2 replies to this topic

[IanJ]

Hi All,
I am a newb to this game and have been searching for a couple of days now but can't seem to get to the bottom of this.

I just got my DM600S (have been using retail style boxes and borrowed a friends DM5600S which is only setup for Optus C1).

When using the standard Dreambox image on my box it blindscans justfine and picks up all the channels. When I use the Jade image (latestversion) it will only blindscan on Intelsat8 and when it does I don'tmanage to get all the foxtel channels.

If I try to blindscan any of the Optus transponders it gives me "noTransponder for (LOF/L vertical)". I have tried changing the LNBsettings as per another thread in here but that makes no difference.

Satfind seems to see C1 just find but the transponder searchingdoesn't. I know my signals aren't 100% (got someone coming to tweak thedish) but given that it works with retail boxes, the DM5600s and thestandard image I don't think this is my problem.

Thanks in advance,
Ian

[jonc]

In another thread on another forum [ http://www.austech.i...can-issues.html ] you also said

"Ok...fixed it, but not sure how! Copied config file from etc/tuxbox/enigma on friends box to mine. Rebooted, Rescanned the transponder for C1, Rebooted again (had problems with my remote)

I backed up my config file and will do a comparison for my own peace of mind later."

So do we consider this case closed?

[IanJ]

Hi Jon,
Yip case closed. Still no idea what the difference was. But it's all go now. Just having some issues with freezing picture.....but I suspect that issue is down to other software I am running. (Does the DM600S need much free or swap space to function properly? I have no HDD fitted as yet)

Does anyone have a link to acceptable SNR (90+ %) & ACG (around 80%) levels?

Apologies for the cross posting and impatience. I just wasn't sure if the problem was a generic dreambox one or specific to Aus.


Thanks,
Ian