openpli 8.0-release osmio4kplus
osmio4kplus login: root
Last login: Sun Dec 19 18:40:13 CET 2021 on pts/2
root@osmio4kplus:~# dmesg
Booting Linux on physical CPU 0x0
Linux version 5.14.0 (oe-user@oe-host) (arm-oe-linux-gnueabi-gcc (GCC) 9.2.0, GNU ld (GNU Binutils) 2.32.0.20190204) #1 SMP Tue Oct 5 11:52:30 UTC 2021
CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7), cr=30c5383d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: OSMIO4KPLUS
Memory policy: Data cache writealloc
Reserved memory: created CMA memory pool at 0x000000004c000000, size 384 MiB
OF: reserved mem: initialized node bmem@4c000000, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000000000000-0x00000000107fffff]
Normal empty
HighMem [mem 0x0000000010800000-0x000000007fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000007fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
psci: probing for conduit method from DT.
psci: PSCIv0.2 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
percpu: Embedded 16 pages/cpu s32780 r8192 d24564 u65536
pcpu-alloc: s32780 r8192 d24564 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists, mobility grouping on. Total pages: 523760
Kernel command line: root=/dev/mmcblk1p7 rootfstype=ext4 rootwait mitigations=off
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 1210668K/2097152K available (10240K kernel code, 749K rwdata, 2280K rodata, 2048K init, 391K bss, 493268K reserved, 393216K cma-reserved, 974848K highme m)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
GIC: Using split EOI/Deactivate mode
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0403000, parent irq: 89)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0201000, parent irq: 61)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0201a00, parent irq: 62)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0410640, parent irq: 91)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f04d1200, parent irq: 57)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f040a500, parent irq: 95)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0417400, parent irq: 96)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f040a540, parent irq: 93)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0417440, parent irq: 94)
irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0417480, parent irq: 98)
random: get_random_bytes called from start_kernel+0x458/0x598 with crng_init=0
arch_timer: cp15 timer(s) running at 27.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
Switching to timer-based delay loop, resolution 37ns
Console: colour dummy device 80x30
printk: console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x200000 - 0x200060
rcu: Hierarchical SRCU implementation.
brcmstb: biuctrl: MCP: Enabling write pairing
smp: Bringing up secondary CPUs ...
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
smp: Brought up 1 node, 2 CPUs
SMP: Total of 2 processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in HYP mode.
CPU: Virtualization extensions available.
devtmpfs: initialized
VFP support v0.3: implementor 42 architecture 3 part 10 variant 0 rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 512 (order: 3, 32768 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 256 KiB pool for atomic coherent allocations
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
/rdb/syscon@f0202400: Broadcom Brahma-B15 readahead cache
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
videodev: Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource arch_sys_counter
FS-Cache: Loaded
NET: Registered PF_INET protocol family
IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Initialise system trusted keyrings
workingset: timestamp_bits=30 max_order=19 bucket_order=0
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
fuse: init (API version 7.34)
NET: Registered PF_ALG protocol family
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
brcm-gisb-arb f0400000.gisb-arb: IRQ index 2 not found
brcm-gisb-arb f0400000.gisb-arb: registered irqs: 273, 274
brcm-sata-phy f0b10100.sata_phy: registered 1 port(s)
brcmstb-usb-phy f0b00200.usb-phy: IRQ wake not found
brcmstb-usb-phy f0b00200.usb-phy: IRQ wakeup not found
brcmstb-usb-phy f0b00200.usb-phy: Wake interrupt missing, system wake not supported
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 101, base_baud = 5062500) is a 16550A
serial serial0: tty port ttyS1 registered
f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 100, base_baud = 5062500) is a 16550A
printk: console [ttyS0] enabled
f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 102, base_baud = 5062500) is a 16550A
loop: module loaded
brcm-ahci f0b12000.sata: supply ahci not found, using dummy regulator
brcm-ahci f0b12000.sata: supply phy not found, using dummy regulator
platform f0b12000.sata:sata-port@0: supply target not found, using dummy regulator
brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_ALPM
brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
scsi host0: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x100 irq 87
brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
brcmstb_qspi f0200920.qspi: using bspi-mspi mode
spi-nor spi0.0: found w25q32, expected m25p80
spi-nor spi0.0: w25q32 (4096 Kbytes)
5 fixed-partitions partitions found on MTD device spi0.0
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000200000 : "flash0.bolt"
0x000000200000-0x000000210000 : "flash0.macadr"
0x000000210000-0x000000220000 : "flash0.nvram"
0x000000220000-0x000000230000 : "flash0.devtree"
0x000000000000-0x000000400000 : "flash0"
brcmstb_qspi f0416000.spi: using mspi mode
libphy: Fixed MDIO Bus: probed
bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
libphy: bcmgenet MII bus: probed
unimac-mdio unimac-mdio.0: Broadcom UniMAC MDIO bus
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ata1: SATA link down (SStatus 0 SControl 300)
ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus number 1
ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00300
ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus number 2
ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00500
ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
ohci-platform f0b00400.ohci_v2: Generic Platform OHCI controller
ohci-platform f0b00400.ohci_v2: new USB bus registered, assigned bus number 3
ohci-platform f0b00400.ohci_v2: irq 121, io mem 0xf0b00400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-platform f0b00600.ohci_v2: Generic Platform OHCI controller
ohci-platform f0b00600.ohci_v2: new USB bus registered, assigned bus number 4
ohci-platform f0b00600.ohci_v2: irq 124, io mem 0xf0b00600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
brcmstb-waketimer f0417680.waketimer: registered as rtc0
brcmstb-waketimer f0417680.waketimer: setting system clock to 1970-01-01T00:00:15 UTC (15)
brcmstb-waketimer f0417680.waketimer: registered, with irq 276
i2c /dev entries driver
brcmstb-i2c f040a300.i2c: upg_bsca@97500hz registered in interrupt mode
brcmstb-i2c f0417280.i2c: upg_bscb_aon@390000hz registered in interrupt mode
brcmstb-i2c f0417300.i2c: upg_bscc_aon@390000hz registered in interrupt mode
brcmstb-i2c f0417380.i2c: upg_bscd_aon@390000hz registered in interrupt mode
brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
bcm7038-wdt f040a5a8.watchdog: Registered BCM7038 Watchdog
usbcore: registered new interface driver btusb
brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
NET: Registered PF_PACKET protocol family
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
mmc0: SDHCI controller on f0200000.sdhci [f0200000.sdhci] using ADMA
Registering SWP/SWPB emulation handler
mmc1: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using ADMA
usb 1-1: new high-speed USB device number 2 using ehci-brcm
Loading compiled-in X.509 certificates
brcmstb-bmem bmem@0: assigned reserved memory node bmem@4c000000
OF: /pcie@f0460000: Missing device_type
brcm-pcie f0460000.pcie: host bridge /pcie@f0460000 ranges:
brcm-pcie f0460000.pcie: No bus range found for /pcie@f0460000, using [bus 00-ff]
brcm-pcie f0460000.pcie: MEM 0x00c0000000..0x00dfffffff -> 0x00c0000000
brcm-pcie f0460000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0000000000
brcm-pcie f0460000.pcie: link up, 2.5 GT/s PCIe x1 (!SSC)
brcm-pcie f0460000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci 0000:00:00.0: [14e4:7260] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot
PCI: bus0: Fast back to back transfers disabled
pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
PCI: bus1: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0xc0000000-0xc01fffff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
pcieport 0000:00:00.0: enabling device (0140 -> 0142)
pcieport 0000:00:00.0: PME: Signaling with IRQ 76
OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
mmc1: new high speed MMC card at address 0001
ALSA device list:
No soundcards found.
mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
mmcblk1boot0: mmc1:0001 8GTF4R 4.00 MiB
mmcblk1boot1: mmc1:0001 8GTF4R 4.00 MiB
mmcblk1rpmb: mmc1:0001 8GTF4R 512 KiB, chardev (249:0)
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host1: usb-storage 1-1:1.0
GPT:disk_guids don't match.
GPT:partition_entry_array_crc32 values don't match: 0x7b4014d9 != 0xe33cb2e9
GPT: Use GNU Parted to correct GPT errors.
mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
sdhci-brcmstb f0200000.sdhci: card claims to support voltages below defined range
sdhci-brcmstb f0200000.sdhci: no support for card's volts
mmc0: error -22 whilst initialising SDIO card
EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
devtmpfs: mounted
Freeing unused kernel image (initmem) memory: 2048K
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
usb 4-1: new full-speed USB device number 2 using ohci-platform
random: fast init done
avl6862: loading out-of-tree module taints kernel.
avl6862: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
scsi 1:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 3913728 512-byte logical blocks: (2.00 GB/1.87 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 1:0:0:0: [sda] No Caching mode page found
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI removable disk
dvbdev: DVB: registering new adapter (Broadcom BCM7xxx)
input: dreambox advanced remote control (native) as /devices/virtual/misc/brcmstb/input0
input: dreambox ir mouse as /devices/virtual/misc/brcmstb/input1
input: dreambox front panel as /devices/virtual/misc/brcmstb/input2
avl6261:avl_bsp_assoc_i2c_adapter(): assoc I2C for demod_id 0
avl6261: Firmware Version 1.8.27679 (3.8.5)
i2c i2c-2: avl6261: Airoha Technology AV201x successfully attached
misc brcmstb: DVB: registering adapter 0 frontend 0 (Availink AVL6261)...
avl6862: Firmware Version 2.0.24785 (2.19.23)
misc brcmstb: DVB: registering adapter 0 frontend 1 (Availink AVL6862)...
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
wlan: loading driver v4.5.25.53
hif_pci_probe:, con_mode= 0x0
PCI device id is 003e :003e
hif_pci 0000:01:00.0: enabling device (0140 -> 0142)
hif_pci_configure : num_desired MSI set to 0
Using PCI Legacy Interrupt
hif_pci_probe: ramdump base 0x(ptrval) size 2095136
ol_download_firmware: chip_id:0x5030000 board_id:0x0
Board extended Data download address: 0x0
__ol_transfer_bin_file: Loading setup file athsetup.bin
hif_pci 0000:01:00.0: Direct firmware load for athsetup.bin failed with error -2
__ol_transfer_bin_file: Failed to get athsetup.bin:-2
HTT: full reorder offload enabled
hif_pci 0000:01:00.0: Direct firmware load for wlan/wlan_mac.bin failed with error -2
Pkt log is disabled
target uses HTT version 3.27; host uses 3.28
*** Warning: host/target HTT versions are different, though compatible!
Host SW:4.5.25.53, FW:2.0.0.187, HW:QCA6174_REV3_2
ENTER sme_set_btc_coex_dutycycle = 30
ENTER sme_set_btc_coex_dutycycle =30
wlan: driver loaded in 858000
udevd[193]: starting version 3.2.8
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[194]: starting eudev-3.2.8
random: crng init done
random: 2 urandom warning(s) missed due to ratelimiting
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (mmcblk1p7): re-mounted. Opts: (null). Quota mode: disabled.
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
unimac-mdio-0:01: Broadcom BCM7260 PHY revision: 0x01
bcmgenet f0480000.ethernet: configuring instance for internal PHY
bcmgenet f0480000.ethernet eth0: Link is Down
bcmgenet f0480000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
dvb_demux: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
usb 4-1: USB disconnect, device number 2
usb 4-1: new full-speed USB device number 3 using ohci-platform
root@osmio4kplus:~# lsmod
Module Size Used by
wlan 3911680 0
cfg80211 315392 1 wlan
si2183 647168 0
brcmstb_osmio4kplus 5570560 37
avl6261 61440 1 brcmstb_osmio4kplus
brcmstb_decoder 20480 1 brcmstb_osmio4kplus
ci 28672 1 brcmstb_osmio4kplus
avl6862 352256 1 brcmstb_osmio4kplus
