49 replies to this topic

[WanWizard]

See my post #8

[MCelliotG]

I saw it, the last question was rhetorical!

[WanWizard]

Ok. Not very good at guessing the meaning behind a piece of text I'm afraid...

[frankviana]

If you have an interes and patience I suggest start with this: https://www.satellit...p-guide.170042/

and this: http://sat-dx.club/v...df42159ef125f20

 

I did this steps, but don't work too:

 

I see the pid: Trece channel: 5011 (edited extra param in hex: don't work) and 4096 too (don't work)

 

Strange because reference don't change later...

 

See the pictures:

 

PID 4096

 

 pid 4096_.png   438.52KB   7 downloads

 

 pid 4096.png   147.09KB   7 downloads

 

PID 5011

 

 pid 5011.png   418.36KB   5 downloads

 

 pid 5011_.png   111.93KB   4 downloads

 

First, I need to see the "decaped" file... but I see BITRATE: 0

 

Example: satellites.co.uk:

 

root@vusolo2:~# astra --analyze "t2mi://#t2mi_pid=4096&t2mi_input=http://127.0.0.1:800...1910E65:0:0:0:"
Nov 13 06:57:08: INFO: Starting Astra SM 0.2
Nov 13 06:57:08: INFO: [t2mi/analyze] L1-current: PLP 0 (Data Type 1), group 1 (*)
Nov 13 06:57:08: INFO: [t2mi/analyze] L1-current: PLP 1 (Data Type 1), group 1
Nov 13 06:57:08: INFO: [t2mi/analyze] selected data PLP 0 (auto)
Nov 13 06:57:08: INFO: PAT: tsid: 11
Nov 13 06:57:08: INFO: PAT: pid: 16 NIT
Nov 13 06:57:08: INFO: PAT: pid: 2010 PMT pnr: 2010
Nov 13 06:57:08: INFO: PAT: pid: 2020 PMT pnr: 2020
Nov 13 06:57:08: INFO: PAT: pid: 2030 PMT pnr: 2030
Nov 13 06:57:08: INFO: PAT: pid: 2040 PMT pnr: 2040
Nov 13 06:57:08: INFO: PAT: pid: 2050 PMT pnr: 2050
Nov 13 06:57:08: INFO: PAT: pid: 2060 PMT pnr: 2060
Nov 13 06:57:08: INFO: PAT: pid: 2070 PMT pnr: 2070
Nov 13 06:57:08: INFO: PAT: pid: 2080 PMT pnr: 2080
Nov 13 06:57:08: INFO: PAT: pid: 2090 PMT pnr: 2090
Nov 13 06:57:08: INFO: PAT: pid: 2100 PMT pnr: 2100
Nov 13 06:57:08: INFO: PAT: crc32: 0xD7A1B3F
Nov 13 06:57:08: INFO: PMT: pnr: 2090
Nov 13 06:57:08: INFO: PMT: pid: 2091 PCR
Nov 13 06:57:08: INFO: PMT: descriptor: 0x050443554549
Nov 13 06:57:08: INFO: VIDEO: pid: 2091 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Nov 13 06:57:08: INFO: AUDIO: pid: 2092 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Nov 13 06:57:08: INFO: DATA: pid: 2095 type: User private (0x86)
Nov 13 06:57:08: INFO: PMT: crc32: 0x3461464C
Nov 13 06:57:08: INFO: PMT: pnr: 2050
Nov 13 06:57:08: INFO: PMT: pid: 2051 PCR
Nov 13 06:57:08: INFO: PMT: descriptor: 0x050443554549
Nov 13 06:57:08: INFO: VIDEO: pid: 2051 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Nov 13 06:57:08: INFO: AUDIO: pid: 2052 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Nov 13 06:57:08: INFO: DATA: pid: 2055 type: User private (0x86)
Nov 13 06:57:08: INFO: PMT: crc32: 0xD50E9346
Nov 13 06:57:08: INFO: PMT: pnr: 2030
Nov 13 06:57:08: INFO: PMT: pid: 2031 PCR
Nov 13 06:57:08: INFO: PMT: descriptor: 0x050443554549
Nov 13 06:57:08: INFO: VIDEO: pid: 2031 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Nov 13 06:57:08: INFO: AUDIO: pid: 2032 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Nov 13 06:57:08: INFO: DATA: pid: 2035 type: User private (0x86)
Nov 13 06:57:08: INFO: PMT: crc32: 0xE10BD564
Nov 13 06:57:08: INFO: PMT: pnr: 2100
Nov 13 06:57:08: INFO: PMT: pid: 2101 PCR
Nov 13 06:57:08: INFO: VIDEO: pid: 2101 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Nov 13 06:57:08: INFO: AUDIO: pid: 2102 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Nov 13 06:57:08: INFO: PMT: crc32: 0x5D2C7C65
Nov 13 06:57:08: INFO: PMT: pnr: 2040
Nov 13 06:57:08: INFO: PMT: pid: 2041 PCR
Nov 13 06:57:08: INFO: PMT: descriptor: 0x050443554549
Nov 13 06:57:08: INFO: VIDEO: pid: 2041 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Nov 13 06:57:08: INFO: AUDIO: pid: 2042 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Nov 13 06:57:08: INFO: DATA: pid: 2045 type: User private (0x86)
Nov 13 06:57:08: INFO: PMT: crc32: 0x81CF798A
Nov 13 06:57:08: INFO: PMT: pnr: 2070
Nov 13 06:57:08: INFO: PMT: pid: 2071 PCR
Nov 13 06:57:08: INFO: PMT: descriptor: 0x050443554549
Nov 13 06:57:08: INFO: VIDEO: pid: 2071 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Nov 13 06:57:08: INFO: AUDIO: pid: 2072 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Nov 13 06:57:08: INFO: DATA: pid: 2075 type: User private (0x86)
Nov 13 06:57:08: INFO: PMT: crc32: 0x68E73575
Nov 13 06:57:08: INFO: PMT: pnr: 2010

[frankviana]

This is another T2-MI package too (TDT Colombia) - SES6 40.5 W, but same data:

 

Original transfered data:

 

 UNTOUCH.png   338.21KB   2 downloads

[frankviana]

This is all t2-mi transponders... about 8-10 channels:

 

 ses6-40w.png   427.55KB   9 downloads

Edited by frankviana, 9 May 2018 - 22:39.

[frankviana]

 

T2-MI working on OpenPli.

But in this moment, you need create everything manually.

On Zgemma H7S I can stream ZeonBood T2-MI services from Astra 4A & SES 5 (4.9E)  for decapsulation using astra-sm from feed.

 

Here is my astra config file, in which I added a little instruction for ZeonBood: https://github.com/T...a-sm/config.lua

 

 

Hi friend. I need your help to decap this t2-mi transponders... I'm watching using Octagon sx88, but I need this channels to test my vu zero 4k.

 

Thanks

[frankviana]

New firmware octagon sx88 and marked MTS option (transponder edit):

 

 CANAL TRECE - APOS MARCAR MTS E BUSCAR.png   398.44KB   2 downloads

 

Don't appear DATA channel, but a tv channel (dreambox edit). I see the real pids and working fine.

Edited by frankviana, 21 May 2018 - 12:08.

[frankviana]

This is all t2-mi transponders... about 8-10 channels:

 

ses6-40w.png

 

12 tv channels and 03 radio channels (08 transponders)

[frankviana]

Just a little insight (as the author of that article).

The genius Athoik in SatDreamGr team was very into creating this solution after my idea and I'm really thankful to him for that!

T2-MI is a challenge in Enigma2 and involves understanding how this encapsulation type works but more importantly how the decapsulation works. As described the stream is enclosed in a pid of the transponder (99% of these transmissions use pid 4096).

So what we needed is something to read this pid, use it as source, process it (decapsulate it) and then read the contents and finally output them.

 

So the chain is (very roughly)

1. reception of the transponder (input)

2. isolation of the pid

3. decapsulation/analysis of the pid

4. content decoding

5. content output

 

As you can see, this is more complex than simply receiving a transponder and output the pids directly. The satellite tuners read a TS transponder, decode the pids and output the content directly for viewing. So, we needed something to intervene in this chain that permorms steps 2, 3 and 4.

Initially I opted to try newspaperman's T2-MI decoder. This worked but was very CPU consuming, which means in real time we had lots of glitches. Granted, not everything was tried to reduce the CPU load, perhaps it could work better with some tweaking.

Athoik then came up with a better solution that involved astra-sm's internal t2mi_decap process (please correct me if I'm wrong I may not remember exactly). That was much better since the astra-sm took over the processing and that reduced the load which resulted to a glitch free picture.

 

So, in order to automate the processes for user facilitation (and not the need of telnet commands), Athoik introduced pid caching to enigma2. This way he managed to virtually assign any pid to a service even if not registered in the pat, and stream from that. This became our source. Afterwards astra-sm takes over and outputs the decapsulated data. The only drawback is that astra-sm will not output to enigma2 directly as normal channels but only as streams, so everything had to be done manually.

 

Now, the question is

Can a T2-MI decapsulation become direct in Enigma2?

The answer is: YES

 

Is it an easy task?

NO!

 

First what should be used is a standalone decapsulator (I'm not sure if T2mi_decap binary can be used independantly from astra-sm) which will act as an Enigma2 process with the minimal CPU load possible! (If possible)

Then Enigma2 needs to be patched and rewritten so that a pid option can be added to ScanSetup to add pid caching to any service reference without the use of Dreamboxedit and other editors.

Afterwards the T2-MI reception options need to be added to DVB-S/S2 that means T2-MI system, PLP ID etc, as manual options or auto discovery (even more complex).

Then any satellite.xml needs to be rewritten with the above options, which means lamedb patching as well. This is the same that happened with multistreams where the MIS options were added which took a lot of Enigma2 patching.

 

This (and is described very simply) is A TON of work, and besides, who will do it and why?

So, my suggestion is take what has been offered already and be patient. This is a hobby from people that offered their time, knowledge and expertise and on top of that other third parties already benefited from by doing all of the above in closed source receivers (you name who....).

 

Tests: from here: https://www.satellit...p-guide.170042/

 

4000 H 3750

 

 multistream.png   181.64KB   6 downloads

 

New data using dreambox edit:

 

Name: 4000H t2mi (fake service) - OK

Service Type: 1 (TV) - OK

Check the K (Keep). OK

Extra parameters: add c:151000, where 15 is the cached index and 1000 is the hex value for 4096. This will cache this pid in the lamedb, and will provide all T2-MI data. but using 4t2 analyzer, I see PID 64, then in HEX = 40, then, C:1540

Click Save. OK

After this editing, the data service reference will change to 1:0:1:320:32A:0:1910E65:0:0:0: but here: 1:0:64:320:3A2:0:C7A0FA0:0:0:0 (old data) and 1:0:1:320:3A2:0:C7A0FA0:0:0:0 (new data) - OK

 

Results:

 

 new data.png   614.77KB   5 downloads

 

using astra-sm:

 

astra --analyze "t2mi://#t2mi_pid=64&t2mi_input=http://127.0.0.1:8001/1:0:1:320:3A2:0:C7A0FA0:0:0:0"

 

0 bytes:

 

 astra-sm.png   88.92KB   4 downloads

Edited by frankviana, 21 May 2018 - 13:50.

[frankviana]

TOP:

 

Mem: 207936K used, 1115260K free, 148K shrd, 6920K buff, 75736K cached
CPU:   0% usr   0% sys   0% nic  99% idle   0% io   0% irq   0% sirq
Load average: 0.14 0.08 0.04 2/142 1777
  PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
  935     1 root     S     265m  21%   0% /usr/bin/init_client /lib/modules/4.1.20-1.9/extra/dvb-bcm.ko /lib/modules/4.1.20-1.9/extra/brcmfb.ko
 1166     1 root     S    11152   1%   0% /usr/bin/astra --pid /var/run/astra.pid /etc/astra/astra.conf

 

/etc/astra/astra.conf

 

#!/usr/bin/astra
log.set({ stdout = false, debug = false, syslog = "astra", })

f4000plp103 = make_t2mi_decap({
        name = "4000H SID 0x320",
        input = "http://127.0.0.1:800...C7A0FA0:0:0:0",
        plp = 103,
        pnr = 0,
        pid = 64,
})

[frankviana]

cd /usr/bin

killall astra

 

again: astra --analyze "t2mi://#t2mi_pid=64&t2mi_input=http://127.0.0.1:800...:C7A0FA0:0:0:0"

 

no results, too

 

[frankviana]

cd /usr/bin

killall astra

 

again: astra --analyze "t2mi://#t2mi_pid=64&t2mi_input=http://127.0.0.1:800...:C7A0FA0:0:0:0"

 

no results, too

 

 

How to get decap correct process?

[frankviana]

4000 h 3750 with 2 channels: CANAL TRECE and CANAL TRECE 2

 

Using record function sx88 I see (media info): CANAL TRECE

 

General
Complete name               : D:\CANAL TRECE-20052018-1001-0\CANAL TRECE-20052018-1001-0\0000.ts
Format                      : MPEG-TS
Format profile              : No PAT/PMT
File size                   : 291 MiB
Duration                    : 7 min 49 s
Overall bit rate            : 5 194 kb/s

Video
ID                          : 5011 (0x1393)
Format                      : AVC
Format/Info                 : Advanced Video Codec
Format profile              : High@L4.1
Format settings             : CABAC / 4 Ref Frames
Format settings, CABAC      : Yes
Format settings, ReFrames   : 4 frames
Duration                    : 7 min 49 s
Bit rate                    : 4 743 kb/s
Width                       : 1 920 pixels
Height                      : 1 080 pixels
Display aspect ratio        : 16:9
Frame rate                  : 29.970 (30000/1001) FPS
Color space                 : YUV
Chroma subsampling          : 4:2:0
Bit depth                   : 8 bits
Scan type                   : Interlaced
Scan type, store method     : Separated fields
Scan order                  : Top Field First
Bits/(Pixel*Frame)          : 0.076
Stream size                 : 266 MiB (91%)
Color range                 : Limited
Color primaries             : BT.709
Transfer characteristics    : BT.709
Matrix coefficients         : BT.709

Audio
ID                          : 5012 (0x1394)
Format                      : MPEG Audio
Format version              : Version 1
Format profile              : Layer 2
Duration                    : 7 min 49 s
Bit rate mode               : Constant
Bit rate                    : 192 kb/s
Channel(s)                  : 2 channels
Sampling rate               : 48.0 kHz
Frame rate                  : 41.667 FPS (1152 SPF)
Compression mode            : Lossy
Delay relative to video     : -1 s 312 ms
Stream size                 : 10.8 MiB (4%)

Text #1
ID                          : 5011 (0x1393)-CC1
Format                      : EIA-608
Muxing mode                 : SCTE 128 / DTVCC Transport
Muxing mode, more info      : Muxed in Video #1
Duration                    : 7 min 49 s
Bit rate mode               : Constant
Stream size                 : 0.00 Byte (0%)
CaptionServiceName          : CC1

Text #2
ID                          : 5011 (0x1393)-1
Format                      : EIA-708
Muxing mode                 : SCTE 128 / DTVCC Transport
Muxing mode, more info      : Muxed in Video #1
Duration                    : 7 min 49 s
Bit rate mode               : Constant
Stream size                 : 0.00 Byte (0%)

[frankviana]

OpenPli 6.2 and satvenus backup, I see some channels (bouquets), but no astra-sm plugin/config. Then how to open these channels using this image? Another way to open multistream? I don't have signal 4,8ºe here.

 

 1_0_1_1B_48_20_0_0_0_0_19700101013330.jpg   82.65KB   4 downloads

 

 satvenus backup1.png   107.45KB   4 downloads

 

 satvenus backup2.png   439.91KB   3 downloads

 

 

[zeros]

Here with dm920 it works. (With homebuild PLi).
I ordered specially second tuner for Multi Stream, to try it out!

Attached Files

•  A0F74127-88B9-4E5F-A51A-DE3715AD558A.png   792.73KB   5 downloads
•  5F0DB200-EF9E-4022-BDE4-F923CC828F1A.png   486.13KB   3 downloads

[zeros]

Sorry for the wrong info, these are MS channels, and NOK at the moment. My dm920 shold show them, but don’t :-(

Attached Files

•  852BD86C-00A6-46F3-B570-EECAF9DEE129.png   391.7KB   2 downloads

Edited by zeros, 21 May 2018 - 18:50.

[zeros]

I will try Taapat suggestions later, maybe so it works?
https://forums.openp...mi/#entry883762

[frankviana]

I will try Taapat suggestions later, maybe so it works?
https://forums.openp...mi/#entry883762

 

No show packages...I tried too using pid 4096 (both: 64 and 4096), but 4T2 analyzer show pid 64

[zeros]

However, it works!

Attached Files

•  716821E5-A2E4-4A0E-B0D8-2BA2E21E72BA.png   371.34KB   9 downloads
•  958DC047-E7AB-47DE-A08B-5CA0678C6972.png   130.63KB   6 downloads
•  339C6249-0DAF-4E2A-B8D6-3D35F89074B7.png   130.1KB   6 downloads
•  1C553825-E6FF-409F-8B95-AB81A40C25C2.png   329.29KB   5 downloads