Ook DMM8K?
MKV speelt niet in openpli 7 wel in openpli 6
Started by bramjacobse, 21 Jan 2019 16:56
39 replies to this topic
Re: MKV speelt niet in openpli 7 wel in openpli 6 #21
-
- PLi® Core member
- 57,058 posts
+698
Excellent
Posted 24 January 2019 - 12:16
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: MKV speelt niet in openpli 7 wel in openpli 6 #22
-
- Senior Member
- 1,490 posts
+47
Good
Posted 24 January 2019 - 12:20
Vu+DUO4K, (DVB-C FBC & DVB-S2X FBC twin tuner), OpenPLi Nightly Build, My-FullNightHD skin, Bluetooth remote,
2x Synology DS-116, 16 Gb USB3, Autotimer, Bitrate, EPG-Import, Ziggo Kabel-tv, Astra 28.2.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #23
-
- PLi® Core member
- 70,204 posts
+1,798
Excellent
Posted 24 January 2019 - 14:31
Van de DM8000 kan ik me wel iets voorstellen, die had voorheen een aparte dvbmediasink in verband met de niet-standaard API, en die is er een tijd geleden (geen idee waarom) uitgesloopt. Wellicht heeft dit er mee te maken?
Dat heb ik recent gezien, en dat is gecorrigeerd, maar dat zit niet in release, die was toen al uit. Ik wil wel een test image bakken als iemand die testen wil?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #24
-
- Senior Member
- 88 posts
0
Neutral
Posted 24 January 2019 - 14:39
Ik wil wel testen...
-
DM8000 + QNAP 639 NFS share
DM8000 + QNAP 639 NFS share
Re: MKV speelt niet in openpli 7 wel in openpli 6 #25
-
- Senior Member
- 1,490 posts
+47
Good
Posted 24 January 2019 - 15:03
ik wil hem graag testen, Pli 7 draait op de ouwe bak verder prima, (wel een swapfiletje nodig)
Vu+DUO4K, (DVB-C FBC & DVB-S2X FBC twin tuner), OpenPLi Nightly Build, My-FullNightHD skin, Bluetooth remote,
2x Synology DS-116, 16 Gb USB3, Autotimer, Bitrate, EPG-Import, Ziggo Kabel-tv, Astra 28.2.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #26
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 24 January 2019 - 16:38
Cobus, is me net voor..:-)
Als ik re-mux zonder de E-AC3 werkt de MKV wel, alleen heb ik dan het geluidspoor met een extra verteller, die ik niet wil horen.
Ha, de "narrative" track. Da's goed irritant ja. Dan word het toch het geluidsspoor herencoden.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #27
-
- PLi® Core member
- 70,204 posts
+1,798
Excellent
Posted 24 January 2019 - 16:50
Ik wil wel testen...
ik wil hem graag testen, Pli 7 draait op de ouwe bak verder prima, (wel een swapfiletje nodig)
Ik heb een homebuild van develop voor de DM8000 gestart. Ik doe wel een PM als die klaar is. Dat kan een paar uur duren, in bouw zelden mipsel images...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #28
-
- PLi® Core member
- 70,204 posts
+1,798
Excellent
Posted 25 January 2019 - 16:01
Probleem is niet opgelost met het porten van de dvbmediasink uit 6.2-release, met dank aan DeBeek voor het testen.
Hoeveel audiotracks heeft die mkv, en kun je bij het afspelen wel een andere track selecteren dan E-AC3? En werkt die dan wel?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #29
-
- PLi® Core member
- 70,204 posts
+1,798
Excellent
Posted 25 January 2019 - 16:13
Wat wel een verschil is: in 7.0-release zit enigma2-plugin-systemplugins-servicemp3, en die bestond nog niet in 6.2-release.
Het zou me niks verbazen dat die niet DMM-quirk compatible is...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #30
-
- Senior Member
- 88 posts
0
Neutral
Posted 25 January 2019 - 16:15
WanWizard versie log
Log van test versie
[eServiceMP3] construct!
[eServiceMP3] playbin uri=file:///hdd/movie/kinderprogramma/Sarah%20&%20Duck/Acarde%20Dance%20Off.mkv
[eServiceMP3] starting pipeline
[Skin] Processing screen: MoviePlayer
[Skin] Processing screen: InfoBarMoviePlayerSummary
[eServiceMP3] state transition NULL -> READY
[eServiceMP3] state transition READY -> PAUSED
[eDVBDB] getBouquet failed.. no path given!
[eDVBDB] getBouquet failed.. no path given!
resolved to PLAY
[eServiceMP3] trickSeek no need to unpause!
new service started! trying to download cuts!
seekable.getLength() returns: [0, 37730177]
RemovePopup, id = ZapError
[eServiceMP3] loading cuesheet
[eServiceMP3] cutfile not found!
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Could not determine type of stream. (4) from dvbaudiosink0
[eServiceMP3] Gstreamer error: Internal data stream error. (1) from matroskademux0
-
DM8000 + QNAP 639 NFS share
DM8000 + QNAP 639 NFS share
Re: MKV speelt niet in openpli 7 wel in openpli 6 #31
-
- Senior Member
- 88 posts
0
Neutral
Posted 25 January 2019 - 16:15
Openpli 6.2 Versie , Log's met ...en Audio-track switching
[eServiceMP3] playbin uri=file:///hdd/movie/kinderprogramma/Sarah%20&%20Duck/Acarde%20Dance%20Off.mkv
[eServiceMP3] starting pipeline
[Skin] Processing screen: MoviePlayer
[Skin] Processing screen: InfoBarMoviePlayerSummary
[eServiceMP3] state transition NULL -> READY
[eServiceMP3] state transition READY -> PAUSED
[eDVBDB] getBouquet failed.. no path given!
resolved to PLAY
[eServiceMP3] trickSeek no need to unpause!
new service started! trying to download cuts!
seekable.getLength() returns: [0, 37730177L]
[Skin] Processing screen: MessageBoxSimple
warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Resuming playback)
[Skin] Processing screen: MessageBoxSimple_summary
RemovePopup, id = ZapError
[eServiceMP3] loading cuesheet
[eServiceMP3] cutfile not found!
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
Timeout!
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
[ActionMap] Keymap 'InfobarAudioSelectionActions' -> Action = 'audioSelection'
[Skin] Processing screen: AudioSelection
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[eServiceMP3] getSubtitleList finished
[Skin] Processing screen: SimpleSummary
[ActionMap] Keymap 'DirectionActions' -> Action = 'down'
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'SetupActions' -> Action = 'ok'
[eServiceMP3] switched to audio stream 1
[eServiceMP3] getSubtitleList finished
[infobar::audioSelected] 0
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
[ActionMap] Keymap 'InfobarAudioSelectionActions' -> Action = 'audioSelection'
[Skin] Processing screen: AudioSelection
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[eServiceMP3] getSubtitleList finished
[Skin] Processing screen: SimpleSummary
[ActionMap] Keymap 'DirectionActions' -> Action = 'up'
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'upUp'! (Typo in keymap?)
[ActionMap] Keymap 'SetupActions' -> Action = 'ok'
[eServiceMP3] switched to audio stream 0
[eServiceMP3] getSubtitleList finished
[infobar::audioSelected] 0
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
[ActionMap] Keymap 'InfobarAudioSelectionActions' -> Action = 'audioSelection'
[Skin] Processing screen: AudioSelection
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[eServiceMP3] getSubtitleList finished
[Skin] Processing screen: SimpleSummary
[ActionMap] Keymap 'SetupActions' -> Action = 'cancel'
[infobar::audioSelected] 0
[ActionMap] Keymap 'MoviePlayerActions' -> Action = 'leavePlayer'
[Skin] Processing screen: MovieSelection
[Skin] Processing screen: MovieSelectionSummary
[eServiceMP3] stop /hdd/movie/kinderprogramma/Sarah & Duck/Acarde Dance Off.mkv
[eServiceMP3] stop state:PLAYING pending:VOID_PENDING ret:SUCCESS
[eDVBDB] getBouquet failed.. no path given!
service end!
Edited by bramjacobse, 25 January 2019 - 16:20.
-
DM8000 + QNAP 639 NFS share
DM8000 + QNAP 639 NFS share
Re: MKV speelt niet in openpli 7 wel in openpli 6 #32
-
- Senior Member
- 88 posts
0
Neutral
Posted 25 January 2019 - 22:19
In develop versie is het opgelost, Heren Dank..!
Kan de DM8000 nog even mee. :-)
---------
[eServiceMP3] playbin uri=file:///hdd/movie/kinderprogramma/Sarah%20&%20Duck/Acarde%20Dance%20Off.mkv
[eServiceMP3] starting pipeline
[Skin] Processing screen: MoviePlayer
[Skin] Processing screen: InfoBarMoviePlayerSummary
[eServiceMP3] state transition NULL -> READY
[eServiceMP3] state transition READY -> PAUSED
[eDVBDB] getBouquet failed.. no path given!
[eDVBDB] getBouquet failed.. no path given!
resolved to PLAY
[eServiceMP3] trickSeek no need to unpause!
new service started! trying to download cuts!
seekable.getLength() returns: [0, 37730177]
[Skin] Processing screen: MessageBoxSimple
warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Resuming playback)
[Skin] Processing screen: MessageBoxSimple_summary
RemovePopup, id = ZapError
[eServiceMP3] loading cuesheet
[eServiceMP3] cutfile not found!
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
Timeout!
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
[ActionMap] Keymap 'InfobarAudioSelectionActions' -> Action = 'audioSelection'
[Skin] Processing screen: AudioSelection
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[eServiceMP3] getSubtitleList finished
[Skin] Processing screen: SimpleSummary
[ActionMap] Keymap 'DirectionActions' -> Action = 'down'
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'SetupActions' -> Action = 'ok'
[eServiceMP3] switched to audio stream 1
[eServiceMP3] getSubtitleList finished
[infobar::audioSelected] 0
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
[ActionMap] Keymap 'InfobarAudioSelectionActions' -> Action = 'audioSelection'
[Skin] Processing screen: AudioSelection
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[eServiceMP3] getSubtitleList finished
[Skin] Processing screen: SimpleSummary
[ActionMap] Keymap 'DirectionActions' -> Action = 'up'
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'upUp'! (Typo in keymap?)
[ActionMap] Keymap 'SetupActions' -> Action = 'ok'
[eServiceMP3] switched to audio stream 0
[eServiceMP3] getSubtitleList finished
[infobar::audioSelected] 0
[eServiceMP3] async-done - 1 video, 2 audio, 0 subtitle
[eServiceMP3] AUDIO STRUCT=audio/x-eac3
[eServiceMP3] audio stream=0 codec=E-AC-3 audio language=und
[eServiceMP3] AUDIO STRUCT=audio/mpeg
[eServiceMP3] audio stream=1 codec=MPEG-1 Layer 2 (MP2) language=und
[eServiceMP3] state transition PAUSED -> PLAYING
[ActionMap] Keymap 'MoviePlayerActions' -> Action = 'leavePlayerOnExit'
[Skin] Processing screen: MessageBoxSimple
warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Exit movie player?)
[Skin] Processing screen: MessageBoxSimple_summary
[ActionMap] Keymap 'MsgBoxActions' -> Action = 'ok'
[eDVBDB] getBouquet failed.. no path given!
[eDVBDB] getBouquet failed.. no path given!
playing None
[eServiceMP3] stop /hdd/movie/kinderprogramma/Sarah & Duck/Acarde Dance Off.mkv
[eServiceMP3] stop state:PLAYING pending:VOID_PENDING ret:SUCCESS
[eDVBDB] getBouquet failed.. no path given!
[eServiceMP3] destruct!
-
DM8000 + QNAP 639 NFS share
DM8000 + QNAP 639 NFS share
Re: MKV speelt niet in openpli 7 wel in openpli 6 #33
-
- PLi® Core member
- 70,204 posts
+1,798
Excellent
Posted 25 January 2019 - 22:48
Fix gebackport naar 7.0-release, dus hij moet met de build van maandag in de image zitten.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #34
-
- Senior Member
- 4,774 posts
+69
Good
Posted 26 January 2019 - 11:56
Wat is of was het probleem dan ?
Groetjes Cobus R
VU+ UNO 4K SE FBC DVB-C (8x)
MUTANT HD66SE FBC DVB-C (3x)
MAXYTEC MULTIBOX COMBO
MUTANT HD60 DVB-S
Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner
Re: MKV speelt niet in openpli 7 wel in openpli 6 #35
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 26 January 2019 - 12:09
Een aanpassing voor een DMM-quirk die er wel stond maar niet actief was.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #36
-
- Senior Member
- 4,774 posts
+69
Good
Posted 26 January 2019 - 16:43
Ok Thanks 
Groetjes Cobus R
VU+ UNO 4K SE FBC DVB-C (8x)
MUTANT HD66SE FBC DVB-C (3x)
MAXYTEC MULTIBOX COMBO
MUTANT HD60 DVB-S
Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner
Re: MKV speelt niet in openpli 7 wel in openpli 6 #37
-
- Senior Member
- 88 posts
0
Neutral
Posted 29 January 2019 - 14:46
Nieuwe Release openpli-7.0-release-dm8000-20190128.zip werkt..:-), Dank
Edited by bramjacobse, 29 January 2019 - 14:47.
-
DM8000 + QNAP 639 NFS share
DM8000 + QNAP 639 NFS share
Re: MKV speelt niet in openpli 7 wel in openpli 6 #38
-
- Senior Member
- 1,490 posts
+47
Good
Posted 29 January 2019 - 14:52
Net te laat,
Nieuwe release 28-1 werkt weer prima,, nogmaals bedankt..
Vu+DUO4K, (DVB-C FBC & DVB-S2X FBC twin tuner), OpenPLi Nightly Build, My-FullNightHD skin, Bluetooth remote,
2x Synology DS-116, 16 Gb USB3, Autotimer, Bitrate, EPG-Import, Ziggo Kabel-tv, Astra 28.2.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #39
-
- PLi® Core member
- 70,204 posts
+1,798
Excellent
Posted 29 January 2019 - 16:41
Mooi, merci voor de terugmelding!
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: MKV speelt niet in openpli 7 wel in openpli 6 #40
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 29 January 2019 - 17:58
Ok Thanks
Dank Wanwizard maar, die heeft er aardig wat tijd in gestoken! Ik gaf alleen door hier.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
