Jump to content


Photo

OpenPLi 7.2-release available


  • Please log in to reply
337 replies to this topic

Re: OpenPLi 7.2-release available #61 Taykun345

  • Senior Member
  • 1,297 posts

+41
Good

Posted 15 December 2019 - 17:02

Bad luck with this 7.2 release ...


Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi

Re: OpenPLi 7.2-release available #62 ciciol

  • Senior Member
  • 157 posts

+10
Neutral

Posted 16 December 2019 - 11:15

 

It might be more handy to post a screenshot in English. ;)

The value must be set to "0"

 

 

 

 

 

I will check today when I get back from work. Did you fix the problem with this message and the associated channel switching with this solution? If you found a solution, you have a big Whiskey with me :)


Edited by ciciol, 16 December 2019 - 11:16.


Re: OpenPLi 7.2-release available #63 FRAP

  • Senior Member
  • 333 posts

+23
Neutral

Posted 16 December 2019 - 11:51

 

 

It might be more handy to post a screenshot in English. ;)

The value must be set to "0"

 

 

 

 

 

I will check today when I get back from work. Did you fix the problem with this message and the associated channel switching with this solution? If you found a solution, you have a big Whiskey with me :)

 

On one of the forums, a man wrote that this decision helped him. (I read this and decided to steal (borrow) this idea :)) I myself want it to work !!! I will wait for your tests.


Alcohol for wimps. Strong people enjoy depression.


Re: OpenPLi 7.2-release available #64 ciciol

  • Senior Member
  • 157 posts

+10
Neutral

Posted 16 December 2019 - 16:09

Unfortunately, this method does not work.

Re: OpenPLi 7.2-release available #65 FRAP

  • Senior Member
  • 333 posts

+23
Neutral

Posted 16 December 2019 - 16:59

Unfortunately, this method does not work.

did you restart the box?


Alcohol for wimps. Strong people enjoy depression.


Re: OpenPLi 7.2-release available #66 ciciol

  • Senior Member
  • 157 posts

+10
Neutral

Posted 16 December 2019 - 17:07

Of course

Re: OpenPLi 7.2-release available #67 FRAP

  • Senior Member
  • 333 posts

+23
Neutral

Posted 16 December 2019 - 17:17

Of course

Don’t worry! I'm still looking for a solution (the first pancake came out lumpy)


Alcohol for wimps. Strong people enjoy depression.


Re: OpenPLi 7.2-release available #68 ciciol

  • Senior Member
  • 157 posts

+10
Neutral

Posted 16 December 2019 - 17:19

Good luck and we continue to fight this problem. If you find something, write on priv. :)

Re: OpenPLi 7.2-release available #69 shangi

  • Senior Member
  • 28 posts

+2
Neutral

Posted 18 December 2019 - 13:41

On 7.1 I had the possibility of installing the picons in 400 x 240 which appeared in the list of picons (in Plugins), in 7.2 they no longer appear ...
You too ?



Re: OpenPLi 7.2-release available #70 WanWizard

  • PLi® Core member
  • 70,533 posts

+1,811
Excellent

Posted 18 December 2019 - 15:16

Nothing has changed to our side of the generation of the picons, maybe something has changed upstream, I'll have a look.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.2-release available #71 WanWizard

  • PLi® Core member
  • 70,533 posts

+1,811
Excellent

Posted 18 December 2019 - 15:22

I have updated the configuration, at the next update they will be generated again.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.2-release available #72 shangi

  • Senior Member
  • 28 posts

+2
Neutral

Posted 18 December 2019 - 15:50

I have updated the configuration, at the next update they will be generated again.

great, thank you very much for all this work



Re: OpenPLi 7.2-release available #73 ragunisi

  • Member
  • 4 posts

0
Neutral

Posted 19 December 2019 - 18:36

update 7.2 don't work with vu+ solo4, Green screen 

 

OpenPLi Enigma2 crash log
 
crashdate=mer. déc. 18 12:23:00 2019
compiledate=Dec 12 2019
skin=GlamourAuraFHD/skin.xml
sourcedate=2019-12-12
branch=release-7.2
rev=ca2a1b1
component=Enigma2
 
stbmodel=solo4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p4 rootwait rw rootflags=data=journal debug coherent_pool=2M bmem=633m@387m bmem=499m@2573m
nimsockets=NIM Socket 0:
imageversion=
imageissue=openpli 7.2-release %h
 
 
~   0—{¶   H{%F   __del__     ‡   0—{¶   Ö5©s   __add__     d   0—{¶   cŠå   __radd__    Y   0—{¶   y]à·   __sub__     @   0—{¶   w   __rsub__    x   0—{¶   õ¦Ý   __mul__     f   0—{¶   ük¼   __rmul__    G   0—{¶   ò½n¡   __div__     J   0—{¶   *¼‚   __rdiv__    4   0—{¶   gM͈   __mod__     <   0—{¶   0Œë   __rmod__    =   0—{¶
   ÕÔ‰q   __divmod__  ;   0—{¶   B“oU   __rdivmod__ 6   0—{¶   Uº‹ù   __pow__     <   0—{¶    çâT   __rpow__    9   0—{¶   õÕk†   __neg__     n   0—{¶   ±ùL   __pos__     5   0—{¶   /³Î   __abs__     j   0—{¶   d`^   __nonzero__ /   0—{¶
   Foã   __invert__  C   0—{¶
   VJè   __lshift__  @   0—{¶   Õ£!   __rlshift__ W   0—{¶
    húå   __rshift__  5   0—{¶   “§Ä   __rrshift__ J   0—{¶   g
   __and__     K   0—{¶   ¡x   __rand__    >   0—{¶   ðpž&   __xor__     '   0—{¶   ]z;5   __rxor__    >   0—{¶   Õ•]N   __or__      5   0—{¶   &?V   __ror__     4   0—{¶
   IQæ   __coerce__  P   0—{¶    ®pâ   __int__     K   0—{¶   z&Ì   __long__    K   0—{¶    3àÈ   __float__   *   0—{¶   YàÀÚ   __oct__     $   0—{¶   ØèNf   __hex__     (   0—{¶   nÝÝ   __iadd__    @   0—{¶   AÇKé   __isub__    (   0—{¶   åõá   __imul__       0—{¶   ÊÅçB   __idiv__    4   0—{¶   ›´ë¸   __imod__    '   0—{¶   ñgÿÕ   __ipow__    *   0—{¶   Þ|b   __ilshift__    0—{¶   ¬Ð   __irshift__ =   0—{¶   ¤F;‰   __iand__       0—{¶   <s¶6   __ixor__    9   0—{¶   ñ|´9   __ior__     D   0—{¶   ’PÉ=   __truediv__ W   0—{¶    ù_ì@   __index__     0—{¶   >%Á•   __len__     >  0—{¶   FÚòÈ   __getitem__ Ù   0—{¶   Ò"¿€   __setitem__ z   0—{¶   a ¿   __delitem__ y   0—{¶
   Œè   __reduce__  *   0—{¶
   «73z   __format__  $   0—{¶
   š)¥à   __sizeof__  {  0—{¶    -†[   __class__       t ¶þÿÿÿ-†[   , {¶   ô¯{¶<  0—{¶   =Íì   __doc__         t ¶þÿÿÿ       , {¶   ô¯{¶   0—{¶    ì­wW   __flags__ _    0—{¶   +äŠ    __base__       0—{¶   ¯…nÝ   __mro__     o  0—{¶   ÙŽú<   __name__      0—{¶    ³<°§   __bases__   c  0—{¶
   ‚L{O   __module__    0—{¶   ÆP£   __dict__ _        ¶þÿÿÿ=Íì   , {¶   ô¯{¶    P ¶þÿÿÿ=Íì   , {¶   ô¯{¶    € ¶þÿÿÿ=Íì   , {¶   ô¯{¶1   0—{¶   Þ¯‰   __unicode__     ° ¶þÿÿÿ=Íì   , {¶   ô¯{¶   0—{¶    —4€   conjugate _ 
   0—{¶
   :[|:   bit_length     0—{¶    çTË    __trunc__      0—{¶   @®   real mat__     0—{¶   JµÍ¸   imag           0—{¶    ì&]W   numerator      0—{¶   ËãqÓ   denominator     à ¶þÿÿÿ=Íì   , {¶   43{¶    ‘ ¶þÿÿÿ=Íì   , {¶   ô¯{¶    @‘ ¶þÿÿÿ=Íì   , {¶   ô—{¶p  0—{¶   dáº0   join __  __ 7  0—{¶   µ·   split          0—{¶   \2²õ   rsplit      ë   0—{¶   âõ¤   lower       \   0—{¶   ¨«/   upper          0—{¶   øêmß   islower        0—{¶   ûª|â   isupper        0—{¶   =h#D   isspace        0—{¶   ˜WöB   isdigit        0—{¶   ½è:•   istitle        0—{¶   3#ŸR   isalpha        0—{¶   &ƒ¨   isalnum        0—{¶
   Üñ$ƒ   capitalize  Ÿ   0—{¶   `Ÿ¾~   count lize  ’   0—{¶   ’Mù   endswith       0—{¶    ëã™å   partition   È   0—{¶   Ô…
   find tion   š  0—{¶   ¡˜à}   index       &   0—{¶   ˆ`n   lstrip      B  0—{¶   kÊ   replace     1   0—{¶   îäü¬   rfind e        0—{¶   (iZY   rindex             Ta{¶Ta{¶       à  p  Øq ¶È—|¶ýÿÿÿ        V{¶          , ø}k¶xõõ Q ¶èq ¶ñ<Ø(àP ¶ˆr
I¾`P ¶r ¶            Œ«ŠJ p ¶8r ¶õHIò€P ¶Àq ¶            ¢Ç]ÀP ¶`r ¶            þÿÿÿ        V{¶ù¹  ê·  ÿÿ /³ø}k¶            ñ<Ø(àP ¶àP
I¾`P ¶`P ¶            Œ«ŠJ p ¶ p ¶õHIò€P ¶€P ¶®ž{m P ¶ P ¶¢Ç]ÀP ¶ÀP ¶    øt ¶t ¶ýÿÿÿ        V{¶   øŽ ðÏ÷¶ˆÐö¶0Ñq¶àÀf¶àÀf¶<ª%¶àÀf¶àÀf¶àÀf¶ˆg¶À©g¶(És¶b'¶àÀf¶üÜj¶@ g¶àÀf¶Üjp¶˜Æl¶$Ès¶àÀf¶p—j¶X¹o¶àÀf¶àÀf¶hùk¶p g¶àÀf¶D½l¶ˆ
g¶  g¶LÌk¶àÀf¶ÐÊk¶Üop¶àÀf¶œéi¶¬ßq¶àÀf¶àÀf¶àÀf¶€Ru¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶DÕ4¶¤Ðl¶àÀf¶Øàs¶”‡l¶àÀf¶Bs¶àÀf¶0vp¶àÀf¶üo¶x?j¶àÀf¶ðg¶´<s¶Ìm¶€÷t¶ñH'¶|ßi¶”"j¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶tÙ4¶Èch¶4j¶àÀf¶àÀf¶àÀf¶ˆds¶H°g¶àÀf¶àÀf¶àÀf¶PTi¶àÀf¶àÀf¶Dìr¶è‹g¶àÀf¶Èâq¶´ôj¶›n¶àÀf¶àÀf¶¤“g¶´{p¶`qp¶Hj¶¸Ès¶øÃl¶ Si¶¸Žj¶$”j¶¬µg¶ÜJ4¶„Ùr¶ðä4¶(+o¶\Üq¶Œ8j¶àÀf¶xðh¶àÀf¶àÀf¶àÀf¶àÀf¶4Xg¶àÀf¶Ô¬%¶àÀf¶àÀf¶D\j¶H+l¶àÀf¶àÀf¶àÀf¶àÀf¶ Å)¶èØr¶ lp¶€k'¶@i¶ˆi¶t¶`[j¶Pôr¶ék¶àÀf¶àÀf¶ìep¶àÀf¶dp¶ g¶üñt¶àÀf¶àÀf¶ ˆg¶ô`j¶¼Ãl¶àÀf¶àÀf¶´'¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶LŒg¶|l¶€Ål¶@Jm¶àÀf¶”Ör¶àÀf¶àÀf¶àÀf¶¸ãq¶àÀf¶àÀf¶Ír¶àÀf¶€­g¶¸òt¶(ûj¶lg¶àÀf¶„ùk¶ÄB4¶¼o¶@˜n¶ÈÂk¶„cj¶Ð5&¶Ìƒg¶t‡k¶˜ój¶fs¶àÀf¶ÌF4¶ÄJo¶pl¶ Û'¶ˆ„r¶àÀf¶àÀf¶Ðl¶ žg¶àÀf¶¼tp¶À¼t¶àÀf¶Hjo¶àÀf¶àÀf¶ì‘j¶4p¶Â,¶àÀf¶àÀf¶èTi¶àÀf¶àÀf¶Ümp¶ðl¶àÀf¶àÀf¶4¾t¶àÀf¶Ti¶Ä"l¶dír¶àÀf¶ˆæs¶l‰i¶XTu¶Tîr¶(µg¶¸o¶àÀf¶¬Äg¶àÀf¶<Jk¶Çs¶àÀf¶àÀf¶’g¶hm¶ìl¶àÀf¶€Ãt¶l•g¶àÀf¶àÀf¶ 6=¶àÀf¶¨<&¶$¼%¶¤“l¶|g'¶Èót¶`ûk¶àÀf¶àÀf¶Ðük¶àÀf¶ðK'¶D¢j¶ð³)¶àÀf¶àÀf¶ôl¶àÀf¶¬ i¶ÐSg¶Œ(o¶üÜr¶àÀf¶œÂg¶àÀf¶°$t¶zp¶l¶ø t¶Qo¶ì g¶Ys¶àÀf¶¤]s¶|Žg¶ÔQu¶àÀf¶\fp¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶´Ûn¶àÀf¶ t¶°<t¶P\s¶àÀf¶`
g¶Ü›g¶àÀf¶«g¶l”s¶¼Ò)¶pûr¶”ír¶àÀf¶À,¶¾g¶àÀf¶àÀf¶àÀf¶ÄÅk¶À'¶àÀf¶¼«g¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶ÜKt¶àÀf¶Lñh¶¬Su¶”¦g¶àÀf¶Dj¶@g¶àÀf¶àÀf¶ vp¶àÀf¶Zr¶ð`o¶àÀf¶àÀf¶àÀf¶00l¶àÀf¶àÀf¶àÀf¶¤km¶Dtk¶d>m¶àÀf¶àÀf¶àÀf¶\j¶lím¶@'¶àÀf¶àÀf¶Œêq¶àÀf¶àÀf¶äîk¶ôü4¶àÀf¶@Å)¶àÀf¶Lk¶|wp¶àÀf¶ `j¶8Ég¶øzj¶àÀf¶em¶tOt¶Ûs¶àÀf¶àÀf¶àÀf¶ük¶àÀf¶ìl¶0+l¶Œír¶àÀf¶àÀf¶àÀf¶°¾k¶ýr¶ìõ+¶4op¶`ep¶€,¶€Å)¶Ìg¶Dt¶„þ4¶àÀf¶àÀf¶ôìo¶<A&¶àÀf¶@¿%¶h—t¶àÀf¶¬œt¶ôo¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶$Œg¶\í4¶tbj¶ès¶ð¥g¶”p¶<ès¶ôõ4¶àÀf¶4²t¶t"t¶Ì§g¶àÀf¶àÀf¶ìÙi¶ L'¶Üˆt¶àÀf¶˜ßq¶ü\¶<t¶¸¸%¶l<t¶0•n¶p6l¶¢o¶œ34¶øh¶àÀf¶àÀf¶Ì™j¶àÀf¶àÀf¶È!j¶àÀf¶àÀf¶àÀf¶ìÈm¶àÀf¶˜k¶€öt¶àÀf¶Ìój¶àÀf¶Ôkp¶ˆ t¶ ëi¶HBk¶àÀf¶,\g¶8Ât¶ˆáh¶”e)¶Üqp¶\l¶¸«k¶üíi¶¼g¶àÀf¶àÀf¶ kp¶8‡g¶Hãk¶àÀf¶<Rk¶(³i¶xHô¶Ü g¶ :j¶8õr¶ÌÐ"¶ôáq¶`[g¶àÀf¶òr¶ˆâq¶Øfp¶ôŽh¶àÀf¶Ô®g¶pÊg¶pái¶ hp¶àÀf¶àšo¶àÀf¶¬mp¶Àït¶àÀf¶àÀf¶4l¶Lðj¶àÀf¶àÀf¶4
'¶\¸k¶àÀf¶àÀf¶ô…h¶ð„s¶ o¶$"u¶Ék¶XQ'¶Lt#¶4t¶àÀf¶ˆÔu¶¬‹g¶Èxk¶¨Po¶HÞq¶(7m¶Ô‹g¶àÀf¶Ü©k¶•n¶,™j¶àÀf¶àÀf¶ˆE"¶¬û>¶´Ik¶pE"¶àÀf¶4÷t¶ì!u¶àÀf¶àÀf¶Xnp¶¤´g¶HÊt¶pÕ4¶ØSi¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶Zm¶àÀf¶„l¶XE"¶°t¶\,¶àÄ)¶àÀf¶àÀf¶Ð¶k¶àÀf¶à4&¶Ü>k¶8aj¶|Mo¶Xg¶Äq¶ìh¶`”t¶€‘l¶àÀf¶p¶m¶àÀf¶?s¶Lmp¶¸hp¶Çg¶Hxk¶7j¶À
l¶ÌÝs¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶àÀf¶ÁS'¶„‡i¶œ¸>¶àÀf¶àÀf¶äír¶àÀf¶àÀf¶Tu¶èþ4¶œkp¶àÀf¶ H'¶Ak¶˜×l¶àÀf¶0 g¶tÀl¶ ”s¶´Àl¶¨ás¶ô²g¶àÀf¶ïj¶ì{p¶àÀf¶(is¶àÀf¶ì–s¶àÀf¶ìâq¶àÀf¶àÀf¶àÀf¶<ip¶àÀf¶LBs¶àÀf¶tg¶àÀf¶ g¶àÀf¶ j¶Thm¶ …t¶è!t¶ ¸g¶L+l¶ em¶ðËk¶lãq¶àÀf¶ ôh¶àÀf¶°¶g¶¨Û%¶”æ4¶àÀf¶|Or¶àÀf¶dík¶ tp¶Ðój¶|mp¶Ro¶0±g¶¢t¶\"u¶¬J4¶„‰h¶8<s¶t5¶ˆàr¶„ou¶àÀf¶àÀf¶ˆJo¶ðP'¶àÀf¶Àfm¶àÀf¶àÀf¶àÀf¶Ù%¶`Å)¶ór¶àÀf¶àÀf¶àÀf¶dÇ4¶ ñi¶Àn'¶àÀf¶œ-l¶Ì[k¶Ð3j¶ ãq¶jp¶<Þs¶xj¶l¶àÀf¶àÀf¶ðém¶$W'¶<s¶\ói¶àÀf¶¤mm¶DÇs¶àÀf¶àÀf¶|çh¶ót¶Ä!u¶àÀf¶°<l¶\ l¶àÀf¶àÀf¶|yp¶àÀf¶Ìù+¶àÀf¶àÀf¶Hèq¶–n¶#¶ˆTg¶Øzp¶Xxp¶@ä4¶àÀf¶À6&¶Ôãi¶Lãr¶Djp¶àÀf¶„t¶ü‹g¶\=s¶àÀf¶îj¶àÀf¶àÀf¶àÀf¶áf'¶àÀf¶pôt¶àÀf¶àÀf¶p,¶H<t¶àÀf¶4™g¶,[s¶\§%¶0wk¶àÀf¶´t¶àý>¶£j¶àÀf¶,Bs¶ÔŠo¶<Bs¶àÀf¶àÀf¶èOô¶8tp¶Üñt¶àÀf¶àÀf¶pêo¶àÀf¶àÀf¶àÀf¶ ¨k¶ šs¶àÀf¶àÀf¶Pl¶ Ã,¶àÀf¶àÀf¶àÀf¶øÂl¶àÀf¶¬Hk¶´mo¶àÀf¶(
o¶àÀf¶ÀÏl¶àÀf¶$ºk¶àÀf¶Dt¶\q¶œ&¶=k¶D"¶àÀf¶0o¶8¹g¶àÀf¶$º"¶àÀf¶ÜÏ%¶,ao¶Ôêo¶àÀf¶Ø€g¶àÀf¶Œl¶Øã4¶àÑ"¶àÀf¶àÀf¶ÈXg¶´g¶àÀf¶àÀf¶Ëk¶pW'¶àÀf¶P
l¶ÐSu¶È‰t¶àÀf¶àÀf¶îr¶ðg¶È°g¶¤ùk¶àÀf¶àÀf¶0Gt¶„2"¶„¿l¶øo¶àÀf¶Ìyj¶h{p¶àÀf¶\g¶àÀf¶h¶àÀf¶ yp¶lo¶àÀf¶@ás¶àÀf¶àÀf¶ Âg¶È€j¶Üq¶àÀf¶xzp¶œßs¶ˆÞr¶àÀf¶àÀf¶Ôo¶¬µk¶àÀf¶ l¶àÀf¶àÀf¶1"¶à3&¶àÀf¶àÀf¶àÀf¶t
l¶¼It¶ìi$¶ l)¶Åg¶¨‰l¶àÀf¶àÚi¶€ïi¶àÀf¶4Êk¶àÀf¶\Àg¶˜Âg¶¬¯g¶àÀf¶úk¶àÀf¶p‹g¶Äcp¶ü²g¶»l¶œXg¶ ü4¶$ g¶p€u¶øCj¶àÀf¶àÀf¶tG&¶àÀf¶,ãq¶Dçs¶xJô¶°Ð"¶”o¶4Þs¶ìór¶¸~u¶àÀf¶l…h¶àÀf¶X»m¶<X'¶àÀf¶˜þ>¶àÀf¶µk¶#t¶ädm¶àÀf¶àÀf¶àÀf¶DSi¶àÀf¶Oo¶àÀf¶øg¶àÀf¶àÀf¶Xôr¶  t¶l†h¶¨dp¶†t¶àÀf¶àÀf¶àÀf¶¼t¶`Mm¶,Ãl¶8q¶8Œg¶àÀf¶€rj¶<Úq¶¤lp¶ Þs¶Ðl¶,l¶Xòk¶8ðk¶À€j¶àÀf¶àÀf¶àÀf¶8Ùn¶àÀf¶ÈÌk¶àÀf¶Ülp¶àÀf¶hm¶l/l¶àÀf¶¼Rk¶´gp¶€–g¶ˆ’g¶`l¶pSi¶|h¶$fp¶àÀf¶ˆAs¶äþ4¶@
g¶¼ˆi¶àÀf¶luq¶Dt¶àÀf¶üÀl¶àÀf¶àÀf¶ˆ‘g¶s¶pú+¶Žj¶T«k¶àÀf¶Übo¶4;&¶ U'¶´Ç4¶ÜÙq¶àÀf¶¤õ+¶È,¶àÀf¶àÀf¶àÀf¶Tîj¶àÀf¶ ek¶àÀf¶äU'¶àÀf¶d’o¶àÀf¶Àup¶àÀf¶àÀf¶+l¶|¶p¶àÀf¶àÀf¶àÀf¶à;m¶àÀf¶ðt¶ å4¶Œg¶4ö+¶àÀf¶Äàr¶àÀf¶àÀf¶ôü\¶àÀf¶àÀf¶„ót¶ìgm¶
 
dmesg
 
<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 3.14.28-1.8 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Tue Dec 10 04:08:56 CET 2019
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine model: BCM97366SFF_bad_MoCA
<6>[    0.000000] moving dtb from 0x000000000761c000 to 0x00000000008342d0
<6>[    0.000000] bmem: Reserved 633 MiB at 0x0000000018300000
<6>[    0.000000] bmem: Reserved 499 MiB at 0x00000000a0d00000
<6>[    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 524288
<7>[    0.000000] free_area_init_node: node 0, pgdat c07f9740, node_mem_map cd7f2000
<7>[    0.000000]   Normal zone: 512 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
<7>[    0.000000]   HighMem zone: 5632 pages used for memmap
<7>[    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
<6>[    0.000000] MCP: Write pairing already disabled
<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @cd7c2000 s8768 r8192 d15808 u32768
<7>[    0.000000] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootwait rw rootflags=data=journal debug coherent_pool=2M bmem=633m@387m bmem=499m@2573m
<6>[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>[    0.000000] Memory: 892244K/2097152K available (5723K kernel code, 330K rwdata, 1876K rodata, 248K init, 182K bss, 1188524K reserved, 16384K cma-reserved, 671744K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc077405c   (7601 kB)
<5>[    0.000000]       .init : 0xc0775000 - 0xc07b3240   ( 249 kB)
<5>[    0.000000]       .data : 0xc07b4000 - 0xc0806870   ( 331 kB)
<5>[    0.000000]        .bss : 0xc0806878 - 0xc08342d0   ( 183 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 95)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc441000, parent irq: 74)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 97)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 57)
<6>[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
<6>[    0.000010] Switching to timer-based delay loop
<6>[    0.000285] Console: colour dummy device 80x30
<6>[    0.000305] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
<6>[    0.000313] pid_max: default: 32768 minimum: 301
<6>[    0.000416] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000423] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.006092] CPU: Testing write buffer coherency: ok
<6>[    0.006299] CPU0: update cpu_power 1024
<6>[    0.006307] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.006360] Setting up static identity map for 0x576e90 - 0x576ee8
<4>[    0.009300] CPU1: Booted secondary processor
<6>[    0.009325] CPU1: update cpu_power 1024
<6>[    0.009328] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.009434] Brought up 2 CPUs
<6>[    0.009445] SMP: Total of 2 processors activated.
<6>[    0.009449] CPU: All CPU(s) started in SVC mode.
<6>[    0.009816] devtmpfs: initialized
<6>[    0.013553] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.014574] regulator-dummy: no parameters
<6>[    0.014771] NET: Registered protocol family 16
<6>[    0.017246] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[    0.018101] cpuidle: using governor ladder
<6>[    0.018109] cpuidle: using governor menu
<4>[    0.020095] irq: no irq domain found for /rdb/interrupt-controller@f040a580 !
<4>[    0.020254] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
<6>[    0.023650] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040452f] registered
<6>[    0.023830] syscon f0442400.syscon: regmap [mem 0xf0442400-0xf04427ff] registered
<6>[    0.023988] syscon f0462000.syscon: regmap [mem 0xf0462000-0xf04620ff] registered
<6>[    0.024139] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf0404157] registered
<6>[    0.024288] syscon f0404158.syscon: regmap [mem 0xf0404158-0xf040418f] registered
<6>[    0.024453] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070f] registered
<6>[    0.024603] syscon f0410710.syscon: regmap [mem 0xf0410710-0xf0410717] registered
<6>[    0.024754] syscon f0501004.syscon: regmap [mem 0xf0501004-0xf0501403] registered
<6>[    0.024904] syscon f0901004.syscon: regmap [mem 0xf0901004-0xf0901403] registered
<6>[    0.025048] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
<6>[    0.025198] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
<6>[    0.025340] syscon f0440154.syscon: regmap [mem 0xf0440154-0xf0440157] registered
<6>[    0.025479] syscon f0440354.syscon: regmap [mem 0xf0440354-0xf0440357] registered
<6>[    0.025631] syscon f0440400.syscon: regmap [mem 0xf0440400-0xf0440403] registered
<6>[    0.026135] No ATAGs?
<6>[    0.026154] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.026160] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.126679] brcm-pci f0470000.pcie: link down
<6>[    0.143011] bio: create slab <bio-0> at 0
<5>[    0.143799] SCSI subsystem initialized
<7>[    0.144036] libata version 3.00 loaded.
<6>[    0.144471] usbcore: registered new interface driver usbfs
<6>[    0.144558] usbcore: registered new interface driver hub
<6>[    0.144659] usbcore: registered new device driver usb
<6>[    0.144806] Linux video capture interface: v2.00
<6>[    0.145047] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.145052] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.145112] PTP clock support registered
<6>[    0.145734] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.146596] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.147017] Switched to clocksource arch_sys_counter
<5>[    0.147222] FS-Cache: Loaded
<4>[    0.158429] thermal thermal_zone0: failed to read out thermal zone 0
<6>[    0.158528] NET: Registered protocol family 2
<6>[    0.158979] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.158996] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>[    0.159020] TCP: Hash tables configured (established 2048 bind 2048)
<6>[    0.159101] TCP: reno registered
<6>[    0.159109] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.159123] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.159248] NET: Registered protocol family 1
<6>[    0.159467] RPC: Registered named UNIX socket transport module.
<6>[    0.159472] RPC: Registered udp transport module.
<6>[    0.159475] RPC: Registered tcp transport module.
<6>[    0.159479] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.159488] PCI: CLS 0 bytes, default 64
<6>[    0.159779] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
<6>[    0.161045] futex hash table entries: 512 (order: 3, 32768 bytes)
<4>[    0.161836] bounce pool size: 64 pages
<5>[    0.162337] NFS: Registering the id_resolver key type
<5>[    0.162371] Key type id_resolver registered
<5>[    0.162376] Key type id_legacy registered
<6>[    0.162388] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.162393] Installing knfsd (copyright © 1996 okir@monad.swb.de).
<6>[    0.162781] fuse init (API version 7.22)
<6>[    0.162942] msgmni has been set to 462
<6>[    0.163717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    0.163726] io scheduler noop registered
<6>[    0.163731] io scheduler deadline registered
<6>[    0.163749] io scheduler cfq registered (default)
<6>[    0.164000] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 259, 260
<6>[    0.164649] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.166200] f040b000.serial: ttyS0 at MMIO 0xf040b000 (irq = 108, base_baud = 5062500) is a 16550A
<6>[    0.965142] console [ttyS0] enabled
<6>[    0.969113] f040b040.serial: ttyS1 at MMIO 0xf040b040 (irq = 109, base_baud = 5062500) is a 16550A
<6>[    0.978479] f040b080.serial: ttyS2 at MMIO 0xf040b080 (irq = 110, base_baud = 5062500) is a 16550A
<6>[    0.990981] loop: module loaded
<3>[    0.994801] ahci strict-ahci.0: can't get clock
<6>[    0.999501] ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
<6>[    1.017040] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[    1.025577] ahci strict-ahci.0: flags: 64bit ncq sntf stag clo pmp slum part 
<6>[    1.035305] scsi0 : ahci_platform
<6>[    1.039064] scsi1 : ahci_platform
<6>[    1.042629] ata1: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x100 irq 72
<6>[    1.050564] ata2: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x180 irq 72
<6>[    1.060021] spi_brcmstb f0443400.spi: 1-lane output, 3-byte address
<6>[    1.066427] spi_brcmstb f0443400.spi: master is unqueued, this is deprecated
<4>[    1.073755] m25p80 spi32766.0: found mx25l3255e, expected m25p80
<6>[    1.079789] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
<5>[    1.085044] 5 ofpart partitions found on MTD device spi32766.0
<5>[    1.090889] Creating 5 MTD partitions on "spi32766.0":
<5>[    1.096036] 0x000000000000-0x000000200000 : "flash0.bolt"
<5>[    1.102237] 0x000000200000-0x000000210000 : "flash0.macadr"
<5>[    1.108559] 0x000000210000-0x000000220000 : "flash0.nvram"
<5>[    1.114722] 0x000000220000-0x000000230000 : "flash0.devtree"
<5>[    1.121091] 0x000000000000-0x000000400000 : "flash0"
<6>[    1.127944] libphy: Fixed MDIO Bus: probed
<6>[    1.132717] bcmgenet f0b60000.ethernet: GENET 4.3 EPHY: 0x1002
<6>[    1.147023] libphy: bcmgenet MII bus: probed
<6>[    1.169374] bcmgenet f0b60000.ethernet: configuring instance for internal PHY
<6>[    1.177646] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k
<6>[    1.183487] e1000e: Copyright© 1999 - 2013 Intel Corporation.
<6>[    1.307837] xhci-brcm: xHCI BRCM driver
<6>[    1.311810] xhci-brcm f0481000.xhci: xHCI Host Controller
<6>[    1.317407] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus number 1
<6>[    1.325310] xhci-brcm f0481000.xhci: irq 116, io mem 0xf0481000
<6>[    1.331883] hub 1-0:1.0: USB hub found
<3>[    1.335659] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.342937] xhci-brcm f0481000.xhci: xHCI Host Controller
<6>[    1.348513] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus number 2
<6>[    1.356613] hub 2-0:1.0: USB hub found
<6>[    1.360393] hub 2-0:1.0: 2 ports detected
<6>[    1.364718] ehci-brcm: EHCI BRCM driver
<6>[    1.368745] ehci-brcm f0480300.ehci: EHCI Host Controller
<6>[    1.374323] ehci-brcm f0480300.ehci: new USB bus registered, assigned bus number 3
<6>[    1.392065] ehci-brcm f0480300.ehci: irq 112, io mem 0xf0480300
<6>[    1.417027] ehci-brcm f0480300.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.423492] hub 3-0:1.0: USB hub found
<6>[    1.427273] hub 3-0:1.0: 1 port detected
<6>[    1.431427] ehci-brcm f0480500.ehci: EHCI Host Controller
<6>[    1.437004] ehci-brcm f0480500.ehci: new USB bus registered, assigned bus number 4
<6>[    1.454725] ehci-brcm f0480500.ehci: irq 113, io mem 0xf0480500
<6>[    1.477040] ehci-brcm f0480500.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.483509] hub 4-0:1.0: USB hub found
<6>[    1.487289] hub 4-0:1.0: 1 port detected
<6>[    1.491439] ehci-brcm f0490300.ehci: EHCI Host Controller
<6>[    1.497016] ehci-brcm f0490300.ehci: new USB bus registered, assigned bus number 5
<6>[    1.514727] ehci-brcm f0490300.ehci: irq 118, io mem 0xf0490300
<6>[    1.537020] ehci-brcm f0490300.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.543477] hub 5-0:1.0: USB hub found
<6>[    1.547258] hub 5-0:1.0: 1 port detected
<6>[    1.551400] ehci-brcm f0490500.ehci: EHCI Host Controller
<6>[    1.556974] ehci-brcm f0490500.ehci: new USB bus registered, assigned bus number 6
<6>[    1.574686] ehci-brcm f0490500.ehci: irq 119, io mem 0xf0490500
<6>[    1.597019] ehci-brcm f0490500.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.603454] hub 6-0:1.0: USB hub found
<6>[    1.607681] hub 6-0:1.0: 1 port detected
<6>[    1.611860] ohci-brcm: OHCI BRCM driver
<6>[    1.615873] ohci-brcm f0480400.ohci: BRCM OHCI controller
<6>[    1.621472] ohci-brcm f0480400.ohci: new USB bus registered, assigned bus number 7
<6>[    1.627039] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    1.627985] ata1.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133
<6>[    1.627988] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>[    1.629098] ata1.00: configured for UDMA/133
<5>[    1.629369] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
<5>[    1.630015] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
<5>[    1.630158] sd 0:0:0:0: [sda] Write Protect is off
<7>[    1.630163] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    1.630222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    1.687723] ohci-brcm f0480400.ohci: irq 114, io mem 0xf0480400
<5>[    1.694552] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[    1.751587] hub 7-0:1.0: USB hub found
<6>[    1.755363] hub 7-0:1.0: 1 port detected
<6>[    1.759571] ohci-brcm f0480600.ohci: BRCM OHCI controller
<6>[    1.765161] ohci-brcm f0480600.ohci: new USB bus registered, assigned bus number 8
<6>[    1.772795] ohci-brcm f0480600.ohci: irq 115, io mem 0xf0480600
<6>[    1.837059] usb 3-1: new high-speed USB device number 2 using ehci-brcm
<6>[    1.844106] hub 8-0:1.0: USB hub found
<6>[    1.847885] hub 8-0:1.0: 1 port detected
<6>[    1.852041] ohci-brcm f0490400.ohci: BRCM OHCI controller
<6>[    1.857653] ohci-brcm f0490400.ohci: new USB bus registered, assigned bus number 9
<6>[    1.865271] ohci-brcm f0490400.ohci: irq 120, io mem 0xf0490400
<6>[    1.931533] hub 9-0:1.0: USB hub found
<6>[    1.935303] hub 9-0:1.0: 1 port detected
<6>[    1.939453] ohci-brcm f0490600.ohci: BRCM OHCI controller
<6>[    1.945029] ohci-brcm f0490600.ohci: new USB bus registered, assigned bus number 10
<6>[    1.952756] ohci-brcm f0490600.ohci: irq 121, io mem 0xf0490600
<6>[    2.021526] hub 10-0:1.0: USB hub found
<6>[    2.025387] hub 10-0:1.0: 1 port detected
<6>[    2.029650] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    2.036192] ehci-pci: EHCI PCI platform driver
<6>[    2.037057] ata2: SATA link down (SStatus 0 SControl 300)
<6>[    2.046171] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    2.052375] ohci-pci: OHCI PCI platform driver
<6>[    2.057203] usbcore: registered new interface driver usb-storage
<6>[    2.060157] usb-storage 3-1:1.0: USB Mass Storage device detected
<6>[    2.060761]  sda: sda1
<5>[    2.061582] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    2.076453] scsi2 : usb-storage 3-1:1.0
<6>[    2.080446] mousedev: PS/2 mouse device common for all mice
<6>[    2.086996] i2c /dev entries driver
<6>[    2.091024] IR NEC protocol handler initialized
<6>[    2.095561] IR RC5(x) protocol handler initialized
<6>[    2.100371] IR RC6 protocol handler initialized
<6>[    2.104907] IR JVC protocol handler initialized
<6>[    2.109448] IR Sony protocol handler initialized
<6>[    2.114070] IR RC5 (streamzap) protocol handler initialized
<6>[    2.119653] IR SANYO protocol handler initialized
<6>[    2.124361] IR MCE Keyboard/mouse protocol handler initialized
<4>[    2.130275] cpufreq_cpu0: failed to get cpu0 regulator: -19
<6>[    2.136172] sdhci: Secure Digital Host Controller Interface driver
<6>[    2.142378] sdhci: Copyright© Pierre Ossman
<6>[    2.146739] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    2.153540] mmc0: no vqmmc regulator found
<6>[    2.157659] mmc0: no vmmc regulator found
<6>[    2.207027] mmc0: SDHCI controller on f0440000.sdhci [f0440000.sdhci] using ADMA
<6>[    2.218747] mmc1: no vqmmc regulator found
<6>[    2.222862] mmc1: no vmmc regulator found
<6>[    2.225915] usb 5-1: new high-speed USB device number 2 using ehci-brcm
<6>[    2.277028] mmc1: SDHCI controller on f0440200.sdhci [f0440200.sdhci] using ADMA
<6>[    2.284856] usbcore: registered new interface driver usbhid
<6>[    2.290447] usbhid: USB HID core driver
<6>[    2.297054] TCP: cubic registered
<6>[    2.300379] NET: Registered protocol family 17
<5>[    2.305107] Key type dns_resolver registered
<5>[    2.309491] Registering SWP/SWPB emulation handler
<6>[    2.316759] regulator-dummy: disabling
<6>[    2.337592] ALSA device list:
<6>[    2.342593]   No soundcards found.
<6>[    2.348321] Waiting for root device /dev/mmcblk0p4...
<6>[    2.600664] mmc1: BKOPS_EN bit is not set
<6>[    2.610906] mmc1: new high speed MMC card at address 0001
<6>[    2.616645] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB 
<6>[    2.621290] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
<6>[    2.627318] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
<6>[    2.636463]  mmcblk0: p1 p2 p3 p4
<6>[    2.641240]  mmcblk0boot1: unknown partition table
<6>[    2.646801]  mmcblk0boot0: unknown partition table
<4>[    2.677592] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<5>[    3.183988] scsi 2:0:0:0: Direct-Access     hp       v195b            4096 PQ: 0 ANSI: 0 CCS
<5>[    3.194379] sd 2:0:0:0: Attached scsi generic sg1 type 0
<5>[    3.200869] sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
<5>[    3.209627] sd 2:0:0:0: [sdb] Write Protect is off
<7>[    3.214463] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
<3>[    3.221349] sd 2:0:0:0: [sdb] No Caching mode page found
<3>[    3.226698] sd 2:0:0:0: [sdb] Assuming drive cache: write through
<3>[    3.237926] sd 2:0:0:0: [sdb] No Caching mode page found
<3>[    3.243287] sd 2:0:0:0: [sdb] Assuming drive cache: write through
<6>[    3.251257]  sdb: sdb1
<3>[    3.258312] sd 2:0:0:0: [sdb] No Caching mode page found
<3>[    3.263641] sd 2:0:0:0: [sdb] Assuming drive cache: write through
<5>[    3.269815] sd 2:0:0:0: [sdb] Attached SCSI removable disk
<6>[    4.019036] EXT4-fs (mmcblk0p4): 7 orphan inodes deleted
<6>[    4.024360] EXT4-fs (mmcblk0p4): recovery complete
<6>[    4.038374] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
<6>[    4.047309] VFS: Mounted root (ext4 filesystem) on device 179:4.
<6>[    4.053807] devtmpfs: mounted
<6>[    4.057091] Freeing unused kernel memory: 248K (c0775000 - c07b3000)
<5>[    4.344852] random: nonblocking pool is initialized
<6>[    4.717631] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
<4>[    4.765649] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended
<6>[    4.775063] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[    5.454576] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
<6>[    5.767055] usb 5-1: reset high-speed USB device number 2 using ehci-brcm
<6>[    5.926690] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
<6>[    5.962566] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
<7>[    5.970677] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[    6.000834] usbcore: registered new interface driver rt2800usb
<4>[    6.697874] procmk_init
<4>[    6.704449] bcm_event: module license 'Proprietary' taints kernel.
<4>[    6.710691] Disabling lock debugging due to kernel taint
<6>[   10.037700] DVB: registering new adapter (_vuplus_solo4k_)
<4>[   10.527120] bcm7376: hotplug_callback(): 
<4>[   10.527120] Hotplug - status.connected 1:0:1
<4>[   10.534129] bcm7376: hotplug_callback(): 
<4>[   10.534129] Hotplug - connecting HDMI to display 0xe
<6>[   10.827031] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
<4>[   10.997101] [MPVR]: >> misc_pvr_init
<4>[   11.006970] [VID]: 6bcm7335_video_init
<4>[   11.070783] [AUD]: 6bcm7335_audio_init
<4>[   11.075207] [AUD]: >> bcm_audio_capture_init
<4>[   11.097130] qam=0, ofdm=0, satellite=1
<6>[   11.102843] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   11.113301] qam=0, ofdm=0, satellite=1
<6>[   11.118635] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   11.128668] qam=0, ofdm=0, satellite=1
<6>[   11.133513] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   11.145350] qam=0, ofdm=0, satellite=1
<6>[   11.150027] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   11.159489] qam=0, ofdm=0, satellite=1
<6>[   11.163999] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   11.174490] qam=0, ofdm=0, satellite=1
<6>[   11.179063] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   11.188854] qam=0, ofdm=0, satellite=1
<6>[   11.193376] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   11.202186] qam=0, ofdm=0, satellite=1
<6>[   11.207289] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   11.216116] bcm7376: bcm7335_frontend_init(): vtuner1 : 9
<4>[   11.352027] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
<4>[   11.359910] BKNI_Malloc(linuxkernel) top users:
<4>[   11.359910]     blocks,   bytes, filename:line
<4>[   11.369187]       1295,  282496, BSEAV/lib/utils/balloc.c:31
<6>[   11.449959] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>[   11.501371] [LCD]: registered
<6>[   12.047333] [CI]: registered ci0
<6>[   12.087583] [CI]: CI interface initialised
<6>[   12.087583] 
<6>[   12.147428] [DFP]: registered dbox fp
<6>[   12.167852] [SC]: registered sci0
<6>[   12.173052] [SC]: registered sci1
<4>[   13.797045] system_time_set wakeup mode get 
<4>[   13.857033] system_time_set wakeup mode get 0xc1
<6>[   14.607034] f0b60000.etherne:01: Broadcom BCM7366 PHY revision: 0x10, patch: 2
<6>[   16.607110] libphy: f0b60000.etherne:01 - Link is Down
<6>[   17.636655] libphy: f0b60000.etherne:01 - Link is Up - 1000/Full
<6>[   21.184298] NET: Registered protocol family 10
<6>[   21.440196] Bluetooth: Core ver 2.18
<6>[   21.444169] NET: Registered protocol family 31
<6>[   21.448832] Bluetooth: HCI device and connection manager initialized
<6>[   21.455529] Bluetooth: HCI socket layer initialized
<6>[   21.460467] Bluetooth: L2CAP socket layer initialized
<6>[   21.465722] Bluetooth: SCO socket layer initialized
<4>[   25.899826] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[   25.904302] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   25.909095] [VID]: VIDEO_PLAY 1  5 0
<4>[   25.917981] [VID]: VIDEO_CONTINUE 1  1 
<4>[   25.922137] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[   26.084352] [VID]: VIDEO_STOP 0  1
<4>[   26.089142] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[   30.600334] [AUD]: AUDIO_SET_MUTE 0 
<4>[   30.604739] [AUD]: AUDIO_SET_MIXER -897597816 
<4>[   30.609246] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[   30.614305] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
<4>[   30.621191] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70


Re: OpenPLi 7.2-release available #74 WanWizard

  • PLi® Core member
  • 70,533 posts

+1,811
Excellent

Posted 19 December 2019 - 19:23

Known problem, early image, it's best to flash 7.2 again.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.2-release available #75 nor50

  • Senior Member
  • 423 posts

+1
Neutral

Posted 20 December 2019 - 14:58

OpenPLi Enigma2 crash log

crashdate=fr. des. 20 14:54:13 2019
compiledate=Dec 12 2019
skin=PLi-FullNightHD/skin.xml
sourcedate=2019-12-12
branch=release-7.2
rev=ca2a1b1
component=Enigma2

stbmodel=ultimo4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=622m bmem=630m@394m bmem=383m@1665m bmem=443m@2625m
nimsockets=NIM Socket 0:
imageissue=openpli 7.2-release %h


Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
  File "/usr/lib/enigma2/python/Screens/MovieSelection.py", line 795, in btn_blue
  File "/usr/lib/enigma2/python/Components/config.py", line 1682, in __getattr__
AttributeError: btn_blue


Is this enough to tell the reason to crash?


VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3


Re: OpenPLi 7.2-release available #76 WanWizard

  • PLi® Core member
  • 70,533 posts

+1,811
Excellent

Posted 20 December 2019 - 15:19

Did you press the blue button without a function being assigned to it?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.2-release available #77 nor50

  • Senior Member
  • 423 posts

+1
Neutral

Posted 20 December 2019 - 15:28

I "MIGHT" have pressed it without meaning to do it.


VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3


Re: OpenPLi 7.2-release available #78 WanWizard

  • PLi® Core member
  • 70,533 posts

+1,811
Excellent

Posted 20 December 2019 - 15:42

Whether or not you meant it, it shouldn't crash. ;)

 

Just trying to understand what happened / what you did to make it crash, don't see anything special in the code, at first glance.

 

Just checking, you don't use an upgraded 7.1 image, or a 7.2 from the first release?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.2-release available #79 nor50

  • Senior Member
  • 423 posts

+1
Neutral

Posted 20 December 2019 - 15:53

First 7.2


VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3


Re: OpenPLi 7.2-release available #80 WanWizard

  • PLi® Core member
  • 70,533 posts

+1,811
Excellent

Posted 20 December 2019 - 15:54

In that case it might be you have some leftovers of the initial problems in your installation.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.



7 user(s) are reading this topic

0 members, 7 guests, 0 anonymous users