355 replies to this topic

[sportfootbol]

Is there a solution for multiboot ... Which image in flash..Thankis,,Zgemma H7S

[WanWizard]

Not the two arrows under 7 and 9. The recall button is a circular arrow under right key button [sf8008].
On openpli this button is not working at all unless you set it in hotkey

 

I've never seen a remote with such a key. OpenPLi doesn't have any specific support for it, you can zap through zap history via the < and > keys.

[catastrofus]

Nice.

 

Can openPli have it a decent history zap ready to be used without installing and configuring aditional plugin ?
My recall button is useless in pli while in all images it opens a skinned history zap that suite the default skin.
Example of simple yet beautiful history zap in atv default skin
historyzap.jpg
 

 

[cmmc45]

O Open Pli 7.3 não está funcionando no ZgemmaH9S. Consigo meter o firmware, ele aceita o mesmo e após configurara o recepyor ytrabalha. Acontece porém que, sempre que desligo o mesmo e tento novamente ligar o mesmo,o receptor fica bloqueado, sem acesso a quaisquer funções. Fui obrigado assim a voltar para o OpenPLI 7.2. Existe alguma problema com este soft relacionado com este receptor

 

Google translation.

Open Pli 7.3 is not working on the ZgemmaH9S. I can insert the firmware, it accepts the same and after configuring the receiver ytrabalha. It happens, however, that whenever I turn it off and try to turn it on again, the receiver is blocked, without access to any functions. So I was forced to go back to OpenPLI 7.2. There is a problem with this soft related to this receiver

Edited by Frenske, 20 July 2020 - 21:58.
Only English please. I added the Google translation. We have no Spanish section.

[cmmc45]

Obrigado pela informação. Foi exactamente isso que fiz, voltei para o O Open Pli 7.2.

Cumprimentos.

 

Thanks for the info. That's exactly what I did, I went back to O Open Pli 7.2.

Best regards.

Edited by Frenske, 20 July 2020 - 21:58.

[balkanac]

I have Zgemma H7s

With OpenVix 5.3 in the flesh, OpenPLi 7.2 working on multiboot. I  install OpenPLi 7.3, but that kill my multiboot ?!?!?

The other three images are missing.

Please development OpenPLi team to solve this problem.
Thank you!

 

P.S.

Please recommendation, which image put in a flash to make everything work perfectly.

Edited by balkanac, 21 July 2020 - 19:18.

[WanWizard]

Not possible.

 

There are two multiboot methods in use, and all images flashed must just the same method, you can't mix old and new. This is not specific for OpenPLi, this is true for all images.

[sportfootbol]

OpenPLi 7.2 worked perfectly with OpenVix 5.3 in flash...If you do the same with OpenPLi 7.3...from OpenPli 7.3 you can't go any further because the other image is not visible...

 

 

[isteric2005]

 

I can't understand where I have to intervene and how.

I hope someone gives me information

 

If Oscam Status can't connect, either Oscam isn't running at all, or it is running on a non-standard port, in which case you need to update the configuration.

 

what are the files where to intervene

[Kaizoku]

I just installed latest vix recovery image then atv 6.4 in slot 2.
When installing latest pli multiboot image it stuck on splash screen.
All these images use new multiboot system so there is no mixing of old and new multiboot here.

-sf8008-

Edited by Kaizoku, 21 July 2020 - 20:09.

[balkanac]

Not possible.

 

There are two multiboot methods in use, and all images flashed must just the same method, you can't mix old and new. This is not specific for OpenPLi, this is true for all images.

If possible with OpenPLi 7.2, why is not possible with OpenPLi 7.3?

Are my expectations that customers get better, not worse, was wrong?

Practically, for me as a user, OpenPLi 7.3 is worse than OpenPLi 7.2.
I would prefer to use only two images in multiboot: PurE2 and OpenPLi.

However, my impression is that OpenPLi team does not want competition and practically puts me in a position of take it or leave it. If you so wish, OK, I will in the future in multiboot use PurE2 and OpenATV. It is not my decision, it's your decision ...

Edited by balkanac, 21 July 2020 - 21:01.

[WanWizard]

I just installed latest vix recovery image then atv 6.4 in slot 2.
When installing latest pli multiboot image it stuck on splash screen.
All these images use new multiboot system so there is no mixing of old and new multiboot here

 

It is not about the recovery image. It is about the image you flash using the USB method. That image will prepare the partitions used for multiboot flashing (those images are different).

 

If you flash the box with OpenPLi 7.2, older images in multiboot will boot, 7.3 will not. If you flash the box with OpenPLi 7.3, no older OpenPLi image will boot in multiboot. And the same is true for all other images out there.

[WanWizard]

However, my impression is that OpenPLi team does not want competition and practically puts me in a position of take it or leave it. If you so wish, OK, I will in the future in multiboot use PurE2 and OpenATV. It is not my decision, it's your decision ...

 

By all means, do. You will notice exactly the same thing. Old ATV images won't boot in mutliboot if the box was flashed with a new ATV image, and the other way around.

 

Reason is that until about 6 months ago, every manufacturer sort of implemented their own multiboot system, which was a nightmare to implement properly in Enigma. We've worked hard with ATV and the manufacturers to get the multiboot mechanism standardized, which has now happened, so all image makers now make images using the standardized format.
 

[sportfootbol]

Explain why  OpenPli 7.3 does not work with multiboot  if in flash Purte 6.5 OpenAtv 6.4 or OpenVix 5.3..If they can work with each other, and only your image don't work, where is the problem...

There has been disagreement with Pure fimage or a long time...In the end, I will focus on OpenATV and Pure...

[WanWizard]

I've already explained it. If you choose not to believe what I write, that is entirely up to you.

[Kaizoku]

I just installed latest vix recovery image then atv 6.4 in slot 2.
When installing latest pli multiboot image it stuck on splash screen.
All these images use new multiboot system so there is no mixing of old and new multiboot here

It is not about the recovery image. It is about the image you flash using the USB method. That image will prepare the partitions used for multiboot flashing (those images are different).

If you flash the box with OpenPLi 7.2, older images in multiboot will boot, 7.3 will not. If you flash the box with OpenPLi 7.3, no older OpenPLi image will boot in multiboot. And the same is true for all other images out there.

The image i flash with usb is Openvix.5.3.039.Release.Sf8008.Recovery.Emmc.zip
(I always start with vix to have original hisilicon splash screen)
openatv-6.4-sf8008-20200721_mmc.zip in slot 2 andopenpli-7.3-release-sf8008-20200720_multiboot.zip in slot 3.
Vix and atv slots are working and booting, slot 3 stuck at boot..

Are you suggesting installing openpli-7.3-release-sf8008-20200720_usb.zip to be able to boot ?

Edited by Kaizoku, 21 July 2020 - 22:01.

[WanWizard]

I'm not suggesting anything,

 

I am just saying that there is a long list of multiboot capable boxes that received a backwards incompatible change to their multiboot mechanism. The SF8008 is just one of those boxes in the list.

 

The difference for the SF8008 box is very clear: the old system required an SD card in the SD slot to store the multiboot partitions, the new system doesn't, it uses the internal 8GB eMMC.

 

I don't know what those images are using as their OE. OE-A has changed the partitioning system in 4.4, on April 17th: https://github.com/o...eabd2c74baf0330

 

If you look at the list of images shown in the boot menu, you'll see some will mention the "old" or "new" boot format: https://github.com/o...r/sf8008/images

 

So pure2 6.5 uses the new format, so with that flashed you would be able to boot OpenPLi 7.3. But you won't be able to boot ATV anymore (until they update to the new format)

[Kaizoku]

Vix and atv both teams use new multiboot format, im sure of that because i always flash with vix first as recovery emmc then atv mmc and pli multiboot and i can boot my 3 favorite images without problems.
The first 7.3 release had this problem that was fixed in the same day.. with monday release the issue happens again.

By the way, thanks pli team because of your suggestion and insisting in changing the multiboot foemay we sf8008 owners can enjoy multiboot without needing sd card.

[WanWizard]

I have an SF8008 here with OpenPLi develop (homebuild) flashed (and in slot1). and OpenPLi 7.3-release in slot2. Both use the new multiboot system, and both boot fine.

 

I have just flashed OpenVIX 5.x in slot3 and OpenATV 6.4 in slot4, both using network multiboot upgrade in the boot menu. Both boot fine too.

[Kaizoku]

Thanks for testing and for your time.
I did install openpli-7.3-release-sf8008-20200720_usb.zip and the receiver stuck at boot.
So i entered recovery menu and used usb multiboot upgrade and install atv mmc in slot 1 containing pli.. after reboot slot 1 that now have atv is booting fine.
I will wait for upcoming pli releases since develop branch you tested has this fixed.