Posted 20 August 2019 - 16:36
Je bedoelt dat de transcoding plugin en de streamproxy ontbreekt?
Daarvoor moet "transcoding" aan de MACHINE_FEATURES in de BSP toegevoegd worden, dus dat moet in een local test build getest worden, en als dat inderdaad zo is, dan moet de fabrikant een schopje krijgen om het aan te passen...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 20 August 2019 - 18:01
Ik ben bang dat daar even iets mee getest mag gaan worden, in elk geval staat die in de BSP niet als feature toegevoegd
MACHINE_FEATURES += "textlcd dvbproxy dvb-c"
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message 
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 20 August 2019 - 19:13
Ik heb even een image gebouwd en die optie toegevoegd en zie dan wel het transcoding icon in de webinterface, er zal een verzoek naar de fabrikant moeten om dit voor de officiele builds ook werkend te krijgen.
Ik moest de streamproxy wel even met de hand installeren vanuit de feeds maar uiteindelijk werkt het wel
De BSP zal dus aangepast moeten worden in
MACHINE_FEATURES += "textlcd dvbproxy dvb-c transcoding streamproxy"
Xsarius Galaxy4K OpenWebif.png 302.14KB
6 downloads
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 21 August 2019 - 17:21
Als "streamproxy" ook in de MACHINE_FEATURES staat moet met de hand installeren niet meer nodig zijn.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 August 2019 - 10:12
Je bedoelt dat de transcoding plugin en de streamproxy ontbreekt?
Daarvoor moet "transcoding" aan de MACHINE_FEATURES in de BSP toegevoegd worden, dus dat moet in een local test build getest worden, en als dat inderdaad zo is, dan moet de fabrikant een schopje krijgen om het aan te passen...
wat zei de fabrikant naar het schopje
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 24 August 2019 - 10:27
die schop moet helemaal naar Azië, dat duurt in sommige gevallen nogal lang.......
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 25 August 2019 - 23:18
ik heb nog een probleem als ik een nfs mount maak met ( Voeg een nieuwe netwerkmount toe ) of via de ( netwerkbrowser ) werkt deze op een synology ( op een hd2400 geen problemen mee gehad )
maar als ik een reboot doe van de ontvanger werkt deze mount niet meer
maar gebruik ik de optie Mount opnieuw werkt het weer
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 25 August 2019 - 23:54
DHCP in gebruik? Zo ja, configureer dan eens een vast IP adres, het kan zijn dat Enigma sneller start dan dat er netwerk beschikbaar is...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 August 2019 - 19:20
DHCP in gebruik? Zo ja, configureer dan eens een vast IP adres, het kan zijn dat Enigma sneller start dan dat er netwerk beschikbaar is...
de ontvanger een vast ipadres gegeven een reboot probleem blijft
software update gedaan probleem blijft
als ik ( Mount opnieuw ) doe is het probleem opgelost tot ik een reboot doe dan is de mount weer verdwenen
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 26 August 2019 - 19:56
Ok, dat is dat geelimineerd.
Als je bedreven bent met het aanpassen van bestanden op de box, dan kun je de regel
DEBUG_LVL=3
in /usr/bin/enigma2.sh aanpassen naar
DEBUG_LVL=4
en daarna de box herstarten.
Dat maakt een enigma debug log aan in /home/root, waarin we meer zouden moeten kunnen zien.
Niet vergeten het daarna weer terug aan te passen, anders loopt je flash vol met logfiles.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 August 2019 - 22:13
Ok, dat is dat geelimineerd.
Als je bedreven bent met het aanpassen van bestanden op de box, dan kun je de regel
DEBUG_LVL=3in /usr/bin/enigma2.sh aanpassen naar
DEBUG_LVL=4en daarna de box herstarten.
Dat maakt een enigma debug log aan in /home/root, waarin we meer zouden moeten kunnen zien.
Niet vergeten het daarna weer terug aan te passen, anders loopt je flash vol met logfiles.
Jan 1 01:00:14 galaxy4k syslog.info syslogd started: BusyBox v1.24.1
Jan 1 01:00:14 galaxy4k user.notice kernel: klogd started: BusyBox v1.24.1 (2019-06-18 22:07:20 CEST)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] Linux version 3.14.28 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Thu Jun 20 12:24:14 CEST 2019
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] Machine model: BCM97252SSAT_V00
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] moving dtb from 0x0000000007628000 to 0x0000000000929bb0
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] cma: Reserved 504 MiB at 0x0000000010000000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] cma: Reserved 260 MiB at 0x000000002f800000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] cma: Reserved 1020 MiB at 0x0000000080000000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] On node 0 totalpages: 524288
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c08ea4c0, node_mem_map cd7f2000
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] Normal zone: 512 pages used for memmap
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] HighMem zone: 5632 pages used for memmap
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] HighMem zone: 458752 pages, LIFO batch:31
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] MCP: Enabling write pairing
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] PERCPU: Embedded 8 pages/cpu @cd7c0000 s9536 r8192 d15040 u32768
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] pcpu-alloc: s9536 r8192 d15040 u32768 alloc=8*4096
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523776
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootwait rw rootwait=data=journal debug,nolock coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1020M@0x80000000 hwtypenum=262
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 0.000000] Memory: 219500K/2097152K available (6532K kernel code, 342K rwdata, 2004K rodata, 265K init, 200K bss, 34452K reserved, 1843200K cma-reserved, 0K highmem)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] Virtual kernel memory layout:
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] .text : 0xc0008000 - 0xc085e5fc (8538 kB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] .init : 0xc085f000 - 0xc08a1540 ( 266 kB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] .data : 0xc08a2000 - 0xc08f78f0 ( 343 kB)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.000000] .bss : 0xc08f78f8 - 0xc0929bb0 ( 201 kB)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] Hierarchical RCU implementation.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000008] Switching to timer-based delay loop
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000215] Console: colour dummy device 80x30
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000234] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000241] pid_max: default: 32768 minimum: 301
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000331] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.000337] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.005946] CPU: Testing write buffer coherency: ok
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.006151] CPU0: update cpu_power 1024
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.006156] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.006327] Setting up static identity map for 0x63cb90 - 0x63cbe8
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 0.008505] CPU1: Booted secondary processor
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.008524] CPU1: update cpu_power 1024
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.008526] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.008589] Brought up 2 CPUs
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.008599] SMP: Total of 2 processors activated.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.008602] CPU: All CPU(s) started in SVC mode.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.008944] devtmpfs: initialized
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.012331] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.039604] regulator-dummy: no parameters
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.039820] NET: Registered protocol family 16
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.041075] DMA: preallocated 2048 KiB pool for atomic coherent allocations
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.041801] cpuidle: using governor ladder
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.041808] cpuidle: using governor menu
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 0.044239] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 0.044374] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 0.047431] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 !
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.047660] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.047791] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.047942] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.048089] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.048219] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.048351] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.048473] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.048618] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.048744] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.048859] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.048988] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.049164] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 0.049691] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.050165] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.050310] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.050811] No ATAGs?
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.050828] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.050833] hw-breakpoint: maximum watchpoint size is 8 bytes.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.051005] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.065276] bio: create slab <bio-0> at 0
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.065866] SCSI subsystem initialized
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.066039] libata version 3.00 loaded.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.066394] usbcore: registered new interface driver usbfs
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.066478] usbcore: registered new interface driver hub
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.066564] usbcore: registered new device driver usb
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.066677] Linux video capture interface: v2.00
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.066868] pps_core: LinuxPPS API ver. 1 registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.066872] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.066922] PTP clock support registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.067740] Advanced Linux Sound Architecture Driver Initialized.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.068418] cfg80211: Calling CRDA to update world regulatory domain
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.068915] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.069095] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.169396] brcm-pci f0460000.pcie: link down
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.269420] brcm-pci f0490000.pcie: link down
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.269461] Switched to clocksource arch_sys_counter
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.269611] FS-Cache: Loaded
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.277524] NET: Registered protocol family 2
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.277883] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.277898] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.277919] TCP: Hash tables configured (established 2048 bind 2048)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.277963] TCP: reno registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.277969] UDP hash table entries: 256 (order: 1, 8192 bytes)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.277980] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.278078] NET: Registered protocol family 1
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.278249] RPC: Registered named UNIX socket transport module.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.278254] RPC: Registered udp transport module.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.278257] RPC: Registered tcp transport module.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.278260] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 01:00:14 galaxy4k user.debug kernel: [ 0.278267] PCI: CLS 0 bytes, default 64
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.278533] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.279568] futex hash table entries: 512 (order: 3, 32768 bytes)
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 0.285579] bounce pool size: 64 pages
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.291361] FS-Cache: Netfs 'nfs' registered for caching
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.291695] NFS: Registering the id_resolver key type
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.291716] Key type id_resolver registered
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.291720] Key type id_legacy registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.291730] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.291734] Installing knfsd (copyright © 1996 okir@monad.swb.de).
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.291959] FS-Cache: Netfs 'cifs' registered for caching
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 0.292185] Key type cifs.spnego registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.292333] fuse init (API version 7.22)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.292902] SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.294141] msgmni has been set to 460
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.294788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.294795] io scheduler noop registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.294810] io scheduler cfq registered (default)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.295049] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.361855] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.362416] brcm-cma brcm-cma.0: Added CMA device @ PA=0x10000000 LEN=0x1f800000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.372896] brcm-cma brcm-cma.0: Pre-allocated 0x1f800000 bytes @ 0x10000000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.373485] brcm-cma brcm-cma.1: Added CMA device @ PA=0x2f800000 LEN=0x10400000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.378977] brcm-cma brcm-cma.1: Pre-allocated 0x10400000 bytes @ 0x2f800000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.379566] brcm-cma brcm-cma.2: Added CMA device @ PA=0x80000000 LEN=0x3fc00000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.399121] brcm-cma brcm-cma.2: Pre-allocated 0x3fc00000 bytes @ 0x80000000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.399575] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 1 01:00:14 galaxy4k user.info kernel: [ 0.401099] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.263541] console [ttyS0] enabled
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.267429] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.276751] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.291043] brd: module loaded
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.296664] loop: module loaded
Jan 1 01:00:14 galaxy4k user.err kernel: [ 1.300454] ahci brcmstb-ahci.0: can't get clock
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.305173] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.322478] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.331106] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.340600] scsi0 : ahci_platform
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.344231] scsi1 : ahci_platform
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.347765] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.355696] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.364874] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.371273] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 1.378587] m25p80 spi32766.0: found gd25q32, expected m25p80
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.384365] m25p80 spi32766.0: gd25q32 (4096 Kbytes)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 1.389358] 5 ofpart partitions found on MTD device spi32766.0
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 1.395201] Creating 5 MTD partitions on "spi32766.0":
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 1.400350] 0x000000000000-0x000000200000 : "flash0.bolt"
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 1.406423] 0x000000200000-0x000000210000 : "flash0.macadr"
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 1.412619] 0x000000210000-0x000000220000 : "flash0.nvram"
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 1.418698] 0x000000220000-0x000000230000 : "flash0.devtree"
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 1.424934] 0x000000000000-0x000000400000 : "flash0"
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.431426] libphy: Fixed MDIO Bus: probed
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.436198] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.453472] libphy: bcmgenet MII bus: probed
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.477478] ata1: SATA link down (SStatus 0 SControl 300)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.484109] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.489959] e1000e: Copyright© 1999 - 2013 Intel Corporation.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.496406] xhci-brcm: xHCI BRCM driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.500353] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.506236] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.514332] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.520993] hub 1-0:1.0: USB hub found
Jan 1 01:00:14 galaxy4k user.err kernel: [ 1.524773] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.532035] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.537837] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.546090] hub 2-0:1.0: USB hub found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.549862] hub 2-0:1.0: 2 ports detected
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.554235] ehci-brcm: EHCI BRCM driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.558160] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.563976] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.581942] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.593472] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.600098] hub 3-0:1.0: USB hub found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.603873] hub 3-0:1.0: 1 port detected
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.608008] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.613812] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.614478] ata2: SATA link down (SStatus 0 SControl 300)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.637160] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.648468] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.655252] hub 4-0:1.0: USB hub found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.659027] hub 4-0:1.0: 1 port detected
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.663262] ohci-brcm: OHCI BRCM driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.667178] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.672992] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.680871] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.741913] hub 5-0:1.0: USB hub found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.745686] hub 5-0:1.0: 1 port detected
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.749804] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.755619] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.763540] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.824885] hub 6-0:1.0: USB hub found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.828656] hub 6-0:1.0: 1 port detected
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.832868] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.839415] ehci-pci: EHCI PCI platform driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.843948] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.850164] ohci-pci: OHCI PCI platform driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.854907] usbcore: registered new interface driver usb-storage
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.861073] mousedev: PS/2 mouse device common for all mice
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.867011] i2c /dev entries driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.870835] IR NEC protocol handler initialized
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.875376] IR RC5(x) protocol handler initialized
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.880175] IR RC6 protocol handler initialized
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.884714] IR JVC protocol handler initialized
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.889251] IR Sony protocol handler initialized
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.893895] IR RC5 (streamzap) protocol handler initialized
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.899481] IR SANYO protocol handler initialized
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.904192] IR MCE Keyboard/mouse protocol handler initialized
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 1.910218] cpufreq_cpu0: failed to get cpu0 regulator: -19
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.916042] sdhci: Secure Digital Host Controller Interface driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.922233] sdhci: Copyright© Pierre Ossman
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.926596] sdhci-pltfm: SDHCI platform and OF driver helper
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.933395] mmc0: no vqmmc regulator found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.937503] mmc0: no vmmc regulator found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.972470] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.980945] mmc1: no vqmmc regulator found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 1.985050] mmc1: no vmmc regulator found
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.020470] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.028128] hidraw: raw HID events driver © Jiri Kosina
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.033858] usbcore: registered new interface driver usbhid
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.039442] usbhid: USB HID core driver
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.047571] TCP: cubic registered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.054414] NET: Registered protocol family 10
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.059328] NET: Registered protocol family 17
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 2.064048] Key type dns_resolver registered
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 2.068433] Registering SWP/SWPB emulation handler
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.073623] regulator-dummy: disabling
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.081677] ALSA device list:
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.084659] No soundcards found.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.088378] Waiting for root device /dev/mmcblk0p4...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.096128] mmc1: BKOPS_EN bit is not set
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.106360] mmc1: new high speed MMC card at address 0001
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.112101] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.116730] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.122737] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.128744] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.137520] mmcblk0: p1 p2 p3 p4
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.142356] mmcblk0boot1: unknown partition table
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.147756] mmcblk0boot0: unknown partition table
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.201109] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.209235] VFS: Mounted root (ext4 filesystem) on device 179:4.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.219157] devtmpfs: mounted
Jan 1 01:00:14 galaxy4k user.info kernel: [ 2.222248] Freeing unused kernel memory: 264K (c085f000 - c08a1000)
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 2.749898] Platform init...
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 3.581724] Platform init... ok.
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 3.614468] [Front Version = 40]
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 3.617712] >> No hwtype = 6
Jan 1 01:00:14 galaxy4k user.info kernel: [ 3.644203] input: GALAXY 4K remote control (native) as /devices/virtual/input/input0
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 3.661336] GALAXY 4K Linux DVB BCM73xx CI Driver Release Time (02/05/19)
Jan 1 01:00:14 galaxy4k user.notice kernel: [ 3.734430] random: nonblocking pool is initialized
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 4.314673] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 4.321216]
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 4.323792] BKNI_Malloc(linuxkernel) top users:
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 4.323792] blocks, bytes, filename:line
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 4.332766]
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 4.334262] 966, 205800, ../BSEAV/lib/utils/balloc.c:31
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 4.340189]
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 5.050488] scanning fe...sp4580 dual cable.
Jan 1 01:00:14 galaxy4k user.info kernel: [ 5.098969] DVB: registering new adapter (bcmdvb-0)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.644739] (NULL device *): DVB: registering adapter 0 frontend 0 (BCM7252S DVB-S2)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.652858] tunercnt 0 name bcmdvb-0 adapter0
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.666101] DVB: registering new adapter (bcmdvb-1)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.803271] (NULL device *): DVB: registering adapter 1 frontend 1 (BCM7252S DVB-S2)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.811386] tunercnt 1 name bcmdvb-1 adapter1
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.816277] DVB: registering new adapter (bcmdvb-2)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.930593] (NULL device *): DVB: registering adapter 2 frontend 2 (BCM7252S DVB-S2)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.938622] tunercnt 2 name bcmdvb-2 adapter2
Jan 1 01:00:14 galaxy4k user.info kernel: [ 11.943293] DVB: registering new adapter (bcmdvb-3)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.051535] (NULL device *): DVB: registering adapter 3 frontend 3 (BCM7252S DVB-S2)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.059630] tunercnt 3 name bcmdvb-3 adapter3
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.064339] DVB: registering new adapter (bcmdvb-4)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.166126] (NULL device *): DVB: registering adapter 4 frontend 4 (BCM7252S DVB-S2)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.174162] tunercnt 4 name bcmdvb-4 adapter4
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.178844] DVB: registering new adapter (bcmdvb-5)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.284530] (NULL device *): DVB: registering adapter 5 frontend 5 (BCM7252S DVB-S2)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.292678] tunercnt 5 name bcmdvb-5 adapter5
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.297367] DVB: registering new adapter (bcmdvb-6)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.403899] (NULL device *): DVB: registering adapter 6 frontend 6 (BCM7252S DVB-S2)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.412047] tunercnt 6 name bcmdvb-6 adapter6
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.416741] DVB: registering new adapter (bcmdvb-7)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.522718] (NULL device *): DVB: registering adapter 7 frontend 7 (BCM7252S DVB-S2)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.530800] tunercnt 7 name bcmdvb-7 adapter7
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.535549] DVB: registering new adapter (bcmdvb-8)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.545219] (NULL device *): DVB: registering adapter 8 frontend 8 (SP4580 DVB-C)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.553534] tunercnt 8 name bcmdvb-8 adapter8
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.558580] DVB: registering new adapter (bcmdvb-9)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.572164] (NULL device *): DVB: registering adapter 9 frontend 9 (SP4580 DVB-C)...
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.582894] tunercnt 9 name bcmdvb-9 adapter9
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.589659] DVB: registering new adapter (bcmdvb-10)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.599571] DVB: registering new adapter (bcmdvb-11)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.612947] >>>vtuner0: register
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.620042] DVB: registering new adapter (bcmdvb-12)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.631673] DVB: registering new adapter (bcmdvb-13)
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.646593] DVB: registering new adapter (bcmdvb-14)
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 12.662348] Registering device 'sci', major '238'
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 12.671596] Version of smartcard driver: [1.0.0]
Jan 1 01:00:14 galaxy4k user.warn kernel: [ 12.835276] @@^!^@@
Jan 1 01:00:14 galaxy4k user.info kernel: [ 12.906431] EXT4-fs (mmcblk0p4): re-mounted. Opts: data=ordered
Jan 1 01:00:14 galaxy4k user.info kernel: [ 14.042472] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
Jan 1 01:00:14 galaxy4k user.info kernel: [ 14.053655] f0b00000.ethernet: configuring instance for internal PHY
Jan 1 01:00:14 galaxy4k user.info kernel: [ 14.060168] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Found user 'avahi' (UID 997) and group 'avahi' (GID 996).
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Successfully dropped root privileges.
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: avahi-daemon 0.6.32 starting up.
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Successfully called chroot().
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Successfully dropped remaining capabilities.
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Loading service file /services/sftp-ssh.service.
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Loading service file /services/ssh.service.
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.8.
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: New relevant interface eth0.IPv4 for mDNS.
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Network interface enumeration completed.
Jan 1 01:00:14 galaxy4k daemon.info avahi-daemon[1214]: Registering new address record for 192.168.1.8 on eth0.IPv4.
Jan 1 01:00:15 galaxy4k daemon.info avahi-daemon[1214]: Server startup complete. Host name is galaxy4k.local. Local service cookie is 1846469008.
Jan 1 01:00:16 galaxy4k user.info kernel: [ 16.055563] libphy: f0b00000.etherne:01 - Link is Down
Jan 1 01:00:16 galaxy4k daemon.info avahi-daemon[1214]: Service "galaxy4k" (/services/ssh.service) successfully established.
Jan 1 01:00:16 galaxy4k daemon.info avahi-daemon[1214]: Service "galaxy4k" (/services/sftp-ssh.service) successfully established.
Jan 1 01:00:17 galaxy4k user.info kernel: [ 17.328813] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
Jan 1 01:00:17 galaxy4k user.info kernel: [ 17.335339] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 1 01:00:18 galaxy4k daemon.info avahi-daemon[1214]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ec6:acff:fe02:ca5b.
Jan 1 01:00:18 galaxy4k daemon.info avahi-daemon[1214]: New relevant interface eth0.IPv6 for mDNS.
Jan 1 01:00:18 galaxy4k daemon.info avahi-daemon[1214]: Registering new address record for fe80::ec6:acff:fe02:ca5b on eth0.*.
Jan 1 01:00:21 galaxy4k user.warn kernel: [ 21.637401] no vt opened...
Jan 1 01:00:21 galaxy4k user.warn kernel: [ 21.640310] set source 0 bf85103c 0.
Jan 1 01:00:24 galaxy4k user.warn kernel: [ 24.909912] - HD_VideoClip out -
Aug 26 23:06:22 galaxy4k authpriv.err vsftpd: pam_listfile(vsftpd:auth): Couldn't open /etc/vsftpd.ftpusers
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 26 August 2019 - 22:25
Dat ziet er niet uit als een /home/root/enigma-*-debuglog, maar als /var/log/messages log?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 August 2019 - 22:59
Dat ziet er niet uit als een /home/root/enigma-*-debuglog, maar als /var/log/messages log?
als ik alleen enigma opnieuw opstart is er geen probleem maar dat was te verwachten
enigma.19700101.log 114.62KB
11 downloads
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 2 September 2019 - 09:49
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 2 September 2019 - 10:29
Iets wat mij opvalt, de tijd van je debug log is 1970, ik zou eens beginnen met er voor te zorgen dat de tijd goed staat (zie opmerking boven). kijk hier eens https://wiki.openpli...he_correct_time
connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
Waarom dit gebeurd, nog geen idee. I Trouwens je kunt sinds OpenPLi 7.1 debuggen vanuit het menu https://wiki.openpli...ebugging_Enigma
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 2 September 2019 - 14:00
Ja hoor bijna iedere dag.Zijn er nog ontwikkelingen ?
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 5 September 2019 - 16:13
Iets wat mij opvalt, de tijd van je debug log is 1970, ik zou eens beginnen met er voor te zorgen dat de tijd goed staat (zie opmerking boven). kijk hier eens https://wiki.openpli...he_correct_time
connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.Waarom dit gebeurd, nog geen idee. I Trouwens je kunt sinds OpenPLi 7.1 debuggen vanuit het menu https://wiki.openpli...ebugging_Enigma
heeft niks geholpen de systeemtime plugin ( welke instellingen kan ik het beste gebruiken ? )
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 17 September 2019 - 17:30
Ja hoor bijna iedere dag.Zijn er nog ontwikkelingen ?
En v.w.b. het transcoding issue is dat gemeld én dat zou opgepakt worden. Echter zal dat in Develop gebeuren en zodra er een 7.2 Release is dan is dat pas publiek beschikbaar. En helaas gaat daar tijd in zitten.
Gezien de tijd tussen de officiële Release datum en het gemelde issue is de druk niet heel groot. Kortom, het wordt / is mogelijk al opgelost maar het duurt nog even voordat jij dit zult merken.
ik heb nog een probleem als ik een nfs mount maak met ( Voeg een nieuwe netwerkmount toe ) of via de ( netwerkbrowser ) werkt deze op een synology ( op een hd2400 geen problemen mee gehad )
maar als ik een reboot doe van de ontvanger werkt deze mount niet meer
maar gebruik ik de optie Mount opnieuw werkt het weer
DHCP in gebruik? Zo ja, configureer dan eens een vast IP adres, het kan zijn dat Enigma sneller start dan dat er netwerk beschikbaar is...
de ontvanger een vast ipadres gegeven een reboot probleem blijft
software update gedaan probleem blijft
als ik ( Mount opnieuw ) doe is het probleem opgelost tot ik een reboot doe dan is de mount weer verdwenen
Word het mount probleem ook opgelost in openpli 7.2 ?
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 17 September 2019 - 17:34
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 17 September 2019 - 17:36
Welk mount probleem?
Dat waar dit hele topic over gaat.
Ik heb nog nergens gezien dat iemand ook maar enig idee heeft wat bij jou het probleem veroorzaakt (en bij niemand anders), en zonder dat we weten wat het probleem is, komt er ook geen oplossing.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 5 guests, 0 anonymous users
