65 replies to this topic

[lopess]

@WanWizard - all works now on duo4k - great work!

[WanWizard]

Cool, thanks for the feedback.

[lopess]

@WanWizard - mgcamd work well after OPENSSL update on new OPenPLI firmware, but your ipk file doesn't work:

root@vuduo4k:/var/volatile/tmp# opkg install enigma2-plugin-cams-mgcamd.1.35a_1.
0-r4_cortexa15hf-neon-vfpv4.ipk

Collected errors:
 * Solver encountered 1 problem(s):
 * Problem 1/1:
 *   - package enigma2-plugin-cams-mgcamd.1.35a-1.0-r4.cortexa15hf-neon-vfpv4 does not have a compatible architecture
 *
 * Solution 1:
 *   - do not ask to install enigma2-plugin-cams-mgcamd.1.35a-1.0-r4.cortexa15hf-neon-vfpv4

Edited by lopess, 19 November 2019 - 13:46.

[mrvica]

just install it with --nodeps option

[WanWizard]

The VU Duo 4K doesn't have / support the CortexA15 arch, so logical it doesn't install.

[lopess]

yep, it's my fault sorry...

[lopess]

if no problem, please create mgcamd ipk for cortexa Cortexa15 arch too

Edited by lopess, 19 November 2019 - 13:53.

[WanWizard]

Here are all of them, from yesterday's develop build.

 

armv7ahf = all VU+ ARM boxes

cortexa15hf = all other ARM boxes

mips32el-nf = MIPS boxes without floating-point processor (xp1000 etc)

mips32ef = all other MIPS boxes

 

There is no package for aarch64, I doubt it that the current mgcamd binary runs on a 64bit box...

Attached Files

•  enigma2-plugin-softcams-mgcamd_1.35a-r0.0_mips32el-nf.ipk   329.45KB   7 downloads
•  enigma2-plugin-softcams-mgcamd_1.35a-r0.1_mips32el.ipk   329.45KB   10 downloads
•  enigma2-plugin-softcams-mgcamd_1.35a-r0.0_armv7ahf-neon.ipk   350.72KB   15 downloads
•  enigma2-plugin-softcams-mgcamd_1.35a-r0.1_cortexa15hf-neon-vfpv4.ipk   350.72KB   11 downloads

[mrvica]

what is aarch64? is that 64bit amrhf, you my try it with 32bit armhf binary, that is like on PC, 32bit binaries just work fine on 64bit processor, extract it from the .ipk manually and try it on terminal or install it with --nodeps Option and test it

[WanWizard]

Yes, afaik it is currently only used on the Edision OS Mio 4K and OS Mio 4K+, both of which I don't have so I can not test it myself.

[lopess]

@WanWizard - newest mgcamd binary for mips:

Attached Files

•  mgcamd1.45c_mips.zip   312.87KB   10 downloads

[lopess]

enigma2-plugin-softcams-mgcamd_1.35a-r0.0_armv7ahf-neon.ipk - tested on duo4k - all ok
enigma2-plugin-softcams-mgcamd_1.35a-r0.1_cortexa15hf-neon-vfpv4.ipk - tested on zgemma h7 - all ok

GREAT WORK

[WanWizard]

 

Here you go...

 

Attached Files

•  enigma2-plugin-softcams-mgcamd145c_1.45c-r0.0_mips32el.ipk   317.01KB   15 downloads

[WanWizard]

If this one's ok too, I'll merge it into 7.2-rc tomorrow.

[lopess]

enigma2-plugin-softcams-mgcamd145c_1.45c-r0.0_mips32el.ipk - all ok

[WanWizard]

Cool, thanks. I'll merge it into 7.2-rc for tomorrow's build.

[WanWizard]

Yes, afaik it is currently only used on the Edision OS Mio 4K and OS Mio 4K+, both of which I don't have so I can not test it myself.

 

It doesn't build, bitbake complains that the mgcamd binary isn't build for the aarch64 architecture, so I've reverted this again. The rest will be in tomorrows rc build.

[lopess]

@WanWizard - there is problem with install mgcamd from feed. You ipk file doesn't create simlink /lib/ld-2.25.so /lib/ld-linux.so.3
 

root@vuduo4k:~# opkg install enigma2-plugin-softcams-mgcamd135a
Installing enigma2-plugin-softcams-mgcamd135a (1.35a) on root
Downloading http://downloads.openpli.org/feeds/openpli-7.2-rc/armv7ahf-neon/enigma2-plugin-softcams-mgcamd135a_1.35a-r0.0_armv7ahf-neon.ipk.
Existing conffile /usr/keys/mg_cfg is different from the conffile in the new package.
 The new conffile will be placed at /usr/keys/mg_cfg-opkg.
Existing conffile /usr/keys/ignore.list is different from the conffile in the new package.
 The new conffile will be placed at /usr/keys/ignore.list-opkg.
Existing conffile /usr/keys/newcamd.list is different from the conffile in the new package.
 The new conffile will be placed at /usr/keys/newcamd.list-opkg.
Existing conffile /usr/keys/priority.list is different from the conffile in the new package.
 The new conffile will be placed at /usr/keys/priority.list-opkg.
Configuring enigma2-plugin-softcams-mgcamd135a.
ash: /lib/ld-linux.so.3: unknown operand
Collected errors:
 * pkg_run_script: package "enigma2-plugin-softcams-mgcamd135a" postinst script returned status 2.
 * opkg_configure: enigma2-plugin-softcams-mgcamd135a.postinst returned 2.
root@vuduo4k:~# cd /usr/bin
root@vuduo4k:/usr/bin# ./mgcamd
-sh: ./mgcamd: not found

when I create this simlink in terminal, all works ok:

root@vuduo4k:/usr/bin# ln -s /lib/ld-2.25.so /lib/ld-linux.so.3
root@vuduo4k:/usr/bin# ./mgcamd
tuxbox mgcamd v1.35a by mixvt (compiled Jun 19 2013 17:44:40)

[Abu Baniaz]

The post install file I used for ViX/ATV is as below. I am sure there is a better way.

 

 

#!/bin/sh
if [ -f /lib/ld-2.28.so ]; then
ln -s /lib/ld-2.28.so /lib/ld-linux.so.3
echo "ld-2.28.so symlink created"
else
echo "ld-2.28.so link not created"
fi
if [ -f /lib/ld-2.26.so ]; then
ln -s /lib/ld-2.26.so /lib/ld-linux.so.3
echo "ld-2.26.so symlink created"
else
echo "ld-2.26.so link not created"
fi

[WanWizard]

@WanWizard - there is problem with install mgcamd from feed. You ipk file doesn't create simlink /lib/ld-2.25.so /lib/ld-linux.so.3

ash: /lib/ld-linux.so.3: unknown operand

 

Looks like my bashisms in the postinst are not supported by busybox ash. Trying to be too clever. I'll fix it.