50 replies to this topic

[ricki]

Yes 8.1 is the problem, does that mean I will not be able to to update to 8.1 or higher

[WanWizard]

It means a developer needs to have a look at the problem.

[ricki]

@ricki

Ahhh, this is not CryptoWorks! but CryptoCAM used in Scandinavia….

as you can see I am not an expert on encryptions, sorry

[betacentauri]

Difficult to say what's going wrong.   If you have the time, please install a develop/nightly image. Configure it so that you can watch TV. Remove the module, restart the box, zap to an encrypted channel. Open a telnet connection the box and execute this:

init 4
ENIGMA_DEBUG_LVL=5 enigma2 > /tmp/e2_ci_log.txt 2>&1

This will start e2 again. You should be still on the encrypted channel. If not, zap again to it. Wait 30 seconds and then insert the module. Wait again if something happens. If nothing happens after 1-2 minutes or the spinner appears, try to stop e2 by pressing Ctrl and c at the same time. This maybe fails. Nevertheless transfer the file /tmp/e2_ci_log.txt to your PC/notebook and post it here. If e2 stopped properly you can start it again with

init 3

If it didn't stop, you can open a new telnet session and execute this

killall -9 enigma2
reboot

This stops e2 and restarts the box, but please first get the file as the file is deleted during the reboot.

[ricki]

 i have time in a few hours

[ricki]

when I have insertet the module in after 10 seconds the enigma freezes losing contact with the box

[betacentauri]

And you cannot connect to the box via telnet (new session) or ftp to save the file?

Edited by betacentauri, 6 November 2021 - 12:21.

[ricki]

So i can t  watch encrypted channals at all.

[ricki]

And you cannot connect to the box via telnet (new session) or ftp to save the file?

no contact at all.

[betacentauri]

Then do the same but use this command:

ENIGMA_DEBUG_LVL=5 enigma2

Post the last output you see in the telnet window (at least the last 10-20 lines, better more)

[ricki]

explains what happened

when i insert the module nothin happened

when trying to swith channel everything freezes

[ricki]

here the log

Attached Files

•  enigma.20211105.debuglog.txt   399.39KB   2 downloads

Edited by ricki, 6 November 2021 - 12:50.

[betacentauri]

This log doesn't help me. It uses debug log level 4. I need one with log level 5.

[ricki]

Then please tell me step by step once more

Edited by ricki, 6 November 2021 - 13:43.

[betacentauri]

Can you access the box via telnet?

[ricki]

yes

[betacentauri]

Do you use putty?

 

 

Execute this

init 4
ENIGMA_DEBUG_LVL=5 enigma2

This first stops e2 and then starts it with log level 5. Wait until e2 is fully started.

Insert the CI module.

Wait some seconds (at least 30 seconds) until in the telnet window no new messages appear.

 

Copy the text from the telnet window into a text file and post it here.  

Edited by betacentauri, 6 November 2021 - 13:53.

[ricki]

i vill try now

Edited by ricki, 6 November 2021 - 14:11.

[ricki]

[CI] Slot 0 what 1                                                                                      [CI] ci inserted in slot 0                          [CI] Slot 0 no LV1 info: assume CI+ version 1       [CI] Slot 0 what 2                                                                                      [CI] Slot 0 what 1                                                                                      [CI] ci inserted in slot 0                          [CI] Slot 0 no LV1 info: assume CI+ version 1       [CI] Slot 0 what 2                                                                                      [CI] Slot 0 what 1                                                                                      [CI] ci inserted in slot 0                          [CI] Slot 0 no LV1 info: assume CI+ version 1       [CI] Slot 0 what 2                                                                                      [CI] Slot 0 what 1                                                                                      [CI] ci inserted in slot 0                          [CI] Slot 0 no LV1 info: assume CI+ version 1       [CI] Slot 0 what 2                                                                                   

[ricki]

[CI] Slot 0 what 1                                                                                                                                              [CI] ci inserted in slot 0                                                      [CI] Slot 0 no LV1 info: assume CI+ version 1                                   [CI] Slot 0 what 2                                                                                                                                              [CI] Slot 0 what 1                                                                                                                                              [CI] ci inserted in slot 0                                                      [CI] Slot 0 no LV1 info: assume CI+ version 1                                   [CI] Slot 0 what 2                                                                                                                                              [CI] Slot 0 what 1                                                                                                                                              [CI] ci inserted in slot 0                                                      [CI] Slot 0 no LV1 info: assume CI+ version 1                                   [CI] Slot 0 what 2                                                                                                                                              [CI] Slot 0 what 1                                                                                                                                              [CI] ci inserted in slot 0                                                      [CI] Slot 0 no LV1 info: assume CI+ version 1                                   [CI] Slot 0 what 2