Jump to content


Photo

OpenPLi 7.1 - Stable release


  • Please log in to reply
214 replies to this topic

Re: OpenPLi 7.1 - Stable release #21 kalehrl

  • Senior Member
  • 476 posts

+8
Neutral

Posted 30 June 2019 - 15:13

Updated our Xtrend 9200 to the new 7.1 image. All is working well but i have one question.

Considering this is the very latest images why is it again not possible to install the Mediaportal plugin?

I have spent a long time trying but no luck. Is it possible? Thank you in advance for any help.

Remove samba and webinterface to gain a significant amount of space in flash.



Re: OpenPLi 7.1 - Stable release #22 zigzag

  • Senior Member
  • 174 posts

0
Neutral

Posted 1 July 2019 - 10:48

I will try this. Thank you.

From where do i remove these? 

From Remove Plugins/Extensions or OpenPli Plugins?



Re: OpenPLi 7.1 - Stable release #23 WanWizard

  • PLi® Core member
  • 70,376 posts

+1,807
Excellent

Posted 1 July 2019 - 14:13

Before you start fiddling, perhaps first confirm you can't install it because a lack of space?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.1 - Stable release #24 dudule22

  • Senior Member
  • 325 posts

+4
Neutral

Posted 6 July 2019 - 08:08

On WIFI mode DNS are lost after a reboot.

If you install a new image in wifi mode, the backup is impossible, because the WIFI is deactivated.

On 2160 p 30 Hz, sometime it is necessary to reselect this mode because the screen dimensions are bad.

On DUO 4K only this video mode is working.



Re: OpenPLi 7.1 - Stable release #25 bestman22

  • Member
  • 13 posts

0
Neutral

Posted 6 July 2019 - 08:50

For me , I always do online update and everything is Ok. 



Re: OpenPLi 7.1 - Stable release #26 WanWizard

  • PLi® Core member
  • 70,376 posts

+1,807
Excellent

Posted 6 July 2019 - 15:29

On WIFI mode DNS are lost after a reboot.

If you install a new image in wifi mode, the backup is impossible, because the WIFI is deactivated.

 

We are aware of this, it is on the todo list.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.1 - Stable release #27 dudule22

  • Senior Member
  • 325 posts

+4
Neutral

Posted 7 July 2019 - 16:42

On WIFI mode DNS are good in fact after reboot.

It was a baxkup problem (error saved in backup)

With a new configuration it is OK.



Re: OpenPLi 7.1 - Stable release #28 andelun

  • Member
  • 16 posts

0
Neutral

Posted 8 July 2019 - 16:09

I can't flash OpenpLi 7.1 on my Formuler F1. Don't know what to do, please help.

I followed the instructions at https://wiki.openpli...ivers:Formuler:

  1. - I downloaded and unzipped the OpenPLi 7.1 release for Formuler F1. I now have a folder named 'formuler1' and inside it are 4 files ('imageversion', 'kernel.bin', 'noforce' and 'rootfs.bin'). 
  2. - changed 'noforce' tot 'force' In order to load the image automagically.
  3. - formatted an USB stick (2.1Gb) to FAT32
  4. - copied the OpenPLi 7.1 release to the stick
  5. - powered off the receiver
  6. -inserted the usb stick into the rear port (and ensured no other usb devices are plugged in)
  7. -powered the receiver on.

After booting no flashing, I'm still stuck with OpenPLi 4.7

 

I tried to insert the usb stick into the back port, no effect.

I copied the OpenPLi release to a HD, formatted ext4, no effect.

 

How can I flash this release?

 

Thank you,

André



Re: OpenPLi 7.1 - Stable release #29 dog-man

  • Senior Member
  • 419 posts

+2
Neutral

Posted 8 July 2019 - 16:27

Try a different brand or size usb. Some work, some don't.

 

What format is the usb in?

 

I am not sure if that matters but it might need to be a specific format such as Fat32.


Edited by dog-man, 8 July 2019 - 16:28.


Re: OpenPLi 7.1 - Stable release #30 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,954 posts

+191
Excellent

Posted 8 July 2019 - 16:32

Why not flash from the menu, with a backup in the root or use the USB stick as the medium where the backup and/or the image is saved => https://wiki.openpli...mage_support.29


Edited by 40H3X, 8 July 2019 - 16:32.

Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: OpenPLi 7.1 - Stable release #31 WanWizard

  • PLi® Core member
  • 70,376 posts

+1,807
Excellent

Posted 8 July 2019 - 17:22

He has "OpenPLi 4.7" installed. Not sure what that is, but I assume it doesn't have that feature. ;)


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.1 - Stable release #32 andelun

  • Member
  • 16 posts

0
Neutral

Posted 9 July 2019 - 08:35

Thanks for your reactions. OpenPLi 4.7 is the kernel version of OpenPLi 4  installed early 2017.

OpenPLi 4 indeed doesn/t have that feature.

I tried using 2 types of USB sticks and 1 Scandisc 8 Gb. All formatted FAT32.

 

My Formuler F1 can read these sticks and Scandisc as when I store a movie file at them I can play the movie.

But when I only have the OpenPLi 7 flash files at them Formuler says 'no files'. Probably because these can't be played.

 

I'll by another type of stick and try again.

When I unzipped the OpenPLi download there was a folder named 'formuler' and inside it where the files. Am I correct that I have to store the folder with files at the root of the USB stick?



Re: OpenPLi 7.1 - Stable release #33 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,489 posts

+397
Excellent

Posted 9 July 2019 - 08:59

Exactly

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: OpenPLi 7.1 - Stable release #34 darwinism

  • Member
  • 4 posts

0
Neutral

Posted 9 July 2019 - 12:19

Everything working fine after online update, thank you for your effort

 

Zgemma H7S


Edited by darwinism, 9 July 2019 - 12:19.


Re: OpenPLi 7.1 - Stable release #35 andelun

  • Member
  • 16 posts

0
Neutral

Posted 14 July 2019 - 08:02

Still not installing.

I installed Rufus on a pc (Windows 10) and formatted some USB sticks. It turned out 1 stick had faulty blocks. Another stick was OK and I formatted it to FAT32 using Rufus.

Then I took the usual steps.

Copied the folder 'formuler1' and my backup of OpenPLi 4 to the stick.Turned of the power of Formuler1. Inserted the stick into the rear. Powered the receiver.

Then when booting after a few secs I saw the OpenPLi 4 start-up screen​, the screen went black for a ssecond and then a tv-programm showed.

 

Is there something wrong in the steps I take?



Re: OpenPLi 7.1 - Stable release #36 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,489 posts

+397
Excellent

Posted 14 July 2019 - 08:40

I am not near a PC nor owe a F1 but I assume you have to push a button right after power up.
If not, you might check whether a file called noforce in the package / on the stick and rename this to force. Then power up the box again and the flashing should start.

Flashing the Receiver.
1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the USB ports on the receiver, rear USB port is advised if possible.
4) Power the receiver on.
5) When the receiver powers up you will prompted on the receiver’s front display.
6) As soon as you see this press the power button to the left side of the receiver to start the flashing process.
7) If successful the receiver will reboot it self after the flashing process has completed.
8) Remove USB stick that contains the images files.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: OpenPLi 7.1 - Stable release #37 fred

  • Member
  • 11 posts

0
Neutral

Posted 14 July 2019 - 09:42

Do not use Rufus to format but the normal win feature.



Re: OpenPLi 7.1 - Stable release #38 andelun

  • Member
  • 16 posts

0
Neutral

Posted 17 July 2019 - 22:09

​Problem solved. Thanks all.

I took the box to a friend who has a pc and copied the installer folder to the usb stick. Then connected this stick to my formuler1 and flashing the installer went ok.

I guess the problem has to do with using a mac to copy the installer file to the usb stick. mac writes probably some invisible files that disturb the flashing process.

Thanks again.



Re: OpenPLi 7.1 - Stable release #39 fred

  • Member
  • 11 posts

0
Neutral

Posted 18 July 2019 - 09:20

That is exactly what Rufus does, so do not use it for this.



Re: OpenPLi 7.1 - Stable release #40 FRAP

  • Senior Member
  • 331 posts

+23
Neutral

Posted 20 July 2019 - 14:58

Hello! The new version of Lcd4linux plugin is out. Please add it to the build.

 

Lcd4linux 5.0r5

- kleines Updaterollup
- Tuner 2zeilig


Alcohol for wimps. Strong people enjoy depression.



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users