Jump to content


Photo

vu+duo2 loop steeds vast op de nieuwe image

Started by snowman.nl, 29 Oct 2018 13:15
Vuduo2

  • Please log in to reply
95 replies to this topic

Re: vu+duo2 loop steeds vast op de nieuwe image #61 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 17 November 2018 - 17:00

Hoi Jongens

 

heb nou een update gedaan reboot nou hij doet nou eens zo raar

 

 

 

 

 

write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
[eDVBPESReader] ERROR reading PES (fd=54): Value too large for defined data type
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
[gRC] main thread is non-idle! display spinner!
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[gRC] main thread is non-idle! display spinner!
 


Re: vu+duo2 loop steeds vast op de nieuwe image #62 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 17 November 2018 - 17:02

et : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000

 

 

 

 

 

 

BSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 4 found
[eDVBSatelliteEquipmentControl] lnb 5 found
[eDVBSatelliteEquipmentControl] final score 10003
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 10832000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2,                    rolloff 0, is_id -1, pls_mode 1, pls_code 0
[eDVBFrontend1] tuning to 1082 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF11:421:1:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=1 fesource=1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
et : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 1920[eDVBFrontend1] set static current limiting
[eDVBServicePlay] timeshift

 

 

 

 

 

 

 

 

 

 

 

 

 

write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
[gRC] main thread is non-idle! display spinner!
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[gRC] main thread is non-idle! display spinner!
[ActionMap] Keymap 'InfobarChannelSelection' -> Action = 'keyUp'
[Skin] Processing screen: ChannelSelection_summary
[ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'
[eDVBServicePlay] timeshift
playing 1:0:19:EF11:421:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:19:1B6C:C88:3:EB0000:0:0:0:
[eDVBServicePlay] timeshift
[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP  ok
[eDVBVideo0] VIDEO_STOP ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] destroy
[eDVBText0] DEMUX_STOP ok
TuxTxt stopped service 22
[eDVBText0] destroy
cleaning up
TuxTxt cache cleared
[eDVBResourceManager] start release channel timer
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x16fec68
[eEPGCache] remove channel 0x16fec68
[eDVBResourceManager] allocate channel.. 0421:0001
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 4 found
[eDVBSatelliteEquipmentControl] lnb 5 found
[eDVBSatelliteEquipmentControl] final score 10003
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 4 found
[eDVBSatelliteEquipmentControl] lnb 5 found
[eDVBSatelliteEquipmentControl] final score 10003
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 10832000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
[eDVBFrontend1] tuning to 1082 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF11:421:1:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=1 fesource=1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0

 


Edited by snowman.nl, 17 November 2018 - 17:02.

Re: vu+duo2 loop steeds vast op de nieuwe image #63 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 17 November 2018 - 17:04

en hij zit nou mot vast


Re: vu+duo2 loop steeds vast op de nieuwe image #64 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 17 November 2018 - 17:09

ite ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 192000
write ret : 192000
write to /dev/lcd2 : 1920[eDVBFrontend1] set static current limiting
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[DVBCAHandler] no more services
[gRC] main thread is non-idle! display spinner!
[gRC] main thread is non-idle! display spinner!
[gRC] main thread is non-idle! display spinner!
[ActionMap] Keymap 'InfobarShowHideActions' -> Action = 'toggleShow'
[eDVBServicePlay] timeshift
[ActionMap] Keymap 'InfobarChannelSelection' -> Action = 'keyUp'
[Skin] Processing screen: ChannelSelection_summary
[ActionMap] Keymap 'ChannelSelectEditActions' -> Action = 'contextMenu'
[Skin] Processing screen: ChannelContextMenu
[Skin] Processing screen: SimpleSummary
[eDVBFrontend1] setTone 0
[gRC] main thread is non-idle! display spinner!
[gRC] main thread is non-idle! display spinner!


Re: vu+duo2 loop steeds vast op de nieuwe image #65 WanWizard

  • PLi® Core member
  • 70,381 posts

+1,807
Excellent

Posted 17 November 2018 - 18:11

Daaruit kan ik niet afleiden waarom hij vind dat de main thread not idle is. Dat is meestal omdat er een plugin of proces start die vervolgens hangt (bv omdat internet niet reageert, een share benadert wordt die niet online is, etc).

 

Dan hangt de box dus niet, dan heb je een spinner links boven die aangeeft dat de box op iets wacht.

 

Je hebt dus iets draaien dat het Enigma proces "ophangt".


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: vu+duo2 loop steeds vast op de nieuwe image #66 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 18 November 2018 - 11:45

Mean thread is not idle = spinner = soms plugin die blijft hangen, maar meestal driver crash. Volgens mij had ik dat al eens genoemd?


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: vu+duo2 loop steeds vast op de nieuwe image #67 WanWizard

  • PLi® Core member
  • 70,381 posts

+1,807
Excellent

Posted 18 November 2018 - 14:02

Dat is bij een VU+ niet onwaarschijnlijk, nee. ;)

 

Maar vaak genoeg zie je bij een driver crash ook het beeld gewoon doorgaan zonder spinner, dus een zekerheid is dat zeker niet.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: vu+duo2 loop steeds vast op de nieuwe image #68 alias haha

  • Senior Member
  • 361 posts

+2
Neutral

Posted 19 November 2018 - 07:14

Ik heb laatst ook iets raars mee gemaakt met een et5000, ook iets met het netwerk.

Als box van een verse opstart wil opstarten, softcam is geactiveerd en netwerk kabel hangt er in, start box niet op. Haal ik de kabel er uit, start ie meteen door.

Of ik deactiveer de softcam en zet de netwerkabel er in, en doe weer een complete herstart na ik de power kabel er in steek, start ie ook op.

Dit is vanaf openpli 6.x volgens mij

Openatv reageert de ontvanger(VU) ook slecht als softcam is geactiveerd zonder netwerk kabel er in gestoken.

Misschien iets van een probleem van de latere linux versies van enigma?


Edited by alias haha, 19 November 2018 - 07:15.

Vu+ duo 4K | Vu+ duo²

Zgemma H9S SE | Zgemma H9 Combo

Wavefrontier T90

Re: vu+duo2 loop steeds vast op de nieuwe image #69 WanWizard

  • PLi® Core member
  • 70,381 posts

+1,807
Excellent

Posted 19 November 2018 - 10:33

Over welke softcam hebben we het?

 

Oscam vereist dat de box een correcte tijd heeft als het opstart, en zo niet, dan blijft hij daar maximaal 60 seconden op wachten.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: vu+duo2 loop steeds vast op de nieuwe image #70 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 19 November 2018 - 11:14

Had vanmorgen ook 3 vast loper gehad

 

heb dit nou weer aan gezet en nou doet die boef niks

init 4
ENIGMA_DEBUG_LVL=4 enigma2

 

 

zijn er nog andere optie om fout log te bewaren en te zien zodat ik dat jullie kan laten zien


Re: vu+duo2 loop steeds vast op de nieuwe image #71 WanWizard

  • PLi® Core member
  • 70,381 posts

+1,807
Excellent

Posted 19 November 2018 - 11:22 

ENIGMA_DEBUG_LVL=4 enigma2 2>&1 | tee /home/root/debug.log

dat schrijft alles wat over het scherm wandelt direct weg naar een bestand.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: vu+duo2 loop steeds vast op de nieuwe image #72 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 20 November 2018 - 17:54

hoi jongens

 

even update de vu+do2 loopt na 24 uur vlekkeloos laat het mooi lopen kijken of  hij de rest van week ook mooi door loopt ;)  :)  


Re: vu+duo2 loop steeds vast op de nieuwe image #73 WanWizard

  • PLi® Core member
  • 70,381 posts

+1,807
Excellent

Posted 20 November 2018 - 18:03

Vraag niet hoe het kan, profiteer ervan. ;)


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: vu+duo2 loop steeds vast op de nieuwe image #74 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 20 November 2018 - 19:35

Maar vaak genoeg zie je bij een driver crash ook het beeld gewoon doorgaan zonder spinner, dus een zekerheid is dat zeker niet.

Vroeger of later wil enigma weer iets met ioctls op DVB niveau doen en dan komt onherroepelijk de spinner, want enigma komt dan in "D" process mode.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: vu+duo2 loop steeds vast op de nieuwe image #75 WanWizard

  • PLi® Core member
  • 70,381 posts

+1,807
Excellent

Posted 20 November 2018 - 20:24

Uiteindelijk wel ja. ;)


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: vu+duo2 loop steeds vast op de nieuwe image #76 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 22 November 2018 - 10:45

Hij doet ineens weer een beetje gek zie log

 

 

[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox a                     uto
[VideoHardware] setMode - port: DVI mode: 1080p rate: auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox a                     uto
[eInit] + (41) eServiceFactoryMP3
[browser] browser start
[SKIN] Parsing embedded skin <embedded-in-'VBMain'>
[Skin] Processing screen: <embedded-in-'VBMain'>
[Skin] Processing screen: SimpleSummary
[Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.openpli.org')
[eConsoleAppContainer] Starting /bin/ping
[Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.nl')
[eConsoleAppContainer] Starting /bin/ping
[Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.com')
[eConsoleAppContainer] Starting /bin/ping
[Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.openpli.org')
[eConsoleAppContainer] Starting /bin/ping
[Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.nl')
[eConsoleAppContainer] Starting /bin/ping
[Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.com')
[eConsoleAppContainer] Starting /bin/ping
[Skin] No skin to read...
[Skin] Processing screen: <embedded-in-'auto3D'>
[Skin] Processing screen: SimpleSummary
[eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[Skin] Processing screen: <embedded-in-'Screensaver'>
[Skin] Processing screen: SecondInfoBar
[Skin] Processing screen: SecondInfoBarSimple
[SKIN] Parsing embedded skin <embedded-in-'HideVBILine'>
[Skin] Processing screen: <embedded-in-'HideVBILine'>
[Skin] Processing screen: ChannelSelection
[Skin] Processing screen: RdsInfoDisplay
[Skin] No skin to read...
[Skin] Processing screen: <embedded-in-'RdsInfoDisplaySummary'>
[Skin] Processing screen: UnhandledKey
[Skin] Processing screen: Dish
[Skin] Processing screen: BufferIndicator
[Skin] Processing screen: TimeshiftState
[Skin] Processing screen: TimeshiftLive
[Skin] Processing screen: SubtitleDisplay
RemovePopup, id = ZapError
[Skin] Processing screen: InfoBar
[Skin] Processing screen: InfoBarSummary
[eEPGCache] 66445 events read from /hdd/epg.dat
[Skin] Processing screen: Volume
warning, skin is missing element VolumeText in <class 'Screens.Volume.Volume'>
[Skin] Processing screen: Mute
setValue 75
[eDVBVolumecontrol] Setvolume: raw: 75 75, -1db: 16 16
[eDVBVolumecontrol] SetVolume failed to open mixer: Device or resource busy
[Skin] Processing screen: Scart
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
playing 1:0:1:1B6C:C88:3:EB0000:0:0:0:
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 0c88:0003
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] lnb 4 found
[eDVBSatelliteEquipmentControl] sat 235 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 5 found
[eDVBSatelliteEquipmentControl] final score 10003
[eDVBFrontend1] opening frontend
[eDVBFrontend1] tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] lnb 4 found
[eDVBSatelliteEquipmentControl] sat 235 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 5 found
[eDVBSatelliteEquipmentControl] final score 10003
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend1] prepare_sat System 1 Freq 11856000 Pol 1 SR 29900000 INV 2 FEC 2                      orbpos 235 system 1 modulation 2 pilot 2, rolloff 2, is_id -1, pls_mode 1, pls_                     code 0
[eDVBFrontend1] tuning to 1256 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1B6C:C88:3:EB0000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Avahi] watch activated: 0x1
[Console] finished: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'eth0'                     )
[Console] command: route -n | grep eth0
[eConsoleAppContainer] Starting /bin/sh
[Console] finished: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'wlan0                     ')
[Console] command: route -n | grep wlan0
[eConsoleAppContainer] Starting /bin/sh
[Console] finished: ('/bin/ping', '/bin/ping', '-c', '1', 'www.openpli.org')
[Console] finished: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.nl')
[Console] finished: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.com')
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuuno4kse' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend1] set static current limiting
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo2-2' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend1] set sequence pos 3
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuuno4kse' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Console] finished: route -n | grep eth0
0.0.0.0
192.168
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo2-2' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend1] set sequence pos 4
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo2' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend1] setVoltage 1
[Console] finished: route -n | grep wlan0
nameservers: [[195, 121, 1, 34], [195, 121, 1, 66]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth                     0': {'dhcp': False}}
self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0                     , 0, 0, 0], 'up': False, 'mac': '78:44:76:b0:05:98', 'dhcp': True, 'netmask': [0                     , 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False,                      'ip': [192, 168, 2, 17], 'up': True, 'mac': '00:1d:ec:0a:b7:30', 'dhcp': False,                      'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 254]}}
SerienRecorder plugin not found
EPG Refresh Plugin not found
[OpenWebif] failed to listen on Port 80
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend1] sleep 200ms
[Avahi] watch activated: 0x1
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] ADD Service 'vuuno4kse' of type '_e2stream._tcp' at vuuno4kse.local:8001
ADD Peer vuuno4kse=vuuno4kse.local:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] ADD Service 'vuuno4kse' of type '_e2stream._tcp' at vuuno4kse.local:8001
ADD Peer vuuno4kse=vuuno4kse.local:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] ADD Service 'vuduo2' of type '_e2stream._tcp' at vuduo2.local:8001
ADD Peer vuduo2=vuduo2.local:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend1] invalidate current switch params
[eDVBFrontend1] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend1] sleep 50ms
[eDVBFrontend1] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend1] sleep 150ms
[eDVBFrontend1] sendDiseqc: e01038f5(?)
[eDVBFrontend1] sleep 100ms
[eDVBFrontend1] set sequence pos 3
[eDVBFrontend1] setTone 1
[eDVBFrontend1] sleep 10ms
[eDVBFrontend1] update current switch params
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setFrontend 1
[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend1] sleep 500ms
[eDVBFrontend1] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x175dec0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=20
[eEPGCache] channel 0x175dec0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eEPGCache] next update in 2 sec
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=1
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0202), and 1 audio stream(s) (0054), a                     nd the pcr pid is 0202, and the text pid is 0022
[eDVBChannel] getDemux cap=01
[eTSMPEGDecoder] decoder state: play, vpid=0202, apid=0054
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x0202 ok
[eDVBPCR0] DEMUX_START failed: Invalid argument
[eDVBAudio] /dev/dvb/adapter0/audio0: Device or resource busy
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x0054 ok
[eDVBAudio0] DEMUX_START failed: Invalid argument
[eDVBVideo] /dev/dvb/adapter0/video0: Device or resource busy
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x0202 ok
[eDVBVideo0] DEMUX_START failed: Invalid argument
[eDVBText0] DMX_SET_PES_FILTER pid=0x0022 ok
[eDVBText0] DEMUX_START ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=0022
[eDVBPESReader] DMX_SET_PES_FILTER pid=0022
[eDVBCAService] new service 1:0:1:1B6C:C88:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1B6C:C88:3:EB0000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 09d8 for service_id 1b6c
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0202), and 2 audio stream(s) (0054, 00                     60), and the pcr pid is 0202, and the text pid is 0022
[eTSMPEGDecoder] decoder state: play, vpid=0202, apid=0054
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2523
[eDVBFrontend1] set dynamic current limiting
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2616
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2527
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2628
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2530
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2536
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2540
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2541
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2556
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2557
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2558
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2560
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2561
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2964
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2965
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBServicePMTHandler] sdt update done!
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eEPGCache] start caching events(1542879222)
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eEPGCache] abort non avail schedule other reading
[eEPGCache] abort non avail netmed schedule reading
[eEPGCache] abort non avail netmed schedule other reading
[eEPGCache] abort non avail FreeSat schedule_other reading
[eEPGCache] abort non avail viasat reading
[eDVBLocalTimerHandler] diff is 6
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 10:33:55
[eDVBLocalTimerHandler] m_time_difference is 6
[eDVBLocalTimerHandler] set Linux Time
[eDVBChannel] getDemux cap=00
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eEPGCache] nownext finished(1542879243)
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] no PAT entry found.. start delay
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] DVB service failed to tune - error 3
RemovePopup, id = ZapError
AddPopup, id = ZapError
[Skin] Processing screen: MessageBoxSimple
warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.Mes                     sageBox'>(Zender niet gevonden!
(SID not found in PAT))
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[read_png_file] File /tmp/lcd4linux/dpf.png is not recognized as a PNG file
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 09d8 for service_id 1b6c
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0202), and 2 audio stream(s) (0054, 00                     60), and the pcr pid is 0202, and the text pid is 0022
[eTSMPEGDecoder] decoder state: play, vpid=0202, apid=0054
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] no PAT entry found.. start delay
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] DVB service failed to tune - error 3
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 09d8 for service_id 1b6c
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0202), and 2 audio stream(s) (0054, 00                     60), and the pcr pid is 0202, and the text pid is 0022
[eTSMPEGDecoder] decoder state: play, vpid=0202, apid=0054
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] no PAT entry found.. start delay
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] DVB service failed to tune - error 3
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 09d8 for service_id 1b6c
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0202), and 2 audio stream(s) (0054, 00                     60), and the pcr pid is 0202, and the text pid is 0022
[eTSMPEGDecoder] decoder state: play, vpid=0202, apid=0054
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eEPGCache] schedule finished(1542879325)
[eEPGCache] stop caching events(1542879325)
[eEPGCache] next update in 60 min
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] no PAT entry found.. start delay
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] DVB service failed to tune - error 3
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 09d8 for service_id 1b6c
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0202), and 2 audio stream(s) (0054, 00                     60), and the pcr pid is 0202, and the text pid is 0022
[eTSMPEGDecoder] decoder state: play, vpid=0202, apid=0054
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] no PAT entry found.. start delay
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] DVB service failed to tune - error 3
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 09d8 for service_id 1b6c
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0202), and 2 audio stream(s) (0054, 00                     60), and the pcr pid is 0202, and the text pid is 0022
[eTSMPEGDecoder] decoder state: play, vpid=0202, apid=0054
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2520
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift

 


Re: vu+duo2 loop steeds vast op de nieuwe image #77 WanWizard

  • PLi® Core member
  • 70,381 posts

+1,807
Excellent

Posted 22 November 2018 - 10:57

Gek als in geen ontvangst? Want dat is het enige wat ik uit de log kan halen.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: vu+duo2 loop steeds vast op de nieuwe image #78 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 22 November 2018 - 11:10

mmmm hij nou weer rustig log loopt weer wat boef hihihi


Re: vu+duo2 loop steeds vast op de nieuwe image #79 WanWizard

  • PLi® Core member
  • 70,381 posts

+1,807
Excellent

Posted 22 November 2018 - 11:22

Ik begin met toch af te vragen of dit ding ook geen voedingsproblemen begint te krijgen, dit soort vage klachten zijn dan de eerste symtomen.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: vu+duo2 loop steeds vast op de nieuwe image #80 snowman.nl

  • Senior Member
  • 189 posts

+2
Neutral

Posted 22 November 2018 - 12:01

had weer een vastloper

 

^_^ even de log

 

 

 

Attached Files


Back to [NL] Gebruikersondersteuning

Also tagged with one or more of these keywords: Vuduo2

8 user(s) are reading this topic

0 members, 8 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [NL] Gebruikersondersteuning