Posted 4 June 2020 - 11:10
The easiest way:
Menu - Parameter - System - Expert Parameters - Network
Choose you connection I guess it is LAN Connection
There you will find Network Browser
It will search and discover all your equipment which are sharing disk.
Select it and add it from there.
Pr2
yes, but first you must setup Synology 
Posted 4 June 2020 - 11:35
Then you only ever used the network browser after you imported the backup.
The thing only shows the desired subdirectories if they have already been added. At least with cifs and for example the FritzNas.
It is much easier to add the desired mount manually beforehand via the network mount.
I would also recommend this to everyone who knows a little.
It also makes a lot more sense than manually editing the files.
Posted 4 June 2020 - 11:51
Great thanks to WANWIZARD.
All my settings were correct except the Shared Folder.
I corrected and I have access to my NAS.
Once again, thank you
Posted 12 August 2020 - 20:23
Hello,
I update OpenPLI to latest version to my boxes.
And I can report, that on VU+ Uno4K automaunt is not working.
the config file automount.xml is copyed. it's wotrks on Vu+ Zero (I have several), but the same config (i just copy /etc/enigma2 folder from Zero to Uno4K does not mount me my CIFS.
P.S. no problem with server, user/password. as it's a copy
Ed
Posted 12 August 2020 - 21:21
How did you copy? With Enigma stopped? You can't replace configuration files while it is running.
Also, for CIFS connection parameters are autodetected when you create the mount. The correct parameters depend very much on the linux kernel and drivers available for the box, so chances are they are different for the Zero and the Uno 4K.
And finally, be careful if you copy using Windows, as the files are in UTF-8, if the copy doesn't happen in binary format, encoding issues may play a part too.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 August 2020 - 22:40
Hello,
I found an issue, and don't know why. but it's working now.
so, on VU+ Zero SMB by default set options: vers=3,sec=ntlmssp,ro
but on VU+ Uno4K & Ultimo4K it's works with options: vers=2.1,sec=ntlmssp,ro
any comments on this?
Ed
Posted 12 August 2020 - 23:45
Yes. What part of my previous post didn't you get? I wrote exactly that.
So the CIFS kernel driver of the Zero supports SMBv3, and the driver of the 4K boxes doesn't.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 1 guests, 0 anonymous users
