior Member
  • 140 posts

+9
Neutral

Posted 25 October 2018 - 17:16

Test feed for dm900 and dm920 updated. 2018-10-25

Update your DM900. Everything works fine :)


DM900 UHD + Formuler Z8 (IPTV) + 520 HD + DM7080HD + DM8000HD


Re: Howto build unofficial pli for your unsupported receiver #2584 kloklo

  • Senior Member
  • 35 posts

0
Neutral

Posted 26 October 2018 - 17:41

openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot-native= -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot=  -c -o opkg.o ../../opkg-0.3.6/src/opkg.c
| ERROR: oe_runmake failed
| ../mipsel-oe-linux-libtool  --tag=CC   --mode=link mipsel-oe-linux-gcc  -mel -mabi=32 -msoft-float -march=mips32 --sysroot=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot -I../../opkg-0.3.6/libopkg -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0=/usr/src/debug/opkg/2_0.3.6-r0 -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot-native= -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot=   -Wl,-O1  -Wl,--as-needed -o opkg opkg.o ../libopkg/libopkg.la
| mipsel-oe-linux-libtool: link: mipsel-oe-linux-gcc -mel -mabi=32 -msoft-float -march=mips32 --sysroot=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot -I../../opkg-0.3.6/libopkg -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0=/usr/src/debug/opkg/2_0.3.6-r0 -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot-native= -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot= -Wl,-O1 -Wl,--as-needed -o .libs/opkg opkg.o  ../libopkg/.libs/libopkg.so -larchive -lsolv
| ../libopkg/.libs/libopkg.so: undefined reference to `archive_write_set_format_raw'
| collect2: error: ld returned 1 exit status
| Makefile:400: recipe for target 'opkg' failed
| make[2]: *** [opkg] Error 1
| make[2]: Leaving directory '/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/build/src'
| Makefile:498: recipe for target 'all-recursive' failed
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory '/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/build'
| Makefile:386: recipe for target 'all' failed
| make: *** [all] Error 2
| WARNING: /home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/temp/run.do_compile.28674:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/temp/log.do_compile.28674)
ERROR: Task (/home/elhawary/openpli-oe-core/meta-openpli/recipes-devtools/opkg/opkg_0.3.6.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5689 tasks of which 4612 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/elhawary/openpli-oe-core/meta-openpli/recipes-devtools/opkg/opkg_0.3.6.bb:do_compile

Summary: There were 14 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
 



Re: Howto build unofficial pli for your unsupported receiver #2585 challou

  • Member
  • 20 posts

0
Neutral

Posted 27 October 2018 - 01:17

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????



Re: Howto build unofficial pli for your unsupported receiver #2586 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 27 October 2018 - 11:01

openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot-native= -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot=  -c -o opkg.o ../../opkg-0.3.6/src/opkg.c
| ERROR: oe_runmake failed
| ../mipsel-oe-linux-libtool  --tag=CC   --mode=link mipsel-oe-linux-gcc  -mel -mabi=32 -msoft-float -march=mips32 --sysroot=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot -I../../opkg-0.3.6/libopkg -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0=/usr/src/debug/opkg/2_0.3.6-r0 -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot-native= -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot=   -Wl,-O1  -Wl,--as-needed -o opkg opkg.o ../libopkg/libopkg.la
| mipsel-oe-linux-libtool: link: mipsel-oe-linux-gcc -mel -mabi=32 -msoft-float -march=mips32 --sysroot=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot -I../../opkg-0.3.6/libopkg -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0=/usr/src/debug/opkg/2_0.3.6-r0 -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot-native= -fdebug-prefix-map=/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/recipe-sysroot= -Wl,-O1 -Wl,--as-needed -o .libs/opkg opkg.o  ../libopkg/.libs/libopkg.so -larchive -lsolv
| ../libopkg/.libs/libopkg.so: undefined reference to `archive_write_set_format_raw'
| collect2: error: ld returned 1 exit status
| Makefile:400: recipe for target 'opkg' failed
| make[2]: *** [opkg] Error 1
| make[2]: Leaving directory '/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/build/src'
| Makefile:498: recipe for target 'all-recursive' failed
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory '/home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/build'
| Makefile:386: recipe for target 'all' failed
| make: *** [all] Error 2
| WARNING: /home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/temp/run.do_compile.28674:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /home/elhawary/openpli-oe-core/build/tmp/work/mips32el-nf-oe-linux/opkg/2_0.3.6-r0/temp/log.do_compile.28674)
ERROR: Task (/home/elhawary/openpli-oe-core/meta-openpli/recipes-devtools/opkg/opkg_0.3.6.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5689 tasks of which 4612 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/elhawary/openpli-oe-core/meta-openpli/recipes-devtools/opkg/opkg_0.3.6.bb:do_compile

Summary: There were 14 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
 

 

Update pli-extras and try again.

 

https://github.com/P...f27372871b192c9


Edited by Beeker, 27 October 2018 - 11:06.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #2587 atef

  • Senior Member
  • 92 posts

+1
Neutral

Posted 27 October 2018 - 20:18

Please fix the problem

Blind scan crash log

Blind scan crash log
====================
OpenPLi Enigma2 crash log

crashdate=Sat Oct 27 21:44:41 2018
compiledate=Oct 26 2018
skin=CinoDreamOsatPLi-Gri/skin.xml
sourcedate=2018-10-26
branch=develop
rev=e45455e
component=Enigma2

stbmodel=dm820
kernelcmdline=bmem=512M@512M memc1=768M console=ttyS0,1000000 root=/dev/mmcblk0p1 rootwait rootfstype=ext4
nimsockets=NIM Socket 0:
imageissue=openpli pli-extras %h


REMOVE Peer dm820
REMOVE Peer dm820
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 210, in processDelay
    callback(*retval)
  File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
TypeError: BlindscanCallback() takes exactly 2 arguments (1 given)


dmesg

<4>[   74.154000] sync0 is off so we enable it
<4>[   74.155000] sync0: allocated pcroffset 0
<4>[   74.155000] sync0: playback!
<4>[   74.156000] VIDEO0: total delay: 0 (0 ms)
<4>[   74.161000] VIDEO0: start decode
<4>[   74.162000] VIDEO0: flush video decoder
<4>[   74.162000] VIDEO0 use saved pts 0x2a30 (ret 0)
<4>[   74.202000] VIDEO0: first pts 0x0
<4>[   74.320000] VIDEO0: stop decode
<4>[   74.320000] sync0 1fff no decoder left in sync handling so disable
<4>[   74.321000] sync0: was last pcroffset0 user so free it
<3>[   75.202000] bcm_accel: invalid opcode! 00000080
<4>[   75.364000] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
<4>[   75.365000] HDMI: CEC returned state 3
<4>[   75.366000] HDMI: CEC state now 803
<6>[   75.394000] bcm4506: channel 0 is in normal mode now
<6>[   75.408000] bcm4506: channel 0 is sleeping now
<4>[   75.408000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[   75.423000] set current avs auto aspect to 16:9
<4>[   75.423000] set sb to 3(1)
<4>[   75.424000] VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[   79.252000] set current avs auto aspect to 16:9
<4>[   79.253000] set sb to 3(1)
<4>[   79.253000] set current avs auto aspect to 16:9
<4>[   79.254000] set sb to 3(1)
<4>[   79.255000] set input to 0
<4>[   79.255000] set fb to 2(-1)
<4>[   79.256000] set current avs auto aspect to 16:9
<4>[   79.256000] set sb to 3(1)
<4>[   79.257000] set ac3 to downmix
<4>[   79.258000] set aac to downmix
<4>[   79.261000] set mute 0 1
<4>[   82.698000] set current avs auto aspect to 16:9
<4>[   82.699000] set sb to 3(1)
<4>[   82.699000] set current avs auto aspect to 16:9
<4>[   82.700000] set sb to 3(1)
<4>[   82.701000] set current avs auto aspect to 16:9
<4>[   82.701000] set sb to 3(1)
<4>[   82.703000] set current avs auto aspect to 16:9
<4>[   82.703000] set sb to 3(1)
<4>[   82.704000] set current avs auto aspect to 16:9
<4>[   82.704000] set sb to 3(1)
<4>[   82.705000] set current avs auto aspect to 16:9
<4>[   82.706000] set sb to 3(1)
<4>[   82.707000] set current avs auto aspect to 16:9
<4>[   82.707000] set sb to 3(1)
<4>[   82.708000] set current avs auto aspect to 16:9
<4>[   82.709000] set sb to 3(1)
<4>[   82.709000] set current avs auto aspect to 16:9
<4>[   82.710000] set sb to 3(1)
<4>[   82.711000] set current avs auto aspect to 16:9
<4>[   82.712000] set sb to 3(1)
<4>[   82.712000] set current avs auto aspect to 16:9
<4>[   82.713000] set sb to 3(1)
<4>[   82.713000] set current avs auto aspect to 16:9
<4>[   82.714000] set sb to 3(1)
<4>[   82.715000] set current avs auto aspect to 16:9
<4>[   82.716000] set sb to 3(1)
<4>[   82.716000] set current avs auto aspect to 16:9
<4>[   82.717000] set sb to 3(1)
<4>[   82.718000] set current avs auto aspect to 16:9
<4>[   82.719000] set sb to 3(1)
<4>[   82.719000] set current avs auto aspect to 16:9
<4>[   82.720000] set sb to 3(1)
<4>[   82.720000] set current avs auto aspect to 16:9
<4>[   82.721000] set sb to 3(1)
<6>[   84.932000] bcm4506: channel 0 is in normal mode now
<4>[   86.275000] start PCR0 on dmx 0 pid:7b3 index 4
<4>[   86.276000] start AUDIO0 on dmx 0 pid:7b4 index 7
<4>[   86.276000] audio ch0: xpt start
<4>[   86.277000] audio ch0: reset GA threshold to 8ms
<4>[   86.277000] sync0 is off so we enable it
<4>[   86.278000] sync0: allocated pcroffset 0
<4>[   86.278000] sync0: demux-index 0 pcr pid 7b3
<4>[   86.279000] sync0: using 4 as pcr pidchannel
<4>[   86.279000] audio ch0: MPEG
<4>[   86.280000] audio ch0: streamtype set 0
<4>[   86.280000] audio ch0: streamtype_set: stop rave
<4>[   86.281000] audio ch0: add stereo input to mixer DAC
<4>[   86.281000] audio ch0: add stereo input to mixer SPDIF
<4>[   86.282000] audio ch0: add stereo input to mixer MAI
<4>[   86.283000] audio ch0: mai sample rate changed isr (48000)
<4>[   86.283000] audio ch0: streamtype_set: restart rave
<4>[   86.284000] audio ch0: decoder start
<4>[   86.284000] audio ch0 delay 18000 (200 ms)
<4>[   86.285000] VIDEO0: total delay: 18000 (200 ms)
<4>[   86.288000] start VIDEO0 on dmx 0 pid:7b3 index 4
<4>[   86.289000] VIDEO0: total delay: 18000 (200 ms)
<4>[   86.294000] VIDEO0: start decode
<4>[   86.425000] audio ch0: first pts 0x3c4f485e, stc 0xb8c25712, pcr valid
<4>[   92.022000] rtc set to 1540664208
<4>[   92.023000] rtc set to valid now
<4>[  103.575000] stop PCR0 on dmx 0 pid:7b3
<4>[  103.576000] stop VIDEO0 on dmx 0 pid:7b3
<4>[  103.577000] VIDEO0 use saved pts 0x1c20 (ret 0)
<4>[  103.578000] VIDEO0: stop decode
<4>[  103.578000] VIDEO0: set blank to 1
<4>[  103.579000] audio ch0: use saved pts 0x3c4f485e (0x3c4f485e) (ret 1)
<4>[  103.579000] audio ch0: decoder stop
<4>[  103.600000] stop AUDIO0 on dmx 0 pid:7b4
<4>[  103.600000] audio ch0: xpt stop
<4>[  103.600000] sync0 1fff no decoder left in sync handling so disable
<4>[  103.601000] sync0: was last pcroffset0 user so free it
<4>[  103.968000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  104.043000] set current avs auto aspect to 16:9
<4>[  104.043000] set sb to 3(1)
<4>[  104.131000] start PCR0 on dmx 0 pid:19a1 index 4
<4>[  104.132000] start AUDIO0 on dmx 0 pid:19a2 index 7
<4>[  104.132000] audio ch0: xpt start
<4>[  104.133000] sync0 is off so we enable it
<4>[  104.133000] sync0: allocated pcroffset 0
<4>[  104.134000] sync0: demux-index 0 pcr pid 19a1
<4>[  104.134000] sync0: using 4 as pcr pidchannel
<4>[  104.135000] audio ch0: MPEG
<4>[  104.135000] audio ch0: decoder start
<4>[  104.136000] audio ch0 delay 18000 (200 ms)
<4>[  104.136000] VIDEO0: total delay: 18000 (200 ms)
<4>[  104.139000] VIDEO0: set streamtype!
<4>[  104.139000] ->      set MPEG2
<4>[  104.140000] ->      sw rave disabled!
<4>[  104.140000] audio ch0: video delay 0 (0 ms)
<4>[  104.141000] VIDEO0: total delay: 0 (0 ms)
<4>[  104.141000] start VIDEO0 on dmx 0 pid:19a1 index 4
<4>[  104.142000] VIDEO0: total delay: 0 (0 ms)
<4>[  104.148000] VIDEO0: start decode
<4>[  104.334000] audio ch0: first pts 0xef6c455e, stc 0xef6c2ff4, pcr valid
<4>[  104.355000] audio ch0: lock
<4>[  104.356000] audio ch0: sample rate changed isr (48000)
<4>[  104.440000] audio ch0: status ready isr
<4>[  105.403000] VIDEO0: first pts 0xef6e3e88
<4>[  105.403000] VIDEO0: resolution changed (704 576)
<4>[  105.554000] VIDEO0: enable tsm
<4>[  106.652000] stop PCR0 on dmx 0 pid:19a1
<4>[  106.652000] stop VIDEO0 on dmx 0 pid:19a1
<4>[  106.654000] VIDEO0: stop decode
<4>[  106.654000] audio ch0: decoder stop
<4>[  106.675000] stop AUDIO0 on dmx 0 pid:19a2
<4>[  106.675000] audio ch0: xpt stop
<4>[  106.675000] sync0 1fff no decoder left in sync handling so disable
<4>[  106.676000] sync0: was last pcroffset0 user so free it
<4>[  107.555000] start PCR0 on dmx 0 pid:1cc1 index 4
<4>[  107.556000] start AUDIO0 on dmx 0 pid:1cc2 index 7
<4>[  107.556000] audio ch0: xpt start
<4>[  107.557000] sync0 is off so we enable it
<4>[  107.557000] sync0: allocated pcroffset 0
<4>[  107.558000] sync0: demux-index 0 pcr pid 1cc1
<4>[  107.558000] sync0: using 4 as pcr pidchannel
<4>[  107.559000] audio ch0: MPEG
<4>[  107.559000] audio ch0: decoder start
<4>[  107.559000] audio ch0: video delay 0 (0 ms)
<4>[  107.560000] VIDEO0: total delay: 0 (0 ms)
<4>[  107.562000] start VIDEO0 on dmx 0 pid:1cc1 index 4
<4>[  107.563000] VIDEO0: total delay: 0 (0 ms)
<4>[  107.569000] VIDEO0: start decode
<4>[  107.639000] audio ch0: first pts 0xef55af74, stc 0xef559984, pcr valid
<4>[  107.660000] audio ch0: lock
<4>[  107.660000] audio ch0: sample rate changed isr (48000)
<4>[  107.747000] audio ch0: status ready isr
<4>[  107.986000] audio ch0: unlock
<4>[  107.986000] audio ch0: lock
<4>[  108.490000] audio ch0: unlock
<4>[  108.490000] audio ch0: lock
<4>[  108.537000] audio ch0: unlock
<4>[  108.562000] audio ch0: lock
<4>[  108.562000] audio ch0: tsm fail
<4>[  108.562000] audio ch0: pts error 0 PTS 0xef56c5e4, STC 0xef56de0e, type 1
<4>[  108.586000] audio ch0: tsm fail
<4>[  108.586000] audio ch0: pts error 0 PTS 0xef56ce54, STC 0xef56e662, type 1
<4>[  108.610000] audio ch0: tsm fail
<4>[  108.610000] audio ch0: pts error 0 PTS 0xef56d6c4, STC 0xef56eed0, type 1
<4>[  108.657000] audio ch0: unlock
<4>[  108.703000] VIDEO0: first pts 0xef57ab26
<4>[  108.705000] audio ch0: lock
<4>[  108.706000] audio ch0: tsm fail
<4>[  108.706000] audio ch0: pts error 0 PTS 0xef56e7a4, STC 0xef5710aa, type 1
<4>[  108.729000] audio ch0: tsm fail
<4>[  108.730000] audio ch0: pts error 0 PTS 0xef56f014, STC 0xef5718fc, type 1
<4>[  108.753000] audio ch0: tsm fail
<4>[  108.754000] audio ch0: pts error 0 PTS 0xef56f884, STC 0xef57216e, type 1
<4>[  108.825000] audio ch0: unlock
<4>[  108.849000] audio ch0: lock
<4>[  108.853000] VIDEO0: enable tsm
<4>[  108.970000] audio ch0: unlock
<4>[  108.970000] audio ch0: lock
<4>[  109.114000] audio ch0: unlock
<4>[  109.114000] audio ch0: lock
<4>[  109.210000] audio ch0: unlock
<4>[  109.210000] audio ch0: lock
<4>[  109.257000] audio ch0: unlock
<4>[  109.258000] audio ch0: lock
<4>[  109.377000] audio ch0: unlock
<4>[  109.402000] audio ch0: lock
<4>[  109.594000] audio ch0: unlock
<4>[  109.594000] audio ch0: lock
<4>[  109.617000] audio ch0: unlock
<4>[  109.619000] audio ch0: lock
<4>[  109.666000] audio ch0: unlock
<4>[  109.714000] audio ch0: lock
<4>[  109.810000] audio ch0: unlock
<4>[  109.810000] audio ch0: lock
<4>[  110.050000] audio ch0: unlock
<4>[  110.050000] audio ch0: lock
<4>[  110.073000] audio ch0: unlock
<4>[  110.097000] audio ch0: lock
<4>[  110.242000] audio ch0: unlock
<4>[  110.243000] audio ch0: lock
<4>[  110.266000] audio ch0: unlock
<4>[  110.266000] audio ch0: lock
<4>[  110.482000] audio ch0: unlock
<4>[  110.483000] audio ch0: lock
<4>[  110.530000] audio ch0: unlock
<4>[  110.602000] audio ch0: lock
<4>[  110.698000] audio ch0: unlock
<4>[  110.722000] audio ch0: lock
<4>[  110.746000] audio ch0: unlock
<4>[  110.770000] audio ch0: lock
<4>[  110.818000] audio ch0: unlock
<4>[  110.842000] audio ch0: lock
<4>[  111.538000] audio ch0: unlock
<4>[  111.539000] audio ch0: lock
<4>[  111.778000] audio ch0: unlock
<4>[  111.779000] audio ch0: lock
<4>[  111.802000] audio ch0: unlock
<4>[  111.802000] audio ch0: lock
<4>[  111.826000] audio ch0: unlock
<4>[  111.924000] audio ch0: lock
<4>[  112.114000] audio ch0: unlock
<4>[  112.114000] audio ch0: lock
<4>[  112.138000] audio ch0: unlock
<4>[  112.186000] audio ch0: lock
<4>[  112.402000] audio ch0: unlock
<4>[  112.402000] audio ch0: lock
<4>[  112.522000] audio ch0: unlock
<4>[  112.522000] audio ch0: lock
<4>[  112.738000] audio ch0: unlock
<4>[  112.738000] audio ch0: lock
<4>[  112.858000] audio ch0: unlock
<4>[  112.858000] audio ch0: lock
<4>[  112.882000] audio ch0: unlock
<4>[  112.882000] audio ch0: lock
<4>[  112.954000] audio ch0: unlock
<4>[  112.954000] audio ch0: lock
<4>[  112.978000] audio ch0: unlock
<4>[  113.002000] audio ch0: lock
<4>[  113.194000] audio ch0: unlock
<4>[  113.194000] audio ch0: lock
<4>[  113.266000] audio ch0: unlock
<4>[  113.290000] audio ch0: lock
<4>[  113.386000] audio ch0: unlock
<4>[  113.386000] audio ch0: lock
<4>[  113.434000] audio ch0: unlock
<4>[  113.434000] audio ch0: lock
<4>[  113.530000] audio ch0: unlock
<4>[  113.530000] audio ch0: lock
<4>[  113.554000] audio ch0: unlock
<4>[  113.652000] audio ch0: lock
<4>[  113.722000] audio ch0: unlock
<4>[  113.795000] audio ch0: lock
<4>[  113.795000] bcm_audio_decoder_tsm_fail_isr: 22 callbacks suppressed
<4>[  113.796000] audio ch0: tsm fail
<4>[  113.796000] audio ch0: pts error 0 PTS 0xef5dd384, STC 0xef5e0e20, type 1
<4>[  113.842000] audio ch0: unlock
<4>[  113.866000] audio ch0: lock
<4>[  114.058000] audio ch0: unlock
<4>[  114.082000] audio ch0: lock
<4>[  114.082000] audio ch0: tsm fail
<4>[  114.083000] audio ch0: pts error 0 PTS 0xef5e5a84, STC 0xef5e72ca, type 1
<4>[  114.130000] audio ch0: tsm fail
<4>[  114.130000] audio ch0: pts error 0 PTS 0xef5e6b64, STC 0xef5e839a, type 1
<4>[  114.154000] audio ch0: unlock
<4>[  114.178000] audio ch0: lock
<4>[  114.322000] audio ch0: unlock
<4>[  114.322000] audio ch0: lock
<4>[  114.442000] audio ch0: unlock
<4>[  114.442000] audio ch0: lock
<4>[  114.682000] audio ch0: unlock
<4>[  114.682000] audio ch0: lock
<4>[  114.706000] audio ch0: unlock
<4>[  114.706000] audio ch0: lock
<4>[  114.850000] audio ch0: unlock
<4>[  114.850000] audio ch0: lock
<4>[  115.066000] audio ch0: unlock
<4>[  115.066000] audio ch0: lock
<4>[  115.113000] audio ch0: unlock
<4>[  115.138000] audio ch0: lock
<4>[  115.138000] audio ch0: tsm fail
<4>[  115.138000] audio ch0: pts error 0 PTS 0xef5fcdc4, STC 0xef5fe5f2, type 1
<4>[  115.258000] audio ch0: unlock
<4>[  115.258000] audio ch0: lock
<4>[  115.474000] audio ch0: unlock
<4>[  115.474000] audio ch0: lock
<4>[  115.497000] audio ch0: unlock
<4>[  115.498000] audio ch0: lock
<4>[  115.546000] audio ch0: unlock
<4>[  115.546000] audio ch0: lock
<4>[  115.570000] audio ch0: unlock
<4>[  115.594000] audio ch0: lock
<4>[  132.442000] stop PCR0 on dmx 0 pid:1cc1
<4>[  132.443000] stop VIDEO0 on dmx 0 pid:1cc1
<4>[  132.444000] VIDEO0: stop decode
<4>[  132.444000] audio ch0: decoder stop
<4>[  132.465000] stop AUDIO0 on dmx 0 pid:1cc2
<4>[  132.465000] audio ch0: xpt stop
<4>[  132.465000] sync0 1fff no decoder left in sync handling so disable
<4>[  132.466000] sync0: was last pcroffset0 user so free it
<4>[  132.543000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  132.623000] set current avs auto aspect to 16:9
<4>[  132.623000] set sb to 3(1)
<3>[  280.066000] bcm4506: bcm_habcmd: cmd not acked 18 98
<3>[  285.445000] bcm4506: bcm_habcmd: cmd not acked 18 98
<3>[  315.029000] bcm4506: bcm_habcmd: cmd not acked 18 98
<3>[  316.192000] bcm4506: bcm_habcmd: cmd not acked 18 98
<3>[  317.324000] bcm4506: bcm_habcmd: cmd not acked 18 98
<3>[  423.898000] bcm4506: bcm_habcmd: cmd not acked 18 98
<6>[  436.113000] bcm4506: channel 0 is sleeping now
<6>[  437.301000] bcm4506: channel 0 is in normal mode now
<4>[  437.566000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  437.644000] set current avs auto aspect to 16:9
<4>[  437.644000] set sb to 3(1)
<4>[  438.498000] start PCR0 on dmx 0 pid:17d5 index 6
<4>[  438.499000] start AUDIO0 on dmx 0 pid:17d6 index 7
<4>[  438.499000] audio ch0: xpt start
<4>[  438.500000] sync0 is off so we enable it
<4>[  438.500000] sync0: allocated pcroffset 0
<4>[  438.501000] sync0: demux-index 0 pcr pid 17d5
<4>[  438.501000] sync0: using 6 as pcr pidchannel
<4>[  438.502000] audio ch0: MPEG
<4>[  438.502000] audio ch0: decoder start
<4>[  438.503000] audio ch0: video delay 0 (0 ms)
<4>[  438.503000] VIDEO0: total delay: 0 (0 ms)
<4>[  438.506000] start VIDEO0 on dmx 0 pid:17d5 index 6
<4>[  438.507000] VIDEO0: total delay: 0 (0 ms)
<4>[  438.512000] VIDEO0: start decode
<4>[  438.586000] audio ch0: first pts 0x1b13f97a4, stc 0x1b13f845e, pcr valid
<4>[  438.608000] audio ch0: lock
<4>[  438.608000] audio ch0: sample rate changed isr (48000)
<4>[  438.686000] audio ch0: status ready isr
<4>[  439.624000] VIDEO0: first pts 0x1b141411e
<4>[  439.624000] VIDEO0: resolution changed (720 576)
<4>[  439.775000] VIDEO0: enable tsm
<4>[  440.591000] stop PCR0 on dmx 0 pid:17d5
<4>[  440.591000] stop VIDEO0 on dmx 0 pid:17d5
<4>[  440.592000] VIDEO0: stop decode
<4>[  440.593000] audio ch0: decoder stop
<4>[  440.613000] stop AUDIO0 on dmx 0 pid:17d6
<4>[  440.613000] audio ch0: xpt stop
<4>[  440.613000] sync0 1fff no decoder left in sync handling so disable
<4>[  440.614000] sync0: was last pcroffset0 user so free it
<4>[  441.821000] start PCR0 on dmx 0 pid:add index 4
<4>[  441.822000] start AUDIO0 on dmx 0 pid:ade index 7
<4>[  441.823000] audio ch0: xpt start
<4>[  441.823000] sync0 is off so we enable it
<4>[  441.824000] sync0: allocated pcroffset 0
<4>[  441.824000] sync0: demux-index 0 pcr pid add
<4>[  441.825000] sync0: using 4 as pcr pidchannel
<4>[  441.826000] audio ch0: MPEG
<4>[  441.826000] audio ch0: decoder start
<4>[  441.826000] audio ch0: video delay 0 (0 ms)
<4>[  441.827000] VIDEO0: total delay: 0 (0 ms)
<4>[  441.829000] VIDEO0: set streamtype!
<4>[  441.829000] ->      set H264
<4>[  441.830000] ->      sw rave disabled!
<4>[  441.830000] audio ch0 delay 18000 (200 ms)
<4>[  441.831000] VIDEO0: total delay: 18000 (200 ms)
<4>[  441.831000] start VIDEO0 on dmx 0 pid:add index 4
<4>[  441.832000] VIDEO0: total delay: 18000 (200 ms)
<4>[  441.837000] VIDEO0: start decode
<4>[  442.094000] audio ch0: first pts 0x68acb20c, stc 0x11cc97422, pcr valid
<4>[  446.109000] stop PCR0 on dmx 0 pid:add
<4>[  446.110000] stop VIDEO0 on dmx 0 pid:add
<4>[  446.111000] VIDEO0 use saved pts 0x1b1423e3e (ret 0)
<4>[  446.112000] VIDEO0: stop decode
<4>[  446.112000] audio ch0: use saved pts 0x68acb20c (0x68acb20c) (ret 1)
<4>[  446.113000] audio ch0: decoder stop
<4>[  446.118000] stop AUDIO0 on dmx 0 pid:ade
<4>[  446.118000] audio ch0: xpt stop
<4>[  446.118000] sync0 1fff no decoder left in sync handling so disable
<4>[  446.119000] sync0: was last pcroffset0 user so free it
<4>[  446.797000] start PCR0 on dmx 0 pid:17df index 4
<4>[  446.798000] start AUDIO0 on dmx 0 pid:17e0 index 7
<4>[  446.799000] audio ch0: xpt start
<4>[  446.799000] sync0 is off so we enable it
<4>[  446.800000] sync0: allocated pcroffset 0
<4>[  446.800000] sync0: demux-index 0 pcr pid 17df
<4>[  446.801000] sync0: using 4 as pcr pidchannel
<4>[  446.801000] audio ch0: MPEG
<4>[  446.802000] audio ch0: decoder start
<4>[  446.802000] audio ch0 delay 18000 (200 ms)
<4>[  446.803000] VIDEO0: total delay: 18000 (200 ms)
<4>[  446.805000] VIDEO0: set streamtype!
<4>[  446.805000] ->      set MPEG2
<4>[  446.806000] ->      sw rave disabled!
<4>[  446.806000] audio ch0: video delay 0 (0 ms)
<4>[  446.807000] VIDEO0: total delay: 0 (0 ms)
<4>[  446.807000] start VIDEO0 on dmx 0 pid:17df index 4
<4>[  446.808000] VIDEO0: total delay: 0 (0 ms)
<4>[  446.813000] VIDEO0: start decode
<4>[  446.913000] audio ch0: first pts 0x33b60354, stc 0x33b5e90a, pcr valid
<4>[  446.936000] audio ch0: lock
<4>[  446.936000] audio ch0: sample rate changed isr (48000)
<4>[  446.991000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  447.033000] audio ch0: status ready isr
<4>[  447.064000] set current avs auto aspect to 16:9
<4>[  447.064000] set sb to 3(1)
<4>[  448.204000] VIDEO0: first pts 0x33b8012e
<4>[  448.354000] VIDEO0: enable tsm
<4>[  454.021000] stop PCR0 on dmx 0 pid:17df
<4>[  454.022000] stop VIDEO0 on dmx 0 pid:17df
<4>[  454.023000] VIDEO0: stop decode
<4>[  454.023000] audio ch0: decoder stop
<4>[  454.044000] stop AUDIO0 on dmx 0 pid:17e0
<4>[  454.044000] audio ch0: xpt stop
<4>[  454.045000] sync0 1fff no decoder left in sync handling so disable
<4>[  454.045000] sync0: was last pcroffset0 user so free it
<4>[  456.702000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  456.764000] set current avs auto aspect to 16:9
<4>[  456.764000] set sb to 3(1)
<4>[  470.896000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  470.964000] set current avs auto aspect to 16:9
<4>[  470.964000] set sb to 3(1)
<4>[  471.185000] start PCR0 on dmx 0 pid:19b0 index 4
<4>[  471.185000] start AUDIO0 on dmx 0 pid:19b1 index 7
<4>[  471.186000] audio ch0: xpt start
<4>[  471.186000] sync0 is off so we enable it
<4>[  471.187000] sync0: allocated pcroffset 0
<4>[  471.187000] sync0: demux-index 0 pcr pid 19b0
<4>[  471.188000] sync0: using 4 as pcr pidchannel
<4>[  471.188000] audio ch0: MPEG
<4>[  471.189000] audio ch0: decoder start
<4>[  471.189000] audio ch0: video delay 0 (0 ms)
<4>[  471.190000] VIDEO0: total delay: 0 (0 ms)
<4>[  471.192000] start VIDEO0 on dmx 0 pid:19b0 index 4
<4>[  471.193000] VIDEO0: total delay: 0 (0 ms)
<4>[  471.198000] VIDEO0: start decode
<4>[  471.752000] audio ch0: first pts 0x13c881374, stc 0xf173e8c4, pcr valid
<4>[  476.581000] stop PCR0 on dmx 0 pid:19b0
<4>[  476.582000] stop VIDEO0 on dmx 0 pid:19b0
<4>[  476.583000] VIDEO0 use saved pts 0x33bfa3de (ret 0)
<4>[  476.584000] VIDEO0: stop decode
<4>[  476.585000] audio ch0: use saved pts 0x13c881374 (0x13c881374) (ret 1)
<4>[  476.586000] audio ch0: decoder stop
<4>[  476.592000] stop AUDIO0 on dmx 0 pid:19b1
<4>[  476.592000] audio ch0: xpt stop
<4>[  476.592000] sync0 1fff no decoder left in sync handling so disable
<4>[  476.593000] sync0: was last pcroffset0 user so free it
<4>[  477.650000] start PCR0 on dmx 0 pid:19b0 index 3
<4>[  477.651000] start AUDIO0 on dmx 0 pid:19b1 index 4
<4>[  477.651000] audio ch0: xpt start
<4>[  477.652000] sync0 is off so we enable it
<4>[  477.652000] sync0: allocated pcroffset 0
<4>[  477.653000] sync0: demux-index 0 pcr pid 19b0
<4>[  477.653000] sync0: using 3 as pcr pidchannel
<4>[  477.654000] audio ch0: MPEG
<4>[  477.654000] audio ch0: decoder start
<4>[  477.654000] audio ch0: video delay 0 (0 ms)
<4>[  477.655000] VIDEO0: total delay: 0 (0 ms)
<4>[  477.658000] start VIDEO0 on dmx 0 pid:19b0 index 3
<4>[  477.659000] VIDEO0: total delay: 0 (0 ms)
<4>[  477.664000] VIDEO0: start decode
<4>[  477.828000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  477.904000] set current avs auto aspect to 16:9
<4>[  477.904000] set sb to 3(1)
<4>[  478.368000] audio ch0: first pts 0x6e5a6428, stc 0xf17cfea4, pcr valid
<4>[  480.633000] stop PCR0 on dmx 0 pid:19b0
<4>[  480.634000] stop VIDEO0 on dmx 0 pid:19b0
<4>[  480.634000] VIDEO0 use saved pts 0x33bfa3de (ret 0)
<4>[  480.635000] VIDEO0: stop decode
<4>[  480.636000] audio ch0: use saved pts 0x6e5a6428 (0x6e5a6428) (ret 1)
<4>[  480.637000] audio ch0: decoder stop
<4>[  480.641000] stop AUDIO0 on dmx 0 pid:19b1
<4>[  480.641000] audio ch0: xpt stop
<4>[  480.641000] sync0 1fff no decoder left in sync handling so disable
<4>[  480.642000] sync0: was last pcroffset0 user so free it
<4>[  481.405000] start PCR0 on dmx 0 pid:19d3 index 4
<4>[  481.406000] start AUDIO0 on dmx 0 pid:19d4 index 7
<4>[  481.407000] audio ch0: xpt start
<4>[  481.407000] sync0 is off so we enable it
<4>[  481.407000] sync0: allocated pcroffset 0
<4>[  481.408000] sync0: demux-index 0 pcr pid 19d3
<4>[  481.408000] sync0: using 4 as pcr pidchannel
<4>[  481.409000] audio ch0: MPEG
<4>[  481.409000] audio ch0: decoder start
<4>[  481.410000] audio ch0: video delay 0 (0 ms)
<4>[  481.410000] VIDEO0: total delay: 0 (0 ms)
<4>[  481.413000] start VIDEO0 on dmx 0 pid:19d3 index 4
<4>[  481.414000] VIDEO0: total delay: 0 (0 ms)
<4>[  481.419000] VIDEO0: start decode
<4>[  481.535000] audio ch0: first pts 0xf1817f78, stc 0xf18158ae, pcr valid
<4>[  481.558000] audio ch0: lock
<4>[  481.559000] audio ch0: sample rate changed isr (48000)
<4>[  481.690000] audio ch0: status ready isr
<4>[  482.424000] VIDEO0: first pts 0xf182e640
<4>[  482.424000] VIDEO0: resolution changed (704 576)
<4>[  482.575000] VIDEO0: enable tsm
<4>[  483.788000] stop PCR0 on dmx 0 pid:19d3
<4>[  483.788000] stop VIDEO0 on dmx 0 pid:19d3
<4>[  483.790000] VIDEO0: stop decode
<4>[  483.790000] audio ch0: decoder stop
<4>[  483.811000] stop AUDIO0 on dmx 0 pid:19d4
<4>[  483.811000] audio ch0: xpt stop
<4>[  483.811000] sync0 1fff no decoder left in sync handling so disable
<4>[  483.812000] sync0: was last pcroffset0 user so free it
<4>[  484.429000] start PCR0 on dmx 0 pid:19b0 index 2
<4>[  484.429000] start AUDIO0 on dmx 0 pid:19b1 index 3
<4>[  484.430000] audio ch0: xpt start
<4>[  484.430000] sync0 is off so we enable it
<4>[  484.431000] sync0: allocated pcroffset 0
<4>[  484.431000] sync0: demux-index 0 pcr pid 19b0
<4>[  484.432000] sync0: using 2 as pcr pidchannel
<4>[  484.433000] audio ch0: MPEG
<4>[  484.433000] audio ch0: decoder start
<4>[  484.434000] audio ch0: video delay 0 (0 ms)
<4>[  484.434000] VIDEO0: total delay: 0 (0 ms)
<4>[  484.437000] start VIDEO0 on dmx 0 pid:19b0 index 2
<4>[  484.438000] VIDEO0: total delay: 0 (0 ms)
<4>[  484.443000] VIDEO0: start decode
<4>[  484.560000] audio ch0: first pts 0xf185a698, stc 0xf1857fb8, pcr valid
<4>[  484.584000] audio ch0: lock
<4>[  484.584000] audio ch0: sample rate changed isr (48000)
<4>[  484.716000] audio ch0: status ready isr
<4>[  486.084000] VIDEO0: first pts 0xf187c9d0
<4>[  486.234000] VIDEO0: enable tsm
<4>[  489.719000] stop PCR0 on dmx 0 pid:19b0
<4>[  489.719000] stop VIDEO0 on dmx 0 pid:19b0
<4>[  489.721000] VIDEO0: stop decode
<4>[  489.721000] audio ch0: decoder stop
<4>[  489.742000] stop AUDIO0 on dmx 0 pid:19b1
<4>[  489.742000] audio ch0: xpt stop
<4>[  489.742000] sync0 1fff no decoder left in sync handling so disable
<4>[  489.743000] sync0: was last pcroffset0 user so free it
<4>[  490.395000] start PCR0 on dmx 0 pid:19d3 index 2
<4>[  490.396000] start AUDIO0 on dmx 0 pid:19d4 index 3
<4>[  490.397000] audio ch0: xpt start
<4>[  490.397000] sync0 is off so we enable it
<4>[  490.398000] sync0: allocated pcroffset 0
<4>[  490.398000] sync0: demux-index 0 pcr pid 19d3
<4>[  490.399000] sync0: using 2 as pcr pidchannel
<4>[  490.399000] audio ch0: MPEG
<4>[  490.400000] audio ch0: decoder start
<4>[  490.400000] audio ch0: video delay 0 (0 ms)
<4>[  490.401000] VIDEO0: total delay: 0 (0 ms)
<4>[  490.403000] start VIDEO0 on dmx 0 pid:19d3 index 2
<4>[  490.404000] VIDEO0: total delay: 0 (0 ms)
<4>[  490.409000] VIDEO0: start decode
<4>[  490.463000] audio ch0: first pts 0xf18dc238, stc 0xf18d9b6a, pcr valid
<4>[  490.487000] audio ch0: lock
<4>[  490.487000] audio ch0: sample rate changed isr (48000)
<4>[  490.619000] audio ch0: status ready isr
<4>[  491.964000] VIDEO0: first pts 0xf18ff920
<4>[  492.115000] VIDEO0: enable tsm
<4>[  496.555000] stop PCR0 on dmx 0 pid:19d3
<4>[  496.555000] stop VIDEO0 on dmx 0 pid:19d3
<4>[  496.557000] VIDEO0: stop decode
<4>[  496.557000] audio ch0: decoder stop
<4>[  496.578000] stop AUDIO0 on dmx 0 pid:19d4
<4>[  496.578000] audio ch0: xpt stop
<4>[  496.578000] sync0 1fff no decoder left in sync handling so disable
<4>[  496.579000] sync0: was last pcroffset0 user so free it
<4>[  497.224000] start PCR0 on dmx 0 pid:19a1 index 2
<4>[  497.225000] start AUDIO0 on dmx 0 pid:19a2 index 3
<4>[  497.225000] audio ch0: xpt start
<4>[  497.226000] sync0 is off so we enable it
<4>[  497.226000] sync0: allocated pcroffset 0
<4>[  497.227000] sync0: demux-index 0 pcr pid 19a1
<4>[  497.227000] sync0: using 2 as pcr pidchannel
<4>[  497.228000] audio ch0: MPEG
<4>[  497.228000] audio ch0: decoder start
<4>[  497.228000] audio ch0: video delay 0 (0 ms)
<4>[  497.229000] VIDEO0: total delay: 0 (0 ms)
<4>[  497.231000] start VIDEO0 on dmx 0 pid:19a1 index 2
<4>[  497.232000] VIDEO0: total delay: 0 (0 ms)
<4>[  497.237000] VIDEO0: start decode
<4>[  497.239000] audio ch0: first pts 0xf187d7ae, stc 0x244c458, pcr invalid
<4>[  497.261000] audio ch0: lock
<4>[  497.261000] audio ch0: sample rate changed isr (48000)
<4>[  497.262000] audio ch0: tsm fail
<4>[  497.262000] audio ch0: pts error 0 PTS 0xf187d7ae, STC 0xf187ca60, type 0
<4>[  497.369000] audio ch0: status ready isr
<4>[  498.033000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  498.104000] set current avs auto aspect to 16:9
<4>[  498.104000] set sb to 3(1)
<4>[  498.904000] VIDEO0: first pts 0xf18aa968
<4>[  499.055000] VIDEO0: enable tsm
<4>[  499.995000] stop PCR0 on dmx 0 pid:19a1
<4>[  499.996000] stop VIDEO0 on dmx 0 pid:19a1
<4>[  499.997000] VIDEO0: stop decode
<4>[  499.998000] audio ch0: decoder stop
<4>[  500.018000] stop AUDIO0 on dmx 0 pid:19a2
<4>[  500.018000] audio ch0: xpt stop
<4>[  500.018000] sync0 1fff no decoder left in sync handling so disable
<4>[  500.019000] sync0: was last pcroffset0 user so free it
<4>[  500.686000] start PCR0 on dmx 0 pid:1cc1 index 2
<4>[  500.687000] start AUDIO0 on dmx 0 pid:1cc2 index 3
<4>[  500.687000] audio ch0: xpt start
<4>[  500.688000] sync0 is off so we enable it
<4>[  500.688000] sync0: allocated pcroffset 0
<4>[  500.689000] sync0: demux-index 0 pcr pid 1cc1
<4>[  500.689000] sync0: using 2 as pcr pidchannel
<4>[  500.690000] audio ch0: MPEG
<4>[  500.690000] audio ch0: decoder start
<4>[  500.690000] audio ch0: video delay 0 (0 ms)
<4>[  500.691000] VIDEO0: total delay: 0 (0 ms)
<4>[  500.693000] start VIDEO0 on dmx 0 pid:1cc1 index 2
<4>[  500.694000] VIDEO0: total delay: 0 (0 ms)
<4>[  500.699000] VIDEO0: start decode
<4>[  500.760000] audio ch0: first pts 0xf1718db4, stc 0xf171779e, pcr valid
<4>[  500.782000] audio ch0: lock
<4>[  500.783000] audio ch0: sample rate changed isr (48000)
<4>[  500.868000] audio ch0: status ready isr
<4>[  501.104000] VIDEO0: first pts 0xf1728c46
<4>[  501.254000] VIDEO0: enable tsm
<3>[  506.412000] rc: unknown key code 47
<3>[  506.463000] rc: unknown key code 47
<4>[  508.993000] stop PCR0 on dmx 0 pid:1cc1
<4>[  508.993000] stop VIDEO0 on dmx 0 pid:1cc1
<4>[  508.995000] VIDEO0: stop decode
<4>[  508.995000] audio ch0: decoder stop
<4>[  509.015000] stop AUDIO0 on dmx 0 pid:1cc2
<4>[  509.015000] audio ch0: xpt stop
<4>[  509.015000] sync0 1fff no decoder left in sync handling so disable
<4>[  509.016000] sync0: was last pcroffset0 user so free it
<4>[  509.281000] start PCR0 on dmx 0 pid:1a0f index 4
<4>[  509.282000] start AUDIO0 on dmx 0 pid:1a10 index 5
<4>[  509.282000] audio ch0: xpt start
<4>[  509.283000] sync0 is off so we enable it
<4>[  509.283000] sync0: allocated pcroffset 0
<4>[  509.284000] sync0: demux-index 0 pcr pid 1a0f
<4>[  509.284000] sync0: using 4 as pcr pidchannel
<4>[  509.285000] audio ch0: MPEG
<4>[  509.285000] audio ch0: decoder start
<4>[  509.286000] audio ch0: video delay 0 (0 ms)
<4>[  509.286000] VIDEO0: total delay: 0 (0 ms)
<4>[  509.288000] VIDEO0: set streamtype!
<4>[  509.288000] ->      set H264
<4>[  509.289000] ->      sw rave disabled!
<4>[  509.289000] audio ch0 delay 18000 (200 ms)
<4>[  509.290000] VIDEO0: total delay: 18000 (200 ms)
<4>[  509.291000] start VIDEO0 on dmx 0 pid:1a0f index 4
<4>[  509.291000] VIDEO0: total delay: 18000 (200 ms)
<4>[  509.297000] VIDEO0: start decode
<4>[  509.558000] audio ch0: first pts 0x1bf37a402, stc 0xef9b92a2, pcr valid
<4>[  509.581000] audio ch0: lock
<4>[  509.582000] audio ch0: sample rate changed isr (48000)
<4>[  509.582000] audio ch0: tsm fail
<4>[  509.582000] audio ch0: pts error 0 PTS 0xbf37a402, STC 0xef9b9b62, type 0
<4>[  509.605000] audio ch0: tsm fail
<4>[  509.605000] audio ch0: pts error 0 PTS 0xbf37ac72, STC 0xef9ba368, type 1
<4>[  509.630000] audio ch0: tsm fail
<4>[  509.630000] audio ch0: pts error 0 PTS 0xbf37b4e2, STC 0xef9bac0c, type 1
<4>[  509.653000] audio ch0: tsm fail
<4>[  509.654000] audio ch0: pts error 0 PTS 0xbf37bd52, STC 0xef9bb452, type 1
<4>[  509.677000] audio ch0: tsm fail
<4>[  509.860000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  509.924000] set current avs auto aspect to 16:9
<4>[  509.924000] set sb to 3(1)
<4>[  510.864000] VIDEO0: first pts 0xef9dd9f0
<4>[  511.015000] VIDEO0: enable tsm
<4>[  525.981000] stop PCR0 on dmx 0 pid:1a0f
<4>[  525.981000] stop VIDEO0 on dmx 0 pid:1a0f
<4>[  525.983000] VIDEO0: stop decode
<4>[  525.983000] audio ch0: decoder stop
<4>[  526.004000] stop AUDIO0 on dmx 0 pid:1a10
<4>[  526.004000] audio ch0: xpt stop
<4>[  526.005000] sync0 1fff no decoder left in sync handling so disable
<4>[  526.005000] sync0: was last pcroffset0 user so free it
<4>[  526.031000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  526.104000] set current avs auto aspect to 16:9
<4>[  526.105000] set sb to 3(1)
<4>[  530.789000] bcm4506: invalid FEC 9 for DVB-S2 QPSK... force AUTO
<4>[  577.032000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  577.104000] set current avs auto aspect to 16:9
<4>[  577.105000] set sb to 3(1)
<4>[  577.250000] start PCR0 on dmx 0 pid:76c index 4
<4>[  577.251000] start AUDIO0 on dmx 0 pid:76d index 7
<4>[  577.252000] audio ch0: xpt start
<4>[  577.252000] sync0 is off so we enable it
<4>[  577.253000] sync0: allocated pcroffset 0
<4>[  577.253000] sync0: demux-index 0 pcr pid 76c
<4>[  577.254000] sync0: using 4 as pcr pidchannel
<4>[  577.254000] audio ch0: MPEG
<4>[  577.255000] audio ch0: decoder start
<4>[  577.255000] audio ch0 delay 18000 (200 ms)
<4>[  577.255000] VIDEO0: total delay: 18000 (200 ms)
<4>[  577.258000] start VIDEO0 on dmx 0 pid:76c index 4
<4>[  577.259000] VIDEO0: total delay: 18000 (200 ms)
<4>[  577.264000] VIDEO0: start decode
<4>[  577.433000] rtc set to 1540664691
<4>[  577.435000] rtc set to valid now
<4>[  577.648000] audio ch0: first pts 0x3b0e5cc8, stc 0x6ca3dbf2, pcr valid
<3>[  588.844000] rc: unknown key code 47
<3>[  588.894000] rc: unknown key code 47
<4>[  590.398000] stop PCR0 on dmx 0 pid:76c
<4>[  590.399000] stop VIDEO0 on dmx 0 pid:76c
<4>[  590.400000] bcm_mpeg_decoder_get_pts: 10 callbacks suppressed
<4>[  590.400000] VIDEO0 use saved pts 0xefa6f850 (ret 0)
<4>[  590.401000] VIDEO0: stop decode
<4>[  590.402000] audio ch0: use saved pts 0x3b0e5cc8 (0x3b0e5cc8) (ret 1)
<4>[  590.403000] audio ch0: decoder stop
<4>[  590.408000] stop AUDIO0 on dmx 0 pid:76d
<4>[  590.408000] audio ch0: xpt stop
<4>[  590.408000] sync0 1fff no decoder left in sync handling so disable
<4>[  590.409000] sync0: was last pcroffset0 user so free it
<4>[  590.483000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  590.566000] set current avs auto aspect to 16:9
<4>[  590.567000] set sb to 3(1)
<6>[  621.601000] bcm4506: channel 0 is sleeping now
<6>[  626.023000] bcm4506: channel 0 is in normal mode now
<4>[  626.218000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  626.284000] set current avs auto aspect to 16:9
<4>[  626.285000] set sb to 3(1)
<4>[  627.342000] start PCR0 on dmx 0 pid:1069 index 6
<4>[  627.343000] start AUDIO0 on dmx 0 pid:106c index 7
<4>[  627.344000] audio ch0: xpt start
<4>[  627.344000] sync0 is off so we enable it
<4>[  627.345000] sync0: allocated pcroffset 0
<4>[  627.345000] sync0: demux-index 0 pcr pid 1069
<4>[  627.346000] sync0: using 6 as pcr pidchannel
<4>[  627.346000] audio ch0: MPEG
<4>[  627.346000] audio ch0: decoder start
<4>[  627.347000] audio ch0 delay 18000 (200 ms)
<4>[  627.347000] VIDEO0: total delay: 18000 (200 ms)
<4>[  627.350000] start VIDEO0 on dmx 0 pid:1069 index 6
<4>[  627.351000] VIDEO0: total delay: 18000 (200 ms)
<4>[  627.356000] VIDEO0: start decode
<4>[  627.429000] audio ch0: first pts 0xbd03616e, stc 0xbd03367a, pcr valid
<4>[  627.451000] audio ch0: lock
<4>[  627.451000] audio ch0: sample rate changed isr (48000)
<4>[  627.797000] audio ch0: status ready isr
<4>[  628.004000] VIDEO0: first pts 0xbd04ff48
<4>[  628.004000] VIDEO0: resolution changed (1920 1080)
<4>[  628.155000] VIDEO0: enable tsm
<4>[  646.398000] stop PCR0 on dmx 0 pid:1069
<4>[  646.398000] stop VIDEO0 on dmx 0 pid:1069
<4>[  646.402000] VIDEO0: stop decode
<4>[  646.403000] audio ch0: decoder stop
<4>[  646.423000] stop AUDIO0 on dmx 0 pid:106c
<4>[  646.423000] audio ch0: xpt stop
<4>[  646.423000] sync0 1fff no decoder left in sync handling so disable
<4>[  646.424000] sync0: was last pcroffset0 user so free it
<4>[  646.655000] start PCR0 on dmx 0 pid:107d index 1
<4>[  646.656000] start AUDIO0 on dmx 0 pid:107e index 4
<4>[  646.656000] audio ch0: xpt start
<4>[  646.657000] sync0 is off so we enable it
<4>[  646.657000] sync0: allocated pcroffset 0
<4>[  646.658000] sync0: demux-index 0 pcr pid 107d
<4>[  646.658000] sync0: using 1 as pcr pidchannel
<4>[  646.659000] audio ch0: MPEG
<4>[  646.659000] audio ch0: decoder start
<4>[  646.660000] audio ch0 delay 18000 (200 ms)
<4>[  646.660000] VIDEO0: total delay: 18000 (200 ms)
<4>[  6

VU PLUS ULTIMO:Dreambox 820 hd:Spark 7111


Re: Howto build unofficial pli for your unsupported receiver #2588 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 28 October 2018 - 08:55

New RaspberryPi images for all RPi models on: http://www.mediafire...q4d9/pli-extras

 

- rpihddevice library

- dvbsoftware-ca

- e2-procfs

 

Special thanks to our team member: https://github.com/milaebrothers


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2589 challou

  • Member
  • 20 posts

0
Neutral

Posted 28 October 2018 - 11:46

New RaspberryPi images for all RPi models on: http://www.mediafire...q4d9/pli-extras

 

- rpihddevice library

- dvbsoftware-ca

- e2-procfs

 

Special thanks to our team member: https://github.com/milaebrothers

 

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????



Re: Howto build unofficial pli for your unsupported receiver #2590 ramiMAHER

  • Member
  • 9 posts

0
Neutral

Posted 28 October 2018 - 19:50

Is there news about amiko a5???/



Re: Howto build unofficial pli for your unsupported receiver #2591 challou

  • Member
  • 20 posts

0
Neutral

Posted 29 October 2018 - 01:14

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????

 

en also the wifi plugin down work I have this driver for it bad downt work  https://cloud.mail.r...TAdgunsCL/grab/



Re: Howto build unofficial pli for your unsupported receiver #2592 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 29 October 2018 - 07:28

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????

 

 

 

New RaspberryPi images for all RPi models on: http://www.mediafire...q4d9/pli-extras

 

- rpihddevice library

- dvbsoftware-ca

- e2-procfs

 

Special thanks to our team member: https://github.com/milaebrothers

 

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????

 

 

 

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????

 

en also the wifi plugin down work I have this driver for it bad downt work  https://cloud.mail.r...TAdgunsCL/grab/

 

Would you please stop spamming this topic?

 

This kind of behaviour leads you to no answer.


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #2593 challou

  • Member
  • 20 posts

0
Neutral

Posted 29 October 2018 - 13:09

 

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????

 

 

 

New RaspberryPi images for all RPi models on: http://www.mediafire...q4d9/pli-extras

 

- rpihddevice library

- dvbsoftware-ca

- e2-procfs

 

Special thanks to our team member: https://github.com/milaebrothers

 

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????

 

 

 

thanks persian for the image of azbox hd, only the iptv does not work on the service 1 ??????????

 

en also the wifi plugin down work I have this driver for it bad downt work  https://cloud.mail.r...TAdgunsCL/grab/

 

Would you please stop spamming this topic?

 

This kind of behaviour leads you to no answer.

 

ok sorry 



Re: Howto build unofficial pli for your unsupported receiver #2594 tomili

  • Member
  • 11 posts

+1
Neutral

Posted 29 October 2018 - 17:35

Respected zeros installed another OpenPLI 6.2 and inserted plugins there normally works.What could be the problem?

 

 


Edited by tomili, 29 October 2018 - 17:36.

 DREAMBOX DM920 UHD S2X FBC MULTISTREAM OpenPLI 6.2 от ZEROS SSD 240GB

Re: Howto build unofficial pli for your unsupported receiver #2595 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 October 2018 - 20:04

Okay, I'll try this plugin out on the weekend with a clean new image. Are you sure you followed all the requirements and preconditions which are written there on the seasondream forum?


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #2596 tomili

  • Member
  • 11 posts

+1
Neutral

Posted 30 October 2018 - 21:33

Yes, I did as recommended there. I have been crawling with this plugin for a long time, the first such cases
 DREAMBOX DM920 UHD S2X FBC MULTISTREAM OpenPLI 6.2 от ZEROS SSD 240GB

Re: Howto build unofficial pli for your unsupported receiver #2597 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 30 October 2018 - 23:19

Test feed for dm900 and dm920 updated. 2018-10-30
Thanks all involved!

Edited by zeros, 30 October 2018 - 23:22.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #2598 tomili

  • Member
  • 11 posts

+1
Neutral

Posted 31 October 2018 - 17:42

meta-uclan added, test image is on my link ;)

 

I'm uploading new spark and sh4 images on http://www.mediafire...q4d9/pli-extras

not downloaded to the end .... interrupts

Edited by tomili, 31 October 2018 - 17:45.

 DREAMBOX DM920 UHD S2X FBC MULTISTREAM OpenPLI 6.2 от ZEROS SSD 240GB

Re: Howto build unofficial pli for your unsupported receiver #2599 johnny64

  • Member
  • 5 posts

0
Neutral

Posted 2 November 2018 - 07:36

u5pvr, ferguson, image openpli works with remote control, if anyone is interested in giving directions!

Re: Howto build unofficial pli for your unsupported receiver #2600 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 3 November 2018 - 13:02

develop-dm900-03.11.2018-TEST
https://www.online.e...64-53438cc2d822
develop-dm920-03.11.2018-TEST
https://www.online.e...3d-22b4af341ad3

https://github.com/P...commits/develop
Thanks all involved!

P.S. I deleted all old files from server
and I will start with these files some tests, what I promised to do. It should also be OK online Update.


Edited by zeros, 3 November 2018 - 13:03.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz



55 user(s) are reading this topic

0 members, 54 guests, 0 anonymous users


    Bing (1)