Neverending booting

Started by Stuart, 13 Mar 2021 15:10

booting et7000mini

Please log in to reply

12 replies to this topic

#1 Stuart

Member
16 posts

0

Neutral

Posted 13 March 2021 - 15:10

Hello!

I updated via menu LATEST openPLI 6.2 to openPLI 8.0. And got neverending "Booting" on my GI ET7000 mini. Tryed to flash via USB, but STB doen's see any of my USB devices.

How to fix this issue?

Re: Neverending booting #2 WanWizard

PLi® Core member
70,485 posts

+1,810

Excellent

Posted 13 March 2021 - 15:12

Does it reboot or does it restart Enigma?

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Neverending booting #3 Stuart

Member
16 posts

0

Neutral

Posted 13 March 2021 - 15:16

No, it doen's reboot (GI logo with Bootoing...). Enigma2 doen's started also.

Re: Neverending booting #4 Stuart

Member
16 posts

0

Neutral

Posted 13 March 2021 - 15:20

Telnet is possible btw

Tryed

init 4
opkg update && opkg upgrade
sync
reboot

But no changes (((

Edited by Stuart, 13 March 2021 - 15:24.

Re: Neverending booting #5 WanWizard

PLi® Core member
70,485 posts

+1,810

Excellent

Posted 13 March 2021 - 15:24

Ok, if you can login, it is Enigma crashing (and auto-restarting).

Check /home/root for crash logs, and see if you can find the cause. Could for example be a plugin that is no longer compatible.

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Neverending booting #6 Stuart

Member
16 posts

0

Neutral

Posted 13 March 2021 - 15:27

Here's my log:

OpenPLi Enigma2 crash log


crashdate=Thu Jan  1 01:00:31 1970
compiledate=Mar  8 2021
skin=Default Skin
sourcedate=2021-03-03
branch=release-8.0
rev=7645217
component=enigma2


kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M console=ttyS0,115200n8
imageissue=openpli 8.0-release %h




[gFBDC] no framebuffer available




dmesg


<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>SMP: Booting CPU1...
<4>Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
<4>Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
<6>CPU1 revision is: 0002a065 (Brcm4380)
<6>FPU revision is: 00130001
<6>SMP: CPU1 is running
<6>Brought up 2 CPUs
<6>devtmpfs: initialized
<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>NET: Registered protocol family 16
<6>USB0: power enable is active low; overcurrent is active low
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>media: Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>Bluetooth: Core ver 2.21
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>clocksource: Switched to clocksource wktmr
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>futex hash table entries: 512 (order: 3, 32768 bytes)
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>fuse init (API version 7.23)
<6>io scheduler noop registered
<6>io scheduler cfq registered (default)
<6>Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>console [ttyS0] disabled
<6>serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
<6>console [ttyS0] enabled
<6>bootconsole [early0] disabled
<3>serial8250 serial8250.0: unable to register port at index 1 (IO0 MEM10406840 IRQ63): -28
<3>serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM10406880 IRQ64): -28
<6>loop: module loaded
<6>ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
<6>ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>ahci strict-ahci.0: flags: ncq sntf stag clo slum part
<6>scsi host0: ahci
<6>scsi host1: ahci
<6>ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
<6>ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
<6>brcmstb_nand: NAND controller driver is loaded
<6>libphy: Fixed: probed
<7>__clk_enable: network [1]
<7>__clk_enable: enet [1]
<7>bcm7552_pm_genet_enable 00
<6>bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0
<6>libphy: bcmgenet MII bus: probed
<7>__clk_disable: enet [0]
<7>bcm7552_pm_genet_disable 00
<7>__clk_disable: network [0]
<6>usbcore: registered new interface driver r8152
<6>hso: /openpli/oe/release-8.0/build/tmp/work-shared/et7x00/kernel-source/drivers/net/usb/hso.c: Option Wireless
<6>usbcore: registered new interface driver hso
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
<6>usbcore: registered new interface driver ipheth
<6>usbcore: registered new interface driver cdc_ncm
<6>usbcore: registered new interface driver lg-vl600
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>__clk_enable: usb [1]
<7>bcm7552_pm_usb_enable 00
<6>ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
<6>ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
<6>ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>usbcore: registered new interface driver usb-storage
<6>mousedev: PS/2 mouse device common for all mice
<6>usbcore: registered new interface driver appletouch
<6>usbcore: registered new interface driver bcm5974
<6>usbcore: registered new interface driver synaptics_usb
<6>i2c /dev entries driver
<6>usbcore: registered new interface driver btusb
<6>hidraw: raw HID events driver (C) Jiri Kosina
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<5>Key type dns_resolver registered
<6>PM: CP0 COUNT/COMPARE frequency does not depend on divisor
<6>ata1: SATA link down (SStatus 0 SControl 300)
<6>EBI CS1: setting up NAND flash (primary)
<6>nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
<6>nand: AMD/Spansion S34ML02G2
<6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
<6>nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
<6>nand: AMD/Spansion S34ML02G2
<6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
<6>brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 32B OOB, 8-bit, BCH-4
<6>
<6>Bad block table found at page 131008, version 0x01
<6>Bad block table found at page 130944, version 0x01
<5>Creating 3 MTD partitions on "brcmnand.0":
<5>0x000000000000-0x000010000000 : "complete"
<5>0x000000000000-0x000000600000 : "kernel"
<5>0x000000600000-0x000010000000 : "rootfs"
<6>EBI CS0: setting up SPI flash
<6>spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
<6>spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
<4>m25p80 spi0.0: found s25sl032p, expected m25p80
<6>m25p80 spi0.0: s25sl032p (4096 Kbytes)
<5>ubi0: attaching mtd2
<6>usb 1-1: new high-speed USB device number 2 using ehci-brcm
<6>usb-storage 1-1:1.0: USB Mass Storage device detected
<6>scsi host2: usb-storage 1-1:1.0
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>usb 1-2: new high-speed USB device number 3 using ehci-brcm
<5>random: nonblocking pool is initialized
<5>scsi 2:0:0:0: Direct-Access     UFD 3.0  Silicon-Power32G 1.00 PQ: 0 ANSI: 5
<5>sd 2:0:0:0: Attached scsi generic sg0 type 0
<5>sd 2:0:0:0: [sda] 60620800 512-byte logical blocks: (31.0 GB/28.9 GiB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
<5>sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
<6> sda: sda1
<5>sd 2:0:0:0: [sda] Attached SCSI removable disk
<5>ubi0: scanning is finished
<5>ubi0: volume 0 ("rootfs") re-sized from 800 to 1956 LEBs
<5>ubi0: attached mtd2 (name "rootfs", size 250 MiB)
<5>ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>ubi0: good PEBs: 1996, bad PEBs: 4, corrupted PEBs: 0
<5>ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1680600265
<5>ubi0: available PEBs: 0, total reserved PEBs: 1996, PEBs reserved for bad PEB handling: 36
<5>ubi0: background thread "ubi_bgt0d" started, PID 87
<6>ALSA device list:
<6>  No soundcards found.
<5>UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 88
<5>UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS (ubi0:0): FS size: 246968320 bytes (235 MiB, 1945 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6A206AC8-9187-4D43-A798-501593F97619, small LPT model
<6>VFS: Mounted root (ubifs filesystem) on device 0:14.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 280K (8091a000 - 80960000)
<4>BKNI_Fail: forcing oops
<1>CPU 1 Unable to handle kernel paging request at virtual address 00000000, epc == e1fcd9e8, ra == e1fcd9e0
<4>Oops[#1]:
<4>CPU: 1 PID: 132 Comm: modprobe Tainted: G           O    4.4.8 #1
<4>task: af539368 ti: adbf0000 task.ti: adbf0000
<4>$ 0   : 00000000 10008b00 00000000 808de314
<4>$ 4   : e2560000 10008b01 000000dd 00000000
<4>$ 8   : 80970000 00000000 808e0000 6963726f
<4>$12   : 000000dd ffffffe0 00000000 00000006
<4>$16   : e2560000 adbf1c08 8038d01c 00000010
<4>$20   : e2560000 adbf1ed0 0000001c ac4fcc88
<4>$24   : 00000018 803b9b70
<4>$28   : adbf0000 adbf1bd0 00000028 e1fcd9e0
<4>Hi    : 00000000
<4>Lo    : 00000000
<4>epc   : e1fcd9e8 BKNI_Fail+0x38/0x6c [dvb]
<4>ra    : e1fcd9e0 BKNI_Fail+0x30/0x6c [dvb]
<4>Status: 10008b03     KERNEL EXL IE
<4>Cause : 00800008 (ExcCode 02)
<4>BadVA : 00000000
<4>PrId  : 0002a065 (Brcm4380)
<4>Modules linked in: dvb(O+) modloader2(O) modloader(O) tpm(O)
<4>Process modprobe (pid: 132, threadinfo=adbf0000, task=af539368, tls=774a74a0)
<4>Stack : 00000000 00000000 00000069 00000069 00000000 00000000 e258b2f8 e1d957cc
<4>       00000001 80003df0 e257a760 0000001c e20489f0 0000016c 6d637262 5f77685f
<4>       6967616d 00000063 00000014 0000001c e203887c 00000523 0000001c e1fcd568
<4>       e258b2f8 8038d01c 00000010 e2560000 adbf1ed0 0000001c ac4fcc88 e257a988
<4>       e258b2f8 8038d01c 00000010 e2560000 e257a900 e258b2f8 8038d01c 00000010
<4>       ...
<4>Call Trace:
<4>[<e1fcd9e8>] BKNI_Fail+0x38/0x6c [dvb]
<4>[<e1d957cc>] init_module+0x0/0x2b0 [dvb]
<4>
<4>
<4>Code: 00000000  8fa20014  3c04e256 <8c420000> 2484a078  afa20014  8fa30010  8fa20014  0043001a
<4>---[ end trace be76b58428c5ab9a ]---
<30>udevd[143]: starting version 3.2.8
<30>udevd[144]: starting eudev-3.2.8
<6>usb 1-2: reset high-speed USB device number 3 using ehci-brcm
<6>ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
<6>ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
<7>ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>usbcore: registered new interface driver rt2800usb
<6>EXT4-fs (sda1): recovery complete
<6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<7>__clk_enable: network [1]
<7>__clk_enable: enet [1]
<7>bcm7552_pm_genet_enable 00
<6>bcmgenet bcmgenet.0: configuring instance for internal PHY
<6>bcmgenet bcmgenet.0 eth0: Link is Down
<6>NET: Registered protocol family 10
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

When start Enigma2 by hands got:

root@et7x00:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 11
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
Segmentation fault

But why I can't downgrade from USB flash to openPLI 6.2?

Edited by Stuart, 13 March 2021 - 15:29.

Re: Neverending booting #7 Stuart

Member
16 posts

0

Neutral

Posted 13 March 2021 - 15:31

And one more log without flash:

OpenPLi Enigma2 crash log


crashdate=Thu Jan  1 01:00:22 1970
compiledate=Mar  8 2021
skin=Default Skin
sourcedate=2021-03-03
branch=release-8.0
rev=7645217
component=enigma2


kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M console=ttyS0,115200n8
imageissue=openpli 8.0-release %h




[gFBDC] no framebuffer available




dmesg


<7>  Normal zone: 1536 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 131072 pages, LIFO batch:31
<4>Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
<4>Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
<6>PERCPU: Embedded 11 pages/cpu @81606000 s12944 r8192 d23920 u45056
<7>pcpu-alloc: s12944 r8192 d23920 u45056 alloc=11*4096
<7>pcpu-alloc: [0] 0 [0] 1
<6>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
<5>Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M console=ttyS0,115200n8
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 311288K/524288K available (7497K kernel code, 305K rwdata, 1504K rodata, 280K init, 134K bss, 213000K reserved, 0K cma-reserved)
<6>Hierarchical RCU implementation.
<6>     Build-time adjustment of leaf fanout to 32.
<6>NR_IRQS:160
<6>Measuring MIPS counter frequency...
<6>Detected MIPS clock frequency: 751 MHz (375.763 MHz counter)
<6>clocksource: wktmr: mask: 0xffffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 2147483647500000ns
<6>Console: colour dummy device 80x25
<6>Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>SMP: Booting CPU1...
<4>Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
<4>Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
<6>CPU1 revision is: 0002a065 (Brcm4380)
<6>FPU revision is: 00130001
<6>SMP: CPU1 is running
<6>Brought up 2 CPUs
<6>devtmpfs: initialized
<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>NET: Registered protocol family 16
<6>USB0: power enable is active low; overcurrent is active low
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>media: Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>Bluetooth: Core ver 2.21
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>clocksource: Switched to clocksource wktmr
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>futex hash table entries: 512 (order: 3, 32768 bytes)
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>fuse init (API version 7.23)
<6>io scheduler noop registered
<6>io scheduler cfq registered (default)
<6>Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>console [ttyS0] disabled
<6>serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
<6>console [ttyS0] enabled
<6>bootconsole [early0] disabled
<3>serial8250 serial8250.0: unable to register port at index 1 (IO0 MEM10406840 IRQ63): -28
<3>serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM10406880 IRQ64): -28
<6>loop: module loaded
<6>ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
<6>ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>ahci strict-ahci.0: flags: ncq sntf stag clo slum part
<6>scsi host0: ahci
<6>scsi host1: ahci
<6>ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
<6>ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
<6>brcmstb_nand: NAND controller driver is loaded
<6>libphy: Fixed: probed
<7>__clk_enable: network [1]
<7>__clk_enable: enet [1]
<7>bcm7552_pm_genet_enable 00
<6>bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0
<6>libphy: bcmgenet MII bus: probed
<7>__clk_disable: enet [0]
<7>bcm7552_pm_genet_disable 00
<7>__clk_disable: network [0]
<6>usbcore: registered new interface driver r8152
<6>hso: /openpli/oe/release-8.0/build/tmp/work-shared/et7x00/kernel-source/drivers/net/usb/hso.c: Option Wireless
<6>usbcore: registered new interface driver hso
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
<6>usbcore: registered new interface driver ipheth
<6>usbcore: registered new interface driver cdc_ncm
<6>usbcore: registered new interface driver lg-vl600
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>__clk_enable: usb [1]
<7>bcm7552_pm_usb_enable 00
<6>ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
<6>ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
<6>ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>usbcore: registered new interface driver usb-storage
<6>mousedev: PS/2 mouse device common for all mice
<6>usbcore: registered new interface driver appletouch
<6>usbcore: registered new interface driver bcm5974
<6>usbcore: registered new interface driver synaptics_usb
<6>i2c /dev entries driver
<6>usbcore: registered new interface driver btusb
<6>hidraw: raw HID events driver (C) Jiri Kosina
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<5>Key type dns_resolver registered
<6>PM: CP0 COUNT/COMPARE frequency does not depend on divisor
<6>ata1: SATA link down (SStatus 0 SControl 300)
<6>EBI CS1: setting up NAND flash (primary)
<6>nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
<6>nand: AMD/Spansion S34ML02G2
<6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
<6>nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
<6>nand: AMD/Spansion S34ML02G2
<6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
<6>brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 32B OOB, 8-bit, BCH-4
<6>
<6>Bad block table found at page 131008, version 0x01
<6>Bad block table found at page 130944, version 0x01
<5>Creating 3 MTD partitions on "brcmnand.0":
<5>0x000000000000-0x000010000000 : "complete"
<5>0x000000000000-0x000000600000 : "kernel"
<5>0x000000600000-0x000010000000 : "rootfs"
<6>EBI CS0: setting up SPI flash
<6>spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
<6>spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
<4>m25p80 spi0.0: found s25sl032p, expected m25p80
<6>m25p80 spi0.0: s25sl032p (4096 Kbytes)
<5>ubi0: attaching mtd2
<6>ata2: SATA link down (SStatus 0 SControl 300)
<5>random: nonblocking pool is initialized
<5>ubi0: scanning is finished
<5>ubi0: attached mtd2 (name "rootfs", size 250 MiB)
<5>ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>ubi0: good PEBs: 1996, bad PEBs: 4, corrupted PEBs: 0
<5>ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1680600265
<5>ubi0: available PEBs: 0, total reserved PEBs: 1996, PEBs reserved for bad PEB handling: 36
<5>ubi0: background thread "ubi_bgt0d" started, PID 82
<6>ALSA device list:
<6>  No soundcards found.
<5>UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 83
<5>UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS (ubi0:0): FS size: 246968320 bytes (235 MiB, 1945 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6A206AC8-9187-4D43-A798-501593F97619, small LPT model
<6>VFS: Mounted root (ubifs filesystem) on device 0:14.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 280K (8091a000 - 80960000)
<4>BKNI_Fail: forcing oops
<1>CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == e1fc49e8, ra == e1fc49e0
<4>Oops[#1]:
<4>CPU: 0 PID: 127 Comm: modprobe Tainted: G           O    4.4.8 #1
<4>task: afe07228 ti: af504000 task.ti: af504000
<4>$ 0   : 00000000 10008700 00000000 808de314
<4>$ 4   : e2550000 10008701 000000d0 00000000
<4>$ 8   : 80970000 00000000 808e0000 6963726f
<4>$12   : 000000d0 ffffffe0 00000000 00000006
<4>$16   : e2550000 af505c08 8038d01c 00000010
<4>$20   : e2550000 af505ed0 0000001c ac4d1908
<4>$24   : 00000018 803b9b70
<4>$28   : af504000 af505bd0 00000028 e1fc49e0
<4>Hi    : 00000000
<4>Lo    : 00000000
<4>epc   : e1fc49e8 BKNI_Fail+0x38/0x6c [dvb]
<4>ra    : e1fc49e0 BKNI_Fail+0x30/0x6c [dvb]
<4>Status: 10008703     KERNEL EXL IE
<4>Cause : 00800008 (ExcCode 02)
<4>BadVA : 00000000
<4>PrId  : 0002a065 (Brcm4380)
<4>Modules linked in: dvb(O+) modloader2(O) modloader(O) tpm(O)
<4>Process modprobe (pid: 127, threadinfo=af504000, task=afe07228, tls=77de14a0)
<4>Stack : 00000000 00000000 00000069 00000069 00000000 00000000 e25822f8 e1d8c7cc
<4>       00000001 80003df0 e2571760 0000001c e203f9f0 0000016c 6d637262 5f77685f
<4>       6967616d 00000063 00000014 0000001c e202f87c 00000523 0000001c e1fc4568
<4>       e25822f8 8038d01c 00000010 e2550000 af505ed0 0000001c ac4d1908 e2571988
<4>       e25822f8 8038d01c 00000010 e2550000 e2571900 e25822f8 8038d01c 00000010
<4>       ...
<4>Call Trace:
<4>[<e1fc49e8>] BKNI_Fail+0x38/0x6c [dvb]
<4>[<e1d8c7cc>] init_module+0x0/0x2b0 [dvb]
<4>
<4>
<4>Code: 00000000  8fa20014  3c04e255 <8c420000> 24841078  afa20014  8fa30010  8fa20014  0043001a
<4>---[ end trace 206b14492c250f39 ]---
<30>udevd[138]: starting version 3.2.8
<30>udevd[139]: starting eudev-3.2.8
<7>__clk_enable: network [1]
<7>__clk_enable: enet [1]
<7>bcm7552_pm_genet_enable 00
<6>bcmgenet bcmgenet.0: configuring instance for internal PHY
<6>bcmgenet bcmgenet.0 eth0: Link is Down
<6>bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>NET: Registered protocol family 10

Re: Neverending booting #8 Stuart

Member
16 posts

0

Neutral

Posted 13 March 2021 - 16:09

Successfully flashed to 7.3.

Re: Neverending booting #9 WanWizard

PLi® Core member
70,485 posts

+1,810

Excellent

Posted 13 March 2021 - 16:20

You have a kernel crash when loading the drivers. What happens if you now flash 8.0 (or develop) again, from the menu?

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Neverending booting #10 Stuart

Member
16 posts

0

Neutral

Posted 13 March 2021 - 16:31

Hm, upgraded to 8.0 without problems (from USB, but renamed folder et7000mini to et7x00).

Re: Neverending booting #11 WanWizard

PLi® Core member
70,485 posts

+1,810

Excellent

Posted 13 March 2021 - 16:38

Ok. Could be simply data corruption somewhere.

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Neverending booting #12 Dimitrij

PLi® Core member
10,322 posts

+350

Excellent

Posted 13 March 2021 - 17:28

https://github.com/O...i/gfbdc.cpp#L14

https://github.com/o...i/gfbdc.cpp#L36

GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K

Re: Neverending booting #13 WanWizard

PLi® Core member
70,485 posts

+1,810

Excellent

Posted 13 March 2021 - 18:10

That is where the error message comes from yes. But the root cause was a memory addressing crash in the kernel, which causes the drivers not to load.

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Back to [EN] Enduser support

Also tagged with one or more of these keywords: booting, et7000mini

Backup dm 800 hd se

Started by wilpe, 9 Oct 2017

Booting

2 replies
1,057 views

3 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users

ATTENTION !!!

Neverending booting

#1 Stuart

Re: Neverending booting #2 WanWizard

Re: Neverending booting #3 Stuart

Re: Neverending booting #4 Stuart

Re: Neverending booting #5 WanWizard

Re: Neverending booting #6 Stuart

Re: Neverending booting #7 Stuart

Re: Neverending booting #8 Stuart

Re: Neverending booting #9 WanWizard

Re: Neverending booting #10 Stuart

Re: Neverending booting #11 WanWizard

Re: Neverending booting #12 Dimitrij

Re: Neverending booting #13 WanWizard

Also tagged with one or more of these keywords: booting, et7000mini

Backup dm 800 hd se

3 user(s) are reading this topic