Er zijn 337 reacties in dit onderwerp

[WanWizard]

Maybe the download servers are busy and you've hit the rate limiter?

[Robinson]

Should I turn the box off and on now? And try something again?

What will happen? Will I be able to boot normally if I switch the box off?

[WanWizard]

You can just restart the box.

 

If it doesn't restart with the autoinstall, you can do that manually from the autobackup screen (menu, run autoinstall).

[yozeno]

Vu+ solo2 with this image 7.2  image has black screen when I try to play any non recorded movie.

.......... with 7.1 I had no problems !!!!!!!!

Same here. Formuler F1. some recordings does not work. Now i cant put another image on it. On every image it says "flashing" and doesnt go further.

Only images that work is OpenPli 7.2 and 6.2. Factory Image is only image that boots. but it says "this image is based on Openpli and so, not genuine?" So OpenPli did something that my Formuler doesnt work anymore.

[WanWizard]

Quite unlikely, except bugfixes there is really nothing new in 7.2.

 

Flashing is done by the bootloader which isn't from us, and both the bootloader and the drivers for the Formuler 1 haven't changed in dogs years...

 

The problem with the VU+ is most likely downloaded movie files encoded in a non-standard format. VU+ has recently dropped support for some older formats (probably for license costs reasons), such as VP-9 and VC-1.

[dudule22]

Thanks for this new release.

 

Disecq ABCD works fine now, i can use a specific switch.

 

You can see the last post : https://forums.openp...-release/page-5

 

It isn't solved. It doesn't work now, no signal on dish C. A and B are Ok.

Sometime, it works and after a reboot, it doesn't work.

I don't know why.

[serdeliuk]

I have upgraded my VUSolo4K to OpenPli 7.2 but it is very slow over ssh, it takes ages to take commands, I downgraded back to 7.1 and all went back to normal, is there anything i can do with 7.2?

Most of the time i use my VU headless over ssh with development tools installed on it building/testing apps....

Veranderd door serdeliuk, 7 januari 2020 - 19:55

[serdeliuk]

Sorry, false alarm, i do not know what pli7.2 version i had, but i downloaded the latest one and installed and all works well, thanks

[dudule22]

Today, after a switch off on,the tuner FBC DVB-S2X with disecq ABCD is ok on dish c (AB3 5 W). Sometime it works and sometine no.

It used on DUO 4 K with a FBC DVB-S2X and Dual T2(MTISF)Tuners.

 

You can see the last post : https://forums.openp...-release/page-5

 

I see another little bug : AVB settings are lost in 2160 30 Hz. I need to select 2160 and select no and select again 2160 30 Hz.

Veranderd door dudule22, 9 januari 2020 - 20:15

[Pr2]

I have the same DiseqC setup:
 
A: Hotbird 13.0E
B: Astra 19.2E
C: Atlantic Bird 3 5.0W
D: nothing connected
 
My second tuner is: Vuplus DVB-C NIM(TT3L10) (TypeMultiple DVB-C/T2)
 
And I have no problem on my Duo4K.
 
So I suspect that your DiseqC device is probably in default.
 
Pr2

Veranderd door Pr2, 9 januari 2020 - 20:58

[dudule22]

I use a divider by 2 to divide the cable on 2 boxes. The first one is the DUO4k and the second is an Atlas 200.

On the atlas 200 all work fine, no problem.

I have the same config than you.

A: Hotbird 13.0E
B: Astra 19.2E
C: Atlantic Bird 3 5.0W
D: nothing connected

 

Have you got this switch https://www.2galli.f...62IW_OPTION.cfm , after an monobloc dish ?

[Pr2]

Connect only one box (so totally power off the Atlas). But your setup is clearly quite complicated for so a simple setup.

[Babadem]

Is there a plan to incorporate newer kernels in the next release?

[WanWizard]

I think the current develop runs on 5.4.1.

[Babadem]

I think the current develop runs on 5.4.1.

No. It's running on Kernel Version 5.3.0.

[betacentauri]

If you are speaking about edision mio4k, mio4kplus, mini4k then wanwizard is right.
https://github.com/e...c066e8661478cc7

[WanWizard]

Yes, 7.2-release runs on 5.3.0.

[dudule22]

Disecq ABCD seems to be ok now. It was probably a litle bad ground problem on F connectors. VU+ DUO 4k seems to be more sensitive than other boxes.

 

@PR2 Thanks

[daif01]

I got my vu+ultimo 4k yesterday. flashed openpli 7.2 but the image crashed several times specially when i try to zap/ change channels.

Bijgevoegde Bestanden

•  enigma2_crash_1579399659.log   64,45K   6 Aantal bijlagen

[littlesat]

[eTextPara] renderString: no current_face->size
Is all I see in the crashlog....