Hi
Yesterday made update on my zgemma h9s from 6.2 to 7.0 RC 10122018 and found few bugs : volume +/- and mute not working on remote
on 6.2 they are working OK
Posted 11 December 2018 - 10:36
Mod posting in dutch in english forum...?
Oops, sorry, corrected.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 December 2018 - 11:05
There was changed default RC model to H3 (same as H7) model (will be distributed with rc same as using H3,H7)... try change remote controller type (there in input device) to H9 and then try reboot box...
OK will check later, thanks for fast respond
another question
is there chance to change behavior or option
when PAUSE on remote selected then zgemma will pause screen but in backgroud will record, that after PLAY will continue to watch; more or less timeshift acting;
i know that there is currently this already, but it's less intuitive i think because currently i need to use RECORD then select proper option;
but sometimes i'm missing just simple PAUSE and later PLAY
Posted 11 December 2018 - 11:10
Presssing PAUSE on a live feed starts timeshift, yes. If that wouldn't be the case, there is nothing to resume to when you press PLAY?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 December 2018 - 11:20
don't know if I did catch question correctly
when i watch football match live i would like to PAUSE ... go out for few minutes.... and resume PLAY when i return
just by simple PAUSE/PLAY function
it continue timeshift until ill not STOP timeshift or change channel for example
Posted 11 December 2018 - 11:31
I still don't.
What you want is exactly how it works?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 December 2018 - 12:06
don't know if I did catch question correctly
when i watch football match live i would like to PAUSE ... go out for few minutes.... and resume PLAY when i return
just by simple PAUSE/PLAY function
it continue timeshift until ill not STOP timeshift or change channel for example
This is the normal behaviour, you press pause this start the timeshift, when you are back you start watching what your have missed out, so you are no longer live but in timeshift.
So yes the STB needs to continue to record because your are now watching football with a delay due to timeshift, if you fast forward to return to live it continues recording this is also normal since you don't stop timeshift. If you want to stop timeshift, press the STOP button or zap to another channel.
It is not because you are back to live mode with timeshift enabled that the box must decide by itself to stop timeshifting, some people use timeshift when watching program live to be able to go back and watch again the last action.
Some people even enable permanant timeshift to always be able to watch back.
So you need to press STOP if you want to really stop timeshift once enabled.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 December 2018 - 15:40
Hi
Yesterday made update on my zgemma h9s from 6.2 to 7.0 RC 10122018 and found few bugs : volume +/- and mute not working on remote
on 6.2 they are working OK
I thried flash 7rc 20181210 and no problem with Vol+/- or Mutu with RCs H9 and H7 too.
Posted 11 December 2018 - 15:41
Pr2 exactly we are talking about the same
OK I'm back and run several scenarios
zgemma h9s
openpli 7.0 rc 10122018
when remote selected to default - volume +/i, mute not working
when play/pause clicked no action that screen pause, only right-top corner error square
when stop same error
only what is active is REC red button
when something recorder later i can stop/pause/RW/FF all is fine so means remote is fine
set remote to zgemma h9/i55 plus
all is same as above
when
6.2 10122018
remote default
volume +/- OK there is on screen on left color bar with volume control
mute is OK
pause/play not working
stop not working
only REC working
on 6.2 didn't checked only one scenario yet to set remote as zgemma h9/i55 plus
one remark,
even if remote selected to zgemma h9/i55 plus remote on screen not reflecting to one what's in my hand, it's totally different remote
even made googling to check if my remote is proper, so all is fine, common
Posted 11 December 2018 - 18:43
Posted 11 December 2018 - 19:18
Could also be an issue in the driver, the key mapping is diffferent for seperate keys and toggle keys, it could be the driver passes the wrong key code.
Any other H9 users that can confirm this?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 December 2018 - 19:55
7.0rc flashed again:
vol+/- ... works
mute ... works
timeshift play/pause ... works
With input device as "default" (rebooted box after each change in input device). Tried my h9s (=type25) remote and h7s (=type21 = H3)
Could you put here photo your's h9s remote controller ? There were several changes by producer (2 layouts of type25, then replaced with H3 (type21) ...
Posted 11 December 2018 - 20:05
Posted 11 December 2018 - 21:03
Posted 11 December 2018 - 21:16
If you have not H3 (H7) remote controlled (It should be boundled newly with H9S), then you cannot use h.s/h.2s/h.2/h5/h7. And s/s2/h1/h2 is not for H9.
You can use "default" or "H9/i55 Plus". "H9/i55 Plus" is under 7rc.
Install evtest in telnet, stop enigma with "init 4", run evtest, use "0" and try press PlayPause, Vol+, Vol-, Mute ... see codes and write it here...
After it run "init 3".
0 members, 28 guests, 0 anonymous users