66 replies to this topic

[WanWizard]

Possible, is needs to be enabled in the kernel config.

 

From what I can see, that is only the case for the VU+ 4K boxes, Zgemma, Edision OSMio, and the Gigablue boxes. None of the others have this driver available.

[Abu Baniaz]

The commits on 10 April 2017 allow for signal values to be read.

https://github.com/t...3a242f5de296b9a

 

Can we add something to E2 to read these values?

[pybear38]

Hello,

 

I install this XBox Tuner on my VuPlus Duo 4K SE with Openpli 9.0 and it works very well.
I add the 6 commands with telnet:

 

opkg install firmware-mn8847x
opkg install kernel-module-mn88472
opkg install firmware-dvb-demod-mn88472-02
opkg install kernel-module-tda18250
opkg install firmware-dvb-usb-dib0700-1.20
opkg install kernel-module-dvb-usb-dib0700

 

All are ok and after a reboot, the tuner is OK.

 

Only thing signal values don't work on infobar.
(If somebody knows how to do for having signal values, it would be so great)

 

So for now a good tuner.

[WanWizard]

You might have a look if changing the tuner setting to legacy has any effect.

 

There are a few scenario's possible: the drivers doesn't support DVB API v5 (hence the legacy option), or the API doesn't provide statistics (and then you're out of luck).

[pybear38]

You might have a look if changing the tuner setting to legacy has any effect.

 

There are a few scenario's possible: the drivers doesn't support DVB API v5 (hence the legacy option), or the API doesn't provide statistics (and then you're out of luck).

How can I change the tuner setting to legacy ? I don't know how to do.

thank to help.

 

update. I find the setting... but no effects. 0% SNR and AGC

 

so the tuner work very well. It's cool to have a good DVB-T2 tuner for Openpli 9.0.

 

Pat

Edited by pybear38, 29 July 2024 - 14:43.

[WanWizard]

Menu - Setup - Tuners & Scanning - Tuner configuration.

 

Then select your tuner en press Ok. One of the options near the bottom (if supported) should be "Force legacy signal stats", set this to Yes / green and see if that makes a difference.

 

If not, the driver doesn't support any statistics.

 

edit: ok, I see it's not supported.

 

I've added making a meta-driver package to my todo list, so it can be installed from the plugin / drivers screen next time.

[pybear38]

hello,

 

Great. A future meta-driver will be a very good thing to have. Thank in advance.

 

Have a great week.

Pat