13 replies to this topic

[gybeset]

Hi

Now i have three dm boxes Dm600 Dm 800 and 7025+ only DM600 works. Please i would like to have some help with *iasat card to work with these wo other boxes. How to configure cccam.cfg to get it running.

[WanWizard]

Check the (default) config file, CCcam.cfg. It is full of examples.

On the box with the card you need a {F} line, on the box you want to connect with, a {C} line. Make sure that every {F} line has a unique userid/password, and that the userid and password match for every {F} and {C} combination.

There's not more to it...

[gybeset]

Hi

thi my config now:

F: 1235 1235 0 1 1 { 0b00-000000 } olo 192.168.1.65 12000
F: 1235 1235 0 1 1 ( 090f:000000 ) olo 192.168.1.65 12001
#


######################################################################
# connections #
######################################################################
# syntax for to add a client connection to other CCcam
# add yes on end to use friends emus (non public private key/emu,etc...),
# but only works when corresponding F line on server has '1' for <shareemus>
# optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)
#
#C: <hostname> <port> <username> <password> <wantemus> ( { caid:id(:uphops), caid:id(:uphops), ... } )
#
#note: if {} limits are added, <wantemus> cannot be omitted. Use either yes or no.
#
# example:
#
# C: someserver.somedomain 12000 user1 pass1
C: 192.168.1.65 12000 1235 1235 yes
C: 192.168.1.65 12001 1235 1235 yes

and still no picture!

[WanWizard]

I see several errors. You are using the same userid (1235) for multiple boxes. That is not going to work. You are using port 12001, but is that defined on that other box?

If you change the fake IP addresses below to the real ones, it should work without any problem:

DM600: ip 1.1.1.1, username: DM600u, password DM600p
DM800: ip 2.2.2.2, username: DM800u, password DM800p
DM7025: ip 3.3.3.3, username: DM7025u, password DM7025p

On the DM600 you should config:

F: DM600u DM600p  1 1 0 { }
F: DM800u DM800p  1 1 0 { }
F: DM7025u DM7025p  1 1 0 { }

C: 2.2.2.2 12000 DM800u  DM800p yes
C: 3.3.3.3 12000 DM7025u DM7025p no

On the DM800 you should config:

F: DM600u DM600p  1 1 0 { }
F: DM800u DM800p  1 1 0 { }
F: DM7025u DM7025p  1 1 0 { }

C: 1.1.1.1 12000 DM600u  DM600p yes
C: 3.3.3.3 12000 DM7025u DM7025p no

On the DM7025 you should config:

F: DM600u DM600p  1 1 0 { }
F: DM800u DM800p  1 1 0 { }
F: DM7025u DM7025p  1 1 0 { }

C: 1.1.1.1 12000 DM600u  DM600p yes
C: 2.2.2.2 12000 DM800u  DM800p yes

There is nothing more you it. You are not stating which box actually holds your card. You can remove any C: lines that point to an IP address of a box that doesn't have any cards.

If need be you can start CCcam manually from the commandline with the -D parameter. That starts it in debug mode, and you will see all connects (or failures) on your screen.

[gybeset]

ok this is what i get now from commandline

21:01:43.372 CCcam: ============================================================ ==========
21:01:43.376 CCcam: starting CCcam 2.0.9 compiled on May 17 2008@15:56:00
21:01:43.377 CCcam: ============================================================ ==========
21:01:43.378 CCcam: online using nodeId d32f789ded7a9fe6
21:01:43.388 CCcam: dvb api3 detected
21:01:43.390 CCcam: DM7025 detected
21:01:43.391 CCcam: create 8 cam device(s)
21:01:43.396 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
21:01:43.397 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
21:01:43.398 CCcam: static cw not found or bad
21:01:43.399 CCcam: parsed 0 entries from /var/etc/CCcam.prio
21:01:43.400 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or no t found
21:01:43.402 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or n ot found
21:01:43.402 CCcam: server started on port 12000
21:01:43.421 CCcam: no working cam devices, no need to start pmthandler

[littlesat]

In this case another thread of CCcam or another emu is running. Please try e.g. a killall -9 CCcam first

[gybeset]

ok now i got this


21:18:02.650 CCcam: starting CCcam 2.0.9 compiled on May 17 2008@15:56:00
21:18:02.651 CCcam: ======================================================================
21:18:02.652 CCcam: online using nodeId 7a74b61141d3be80
21:18:02.661 CCcam: dvb api3 detected
21:18:02.663 CCcam: DM7025 detected
21:18:02.664 CCcam: create 8 cam device(s)
21:18:03.100 CCcam: card detect fail
21:18:03.269 CCcam: dreamcrypt card found
21:18:03.539 CCcam: card added to broker with caid 4a70
21:18:03.540 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
21:18:03.542 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
21:18:03.543 CCcam: static cw not found or bad
21:18:03.544 CCcam: parsed 0 entries from /var/etc/CCcam.prio
21:18:03.545 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
21:18:03.545 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
21:18:03.546 CCcam: server started on port 12000
21:18:03.555 CCcam: new tcp client from 192.168.1.65
21:18:03.559 CCcam: user DM7025u login attempt from 192.168.1.65
21:18:03.560 CCcam: client DM7025u@7a74b61141d3be80, running CCcam 2.0.9
21:18:03.563 CCcam: 0 cards --> client 192.168.1.65(DM7025u)
21:18:03.568 CCcam: found nds caid: 0x90f ecmpid: 0x13c2 id: 0x0
21:18:03.570 CCcam: cam[0] set PMT for sid=13ba
21:18:03.573 CCcam: start EMM
21:18:03.578 CCcam: EMM demux 1 set
21:18:03.579 CCcam: EMM: not interested in 090F:000000
21:18:03.659 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:03.750 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:03.862 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:03.922 CCcam: card detect fail
21:18:05.295 CCcam: card detect fail
21:18:06.668 CCcam: card detect fail
21:18:08.041 CCcam: card detect fail
21:18:08.879 CCcam: cam[0] ecm odd nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:08.982 CCcam: cam[0] ecm odd nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:09.072 CCcam: cam[0] ecm odd nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:09.414 CCcam: card detect fail
21:18:10.787 CCcam: card detect fail
21:18:12.160 CCcam: card detect fail
21:18:13.533 CCcam: card detect fail
21:18:14.906 CCcam: card detect fail
21:18:16.279 CCcam: card detect fail
21:18:16.669 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:16.773 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:16.858 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:17.654 CCcam: card detect fail
21:18:19.027 CCcam: card detect fail
21:18:20.400 CCcam: card detect fail
21:18:21.773 CCcam: card detect fail
21:18:23.146 CCcam: card detect fail
21:18:24.519 CCcam: card detect fail
21:18:25.892 CCcam: card detect fail
21:18:26.652 CCcam: cam[0] ecm odd nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:26.741 CCcam: cam[0] ecm odd nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:26.839 CCcam: cam[0] ecm odd nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:27.265 CCcam: card detect fail
21:18:28.638 CCcam: card detect fail
21:18:30.011 CCcam: card detect fail
21:18:31.384 CCcam: card detect fail
21:18:32.757 CCcam: card detect fail
21:18:34.130 CCcam: card detect fail
21:18:35.503 CCcam: card detect fail
21:18:36.618 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:36.721 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:36.818 CCcam: cam[0] ecm even nok caid:0x90f id:0x0 pid:0x13c2 Unknown
21:18:36.876 CCcam: card detect fail
21:18:38.249 CCcam: card detect fail
q21:18:39.622 CCcam: card detect fail
21:18:40.995 CCcam: card detect fail

[gybeset]

hi
to make this clear now

i am now trying to set up dm7025+ only
the card is in slot

no other boxes aren't configured yet. i would like to have this 7025+ running first

[littlesat]

The communication to your card is not successfull. Is this related to a Viasat NDS card? If yes it schould work normally???

[pieterg]

my advise, don't use the 7025 (nor 800) cardreaders. They suck.
Use the 600 cardreader, especially when a card doesn't work in the 7025

[gybeset]

the card is viasat nds card

[gybeset]

hi
using my first box dm600 as cardreader in future will be a problem i have two fullhd tv:s and these will be run by dm 800 full hd boxes. Is there any solutions to get this work?

i am very gratefull for all the help you give with this.

its a litle bit funny when you buy i satellite receiver which doesn't work with all cards....

[pieterg]

hi
using my first box dm600 as cardreader in future will be a problem i have two fullhd tv:s and these will be run by dm 800 full hd boxes. Is there any solutions to get this work?

See the solution people have been trying to explain to you above; let the 800 connect to the 600.

its a litle bit funny when you buy i satellite receiver which doesn't work with all cards....

Well, officially it only supports the dreamcrypt card.

[gybeset]

ok

thanks for everything!