486 replies to this topic

[Gold_66]

Ok, here's the situation:

I had OpenVix in flash and OpenATV in startup_2, I could switch between them but now I installed OpenPLi in startup_3 and I'm stuck - can't go back to any of them.
Restart doesn't help, it starts with OpenPli again, does this mean I have now OpenPli in flash and the other two are deleted, or is there a way to switch to OpenVix?
I knew multiboot wasn't yet supported but I thought if I install OpenPli in flash can't install other images in sd card, didn't think that it wouldn't even work as second or third image.

Another question: How do I activate HBBTv? Red button doesn't do anything even though I assigned this action to it via Hotkey, and there's no HBBTv kit to download in plugins.

Thanks for making OpenPLi available for SF8008.

[betacentauri]

Start the box from deep standby and immediately press and hold the power button on the box. UPDTE should appear on the display. After some seconds a boot menu should appear on the TV screen where you can choose which image should be started.

[Gold_66]

Thanks for prompt reply, it worked and this has been a great info.

[stro11]

Here is an overview of the Led and Display control commands.

 

##### Telnet commands to control your Led and display #####

 

Led during Power on:

 

Led off:
echo 0 > /proc/stb/fp/ledpowercolor

Led Blue:
echo 1 > /proc/stb/fp/ledpowercolor

Led Red:
echo 2 > /proc/stb/fp/ledpowercolor

Led Violet:
echo 3 > /proc/stb/fp/ledpowercolor

 

 

Led during Standby:

 

Led off:
echo 0 > /proc/stb/fp/ledstandbycolor

Led Blue:
echo 1 > /proc/stb/fp/ledstandbycolor

Led Red:
echo 2 > /proc/stb/fp/ledstandbycolor

Led Violet:
echo 3 > /proc/stb/fp/ledstandbycolor

 

 

Led during Power off:

 

Led off:
echo 0 > /proc/stb/fp/ledsuspendledcolor

Led Blue:
echo 1 > /proc/stb/fp/ledsuspendledcolor

Led Red:
echo 2 > /proc/stb/fp/ledsuspendledcolor

Led Violet:
echo 3 > /proc/stb/fp/ledsuspendledcolor

 

 

Display during Power on:

 

Display off:
echo 0 > /proc/stb/fp/power4x7on

Display on:
echo 1 > /proc/stb/fp/power4x7on

 

 

Display during Standby:

 

Display off:
echo 0 > /proc/stb/fp/power4x7standby

Display on:
echo 1 > /proc/stb/fp/power4x7standby

 

 

Display during Power off:

 

Display off:
echo 0 > /proc/stb/fp/power4x7suspend

Display on:
echo 1 > /proc/stb/fp/power4x7suspend

 

regards

stro11

Attached Files

•  Led_and_Display_control_sf8008.txt   1.16KB   13 downloads

[littlesat]

Don’t we have this procs checked in SystemInfo.py?for other boxes we have.... hopefully this box does not invent their own system...

Edited by littlesat, 21 March 2020 - 13:17.

[betacentauri]

No, not afaik.

[littlesat]

The it should be added or we have to ask the manufacturer to go for something standard that is already in e2....
I start hating openatv + Oe-a excepting everything and adapting to everything....
Hopefully this can be fixed via SystemInfo.py...

[twol]

The it should be added or we have to ask the manufacturer to go for something standard that is already in e2....
I start hating openatv + Oe-a excepting everything and adapting to everything....
Hopefully this can be fixed via SystemInfo.py...

@Littlesat - SystemInfo ? - nothing so simple. Unlike the Gigablue LED implementation which is fairly transparent, the SF8008 receiver(s) in the OE-A typically  use a combination of changes in SystemInfo, LCD.py and data/setup.xml - nothing on this box is straight forward.

[littlesat]

Yes openatv make a mess of it they have if box x then do y hacks anywhere... here the only box depended file is SystemInfo.py... here features are defined and the feature key is pointing to the proc.
When it is approx the same as Gb then we only need some adaptions to SystemInfo.py to get this job done.
And when it is totally different we better can contact the manufacturer. But as openatv already accepted some crap this is not easy.

Edited by littlesat, 21 March 2020 - 13:39.

[athoik]

Have you checked that patch ?

 

https://github.com/s...f8008_led.patch

[littlesat]

That should work for this box... now we should wait for the merge request....

[littlesat]

I cannot check right now...

[athoik]

Pushed: https://github.com/O...8584de3697dcc7c

[littlesat]

Maybe trigger wanwizard so he could push it to 7.2rc

[athoik]

Cherry-picked in 7.2 as well.

[WanWizard]

7.2-rc is no longer. The sf8008 is now available in 7.2-release.

 

I'm waiting for the multiboot stuff to do done and finished, so I can start on 7.3-release, which whill then also include this fix.

 

After that is done, we can advance develop to a new OE.

[leien]

I have a problem, kodi plugin cannot play video

[abumarya]

regarding to kodi i try to install but it is 17.6 how to upgrade to 18.6

2nd i try to upgrade the receiver t0 (23 -3 )the server is nut working

 

thanks

[littlesat]

We do not offer kodi... Kodi is offered via the manufacturer via the bsp.

[abumarya]

i think the 2 things still missing in the image

 

- show clock in stand by

- multi boot change

 

i hope they can solve it soon

 

thanks for support sf8008