Jump to content


Photo

Howto build unofficial pli for your unsupported receiver


  • This topic is locked This topic is locked
2740 replies to this topic

Re: Howto build unofficial pli for your unsupported receiver #1601 bumperbee

  • Senior Member
  • 284 posts

+10
Neutral

Posted 10 July 2018 - 21:41

Hi Beeker, please tell me what’s wrong with my box? Why can’t I install it in a normal way?

Thanks & Best Regards



Re: Howto build unofficial pli for your unsupported receiver #1602 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 10 July 2018 - 21:53

Hi Beeker, please tell me what’s wrong with my box? Why can’t I install it in a normal way?

Thanks & Best Regards

?

You mean, you can't install plugins


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1603 bumperbee

  • Senior Member
  • 284 posts

+10
Neutral

Posted 11 July 2018 - 06:20

To be able to install this image, I have to follow your instruction as follows,

telnet

init 4

enigma2

 

If not it could not be install, it keep on rebooting non-stop. Is there a permanent solution to this?

Besides the above, I also wish to have the following plugins please,

  1. full backup image plugin
  2. Terrestrial scan
  3. Dream explorer

Thanks & Best Regards



Re: Howto build unofficial pli for your unsupported receiver #1604 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 11 July 2018 - 12:08

To be able to install this image, I have to follow your instruction as follows,

telnet

init 4

enigma2

 

If not it could not be install, it keep on rebooting non-stop. Is there a permanent solution to this?

Besides the above, I also wish to have the following plugins please,

  1. full backup image plugin
  2. Terrestrial scan
  3. Dream explorer

Thanks & Best Regards

 

Wait for new image with feed for plugins.

Then you can install backupsuite for full backup.

 

This image was build with a trick, it was build as dm7020hd with machine config of dm7020hdv2.

Why enigma2 crahs, i have no idea yet.

 

Dream explorer is 3-rd party plugins, and Terrestrial scan also, but i'm not sure about that.

 

You have 3th party feed opkg files for dm7020hd and 3-rd party feed for all boxes.

So perhaps you can install 3-rd party plugins at this moment (if feed for dm7020hd exist).

 

With telnet run:

opkg update

And see if 3-rd party feed fails or not.


Edited by Beeker, 11 July 2018 - 12:10.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Howto build unofficial pli for your unsupported receiver #1605 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 11 July 2018 - 12:15

meta-blackbox added:

  • sogno8800hd
  • uniboxhde

meta-ixuss added:

  • ixussone
  • ixusszero

;)


Edited by Persian Prince, 11 July 2018 - 12:15.

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1606 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 11 July 2018 - 12:39

ixussone test image: http://www.mediafire...ne_usb.zip/file


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1607 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 11 July 2018 - 13:12

sogno8800hd test image: http://www.mediafire...hd_usb.zip/file


Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1608 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 11 July 2018 - 14:02

develop-dm7020hd-11.07.2018
https://www.online.e...0d-bcb283a599dd
develop-dm7020hdv2-11.07.2018
https://www.online.e...9d-67d4ea436225

Live feed inside.
bumperbee, for you take the second link (with v2 image)


Edited by zeros, 11 July 2018 - 14:02.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #1609 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 11 July 2018 - 17:00

Just for info, everything OK with my dm7020hd V1

Feed is OK, all asked plugins inside, oscam is by default installed

and ..... everything works great :) 

Waiting for conformation about v2 box.

Attached Files


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Howto build unofficial pli for your unsupported receiver #1610 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 11 July 2018 - 21:41

I've ported the e2procfs for the k2pro on the 3.14.29 kernel now I have some of the proc/stb nodes(some of them are just set to null)

I've loaded the avl6862 drivers and I have /dev/dvb/adapter0/frontend0

for /proc/bus/nim_sockets most of the tools I've tried fails to detect that the avl6862 support muliple standards(dvb-s,dvb-s2 and dvb-t) and instead they identify it as dvb-t frontend, I've tried linkdroid-cnim and create_nimsockets

and they both result in the following:

 

NIM Socket 0:
    Type: DVB-T2
    Name: Availink avl6862
    Has_Outputs: no
    Frontend_Device: 0

Unfortunately I can't test dvb-T2, I can only test dvb-s and dvb-s2 so I wrote the following to the /proc/bus/nim_scokets

 

 

NIM Socket 0:
    Type: DVB-S
    Name: Availink avl6862
    Has_Outputs: no
    Frontend_Device: 0

now enigma2 sees  the tuner as dvb-s and I can use the setup and set the satellite, but the scan doesn't find any channels, when running a scan I get this error in the console

 

 

FE_SET_PROPERTY failed: Bad address

the error is repeated with every frequency it scans.

So what is the cause of this error ? a particular /proc/stb  node missing ? How can I collect more info about this error(enable debuggig ?)

note that the avl6862 driver uses dvb api version 3 (I think) and when running enigma I get this  in the console:

 

DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10

So maybe enigma2 is compiled for dvb api version 5 and this causes it to not being able to communicate correctly with the avl6862 ?

Would appreciate if any of enigma2 experts can help me debug this

 

Thanks



Re: Howto build unofficial pli for your unsupported receiver #1611 bumperbee

  • Senior Member
  • 284 posts

+10
Neutral

Posted 11 July 2018 - 21:46

Hi Beeker & Zeros, thanks very much for all the help you are giving me.

I just try out the new image, after flashing it hangs at the display where it show the Ip address of the box but without the stop wording.



Re: Howto build unofficial pli for your unsupported receiver #1612 ftp21_

  • Senior Member
  • 73 posts

+9
Neutral

Posted 11 July 2018 - 22:01

I've ported the e2procfs for the k2pro on the 3.14.29 kernel now I have some of the proc/stb nodes(some of them are just set to null)

I've loaded the avl6862 drivers and I have /dev/dvb/adapter0/frontend0

for /proc/bus/nim_sockets most of the tools I've tried fails to detect that the avl6862 support muliple standards(dvb-s,dvb-s2 and dvb-t) and instead they identify it as dvb-t frontend, I've tried linkdroid-cnim and create_nimsockets

and they both result in the following:

 

NIM Socket 0:
    Type: DVB-T2
    Name: Availink avl6862
    Has_Outputs: no
    Frontend_Device: 0

Unfortunately I can't test dvb-T2, I can only test dvb-s and dvb-s2 so I wrote the following to the /proc/bus/nim_scokets

 

 

NIM Socket 0:
    Type: DVB-S
    Name: Availink avl6862
    Has_Outputs: no
    Frontend_Device: 0

now enigma2 sees  the tuner as dvb-s and I can use the setup and set the satellite, but the scan doesn't find any channels, when running a scan I get this error in the console

 

 

FE_SET_PROPERTY failed: Bad address

the error is repeated with every frequency it scans.

So what is the cause of this error ? a particular /proc/stb  node missing ? How can I collect more info about this error(enable debuggig ?)

note that the avl6862 driver uses dvb api version 3 (I think) and when running enigma I get this  in the console:

 

DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10

So maybe enigma2 is compiled for dvb api version 5 and this causes it to not being able to communicate correctly with the avl6862 ?

Would appreciate if any of enigma2 experts can help me debug this

 

Thanks

 

Very Very good work :)

 

If you need i can scan DVB-T



Re: Howto build unofficial pli for your unsupported receiver #1613 mrbeam

  • Senior Member
  • 300 posts

+6
Neutral

Posted 11 July 2018 - 22:21

Is there a test build available for download for the Octagon SF4008?


Wavefrontier T90, Vu+ Duo 4k SE (DVB-S2x FBC, DVB-T2, DVB-C USB), Octagon SF4008 (dual DVB-S2, DVB-T2 & DVB-C USB), Mutant HD51 (DVB-S2 & DVB-T2), TBS6920 & TBS6925


Re: Howto build unofficial pli for your unsupported receiver #1614 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 11 July 2018 - 22:36

 

I've ported the e2procfs for the k2pro on the 3.14.29 kernel now I have some of the proc/stb nodes(some of them are just set to null)

I've loaded the avl6862 drivers and I have /dev/dvb/adapter0/frontend0

for /proc/bus/nim_sockets most of the tools I've tried fails to detect that the avl6862 support muliple standards(dvb-s,dvb-s2 and dvb-t) and instead they identify it as dvb-t frontend, I've tried linkdroid-cnim and create_nimsockets

and they both result in the following:

 

NIM Socket 0:
    Type: DVB-T2
    Name: Availink avl6862
    Has_Outputs: no
    Frontend_Device: 0

Unfortunately I can't test dvb-T2, I can only test dvb-s and dvb-s2 so I wrote the following to the /proc/bus/nim_scokets

 

 

NIM Socket 0:
    Type: DVB-S
    Name: Availink avl6862
    Has_Outputs: no
    Frontend_Device: 0

now enigma2 sees  the tuner as dvb-s and I can use the setup and set the satellite, but the scan doesn't find any channels, when running a scan I get this error in the console

 

 

FE_SET_PROPERTY failed: Bad address

the error is repeated with every frequency it scans.

So what is the cause of this error ? a particular /proc/stb  node missing ? How can I collect more info about this error(enable debuggig ?)

note that the avl6862 driver uses dvb api version 3 (I think) and when running enigma I get this  in the console:

 

DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10

So maybe enigma2 is compiled for dvb api version 5 and this causes it to not being able to communicate correctly with the avl6862 ?

Would appreciate if any of enigma2 experts can help me debug this

 

Thanks

 

Very Very good work :)

 

If you need i can scan DVB-T

 

Well I just tested dvb-t (without antenna) and it give the same error (FE_SET_PROPERTY failed: Bad address) So it probably doesn't work either.



Re: Howto build unofficial pli for your unsupported receiver #1615 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 12 July 2018 - 04:31

Is there a test build available for download for the Octagon SF4008?


Octagon added long ago, you can compile it yourself ;)

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1616 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 12 July 2018 - 04:33

I will compile a different dm7020hdv2 image soon so you could test and report.

The way I want to compile it is not in meta-dream ;)

Open Vision sources: https://github.com/OpenVisionE2


Re: Howto build unofficial pli for your unsupported receiver #1617 ftp21_

  • Senior Member
  • 73 posts

+9
Neutral

Posted 12 July 2018 - 07:42

I've ported the e2procfs for the k2pro on the 3.14.29 kernel now I have some of the proc/stb nodes(some of them are just set to null)

I've loaded the avl6862 drivers and I have /dev/dvb/adapter0/frontend0

for /proc/bus/nim_sockets most of the tools I've tried fails to detect that the avl6862 support muliple standards(dvb-s,dvb-s2 and dvb-t) and instead they identify it as dvb-t frontend, I've tried linkdroid-cnim and create_nimsockets

and they both result in the following:

 

NIM Socket 0:
    Type: DVB-T2
    Name: Availink avl6862
    Has_Outputs: no
    Frontend_Device: 0

Unfortunately I can't test dvb-T2, I can only test dvb-s and dvb-s2 so I wrote the following to the /proc/bus/nim_scokets

 

 

NIM Socket 0:
    Type: DVB-S
    Name: Availink avl6862
    Has_Outputs: no
    Frontend_Device: 0

now enigma2 sees  the tuner as dvb-s and I can use the setup and set the satellite, but the scan doesn't find any channels, when running a scan I get this error in the console

 

 

FE_SET_PROPERTY failed: Bad address

the error is repeated with every frequency it scans.

So what is the cause of this error ? a particular /proc/stb  node missing ? How can I collect more info about this error(enable debuggig ?)

note that the avl6862 driver uses dvb api version 3 (I think) and when running enigma I get this  in the console:

 

DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10

So maybe enigma2 is compiled for dvb api version 5 and this causes it to not being able to communicate correctly with the avl6862 ?

Would appreciate if any of enigma2 experts can help me debug this

 

Thanks

 

Mhhhh how many frontends you have into /dev/dvb?

 

Patches are applied to Openpli kernel or to Coreelec?



Re: Howto build unofficial pli for your unsupported receiver #1618 moham96

  • Senior Member
  • 175 posts

+20
Neutral

Posted 12 July 2018 - 08:44

 

 

Mhhhh how many frontends you have into /dev/dvb?

 

just one AVL6862(which support DVB-S and DVB-T)

/ # find  /dev/dvb/
/dev/dvb/
/dev/dvb/adapter0
/dev/dvb/adapter0/frontend0
/dev/dvb/adapter0/net2
/dev/dvb/adapter0/dvr2
/dev/dvb/adapter0/demux2
/dev/dvb/adapter0/net1
/dev/dvb/adapter0/dvr1
/dev/dvb/adapter0/demux1
/dev/dvb/adapter0/net0
/dev/dvb/adapter0/dvr0
/dev/dvb/adapter0/demux0

 

 

Patches are applied to Openpli kernel or to Coreelec?

coreelec kernel

 


Re: Howto build unofficial pli for your unsupported receiver #1619 ftp21_

  • Senior Member
  • 73 posts

+9
Neutral

Posted 12 July 2018 - 10:07

I try to copy the dvb-avl into dvb_tv but i receive:

| make[5]: *** No rule to make target 'drivers/media/dvb-core/dvb-core.c', needed by 'drivers/media/dvb-core/dvb-core.o'.  Stop.
| /home/openatvbuilder/openpli-oe-core/build/tmp/work-shared/k1pro/kernel-source/scripts/Makefile.build:455: recipe for target 'drivers/media/dvb-core' failed
| make[4]: *** [drivers/media/dvb-core] Error 2

How i can fix?



Re: Howto build unofficial pli for your unsupported receiver #1620 takitr

  • Senior Member
  • 77 posts

+24
Neutral

Posted 12 July 2018 - 16:48

I've ported the e2procfs for the k2pro on the 3.14.29 kernel now I have some of the proc/stb nodes(some of them are just set to null)
I've loaded the avl6862 drivers and I have /dev/dvb/adapter0/frontend0
for /proc/bus/nim_sockets most of the tools I've tried fails to detect that the avl6862 support muliple standards(dvb-s,dvb-s2 and dvb-t) and instead they identify it as dvb-t frontend, I've tried linkdroid-cnim and create_nimsockets
and they both result in the following:


NIM Socket 0:
Type: DVB-T2
Name: Availink avl6862
Has_Outputs: no
Frontend_Device: 0

Unfortunately I can't test dvb-T2, I can only test dvb-s and dvb-s2 so I wrote the following to the /proc/bus/nim_scokets

NIM Socket 0:
Type: DVB-S
Name: Availink avl6862
Has_Outputs: no
Frontend_Device: 0

now enigma2 sees the tuner as dvb-s and I can use the setup and set the satellite, but the scan doesn't find any channels, when running a scan I get this error in the console

FE_SET_PROPERTY failed: Bad address

the error is repeated with every frequency it scans.
So what is the cause of this error ? a particular /proc/stb node missing ? How can I collect more info about this error(enable debuggig ?)
note that the avl6862 driver uses dvb api version 3 (I think) and when running enigma I get this in the console:

DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10

So maybe enigma2 is compiled for dvb api version 5 and this causes it to not being able to communicate correctly with the avl6862 ?
Would appreciate if any of enigma2 experts can help me debug this

Thanks
Fe set property patch

https://github.com/C...6a7496ad8e107f3


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users