Now I have installed the image for development with the help of yusb and the box does not start anymore the spinner is constantly spinning
OpenPLi develop
Re: OpenPLi develop #21
Re: OpenPLi develop #22
Posted 8 January 2022 - 16:32
LG 55UJ630V 4K UHD > Яндекс Станция Дуо Макс & Zgemma H7 S 4K UHD
Samsung QE55Q60A 4K UHD > Яндекс Станция Макс & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H
Re: OpenPLi develop #23
Posted 8 January 2022 - 16:32
@ato: The full version of OpenWebif from the creators of Github may not always work, due to the customization of OpenWebif for a particular Enigma2 distribution. But in general, it should work. I myself tried to download (reinstall) the Github version directly to OpenATV and it worked... but it already looked a little different.
Re: OpenPLi develop #24
Posted 8 January 2022 - 16:40
LG 55UJ630V 4K UHD > Яндекс Станция Дуо Макс & Zgemma H7 S 4K UHD
Samsung QE55Q60A 4K UHD > Яндекс Станция Макс & Zgemma H9 Twin 4K UHD <> LCD4linux met Samsung SPF 87H
Re: OpenPLi develop #25
Posted 8 January 2022 - 16:40
I've just build new images for my own boxes, and they work fine, so this issue will be resolved when the changes get into the next build, sometime tomorrow morning.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi develop #26
Posted 8 January 2022 - 16:42
Thank you! With these edits, everything works now.
Possible, if you are using a fixed IP address, that still had an issue. I don't use fixed IP's anywhere, so I hadn't noticed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi develop #27
Posted 8 January 2022 - 16:48
@ato: The full version of OpenWebif from the creators of Github may not always work, due to the customization of OpenWebif for a particular Enigma2 distribution. But in general, it should work. I myself tried to download (reinstall) the Github version directly to OpenATV and it worked... but it already looked a little different.
Re: OpenPLi develop #28
Posted 8 January 2022 - 18:02
Did you miss the "it has nothing to do with OpenWebif but with a change in Enigma which has now been fixed" higher up in this topic?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi develop #29
Posted 8 January 2022 - 18:24
Edited by ato, 8 January 2022 - 18:33.
Re: OpenPLi develop #30
Posted 8 January 2022 - 19:14
Re: OpenPLi develop #31
Posted 8 January 2022 - 20:37
See the previous post.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi develop #32
Posted 8 January 2022 - 21:51
Now I have installed the image for development with the help of yusb and the box does not start anymore the spinner is constantly spinning
If you've got a (auto)backup of your system, you can try to flash a previous version which doesn't contain the wrong version, use your backup to restore your settings and try to update in a few days again, by that time the fixed version will be available
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: OpenPLi develop #33
Posted 8 January 2022 - 23:48
Thank you So far I have installed stable version 8.1 (adrenaline is off scale) Yes, by the way, the boot logo for 8.1 is Excellent !!!! Botlogo's creator has a good sense of humor ))) if my development version hadn't broken, then I would never have seen this masterpiece
Alcohol for wimps. Strong people enjoy depression.
Re: OpenPLi develop #34
Re: OpenPLi develop #35
Posted 9 January 2022 - 12:12
My opinion is to sync the python3 branch with latest develop and keep doing in develop whatever you do. And sync again and again at a regular basis. The more time the python3 branch is left without updates from develop, the more difficult would be to sync with it, aka merge into it, when it's time.
Should I make a PR to sync python3 branch with the latest develop? Let me know.
Re: OpenPLi develop #36
Posted 9 January 2022 - 14:40
Chances are it will take many months before the py3 code is usable, we can't freeze everything for that long.
Regular rebasing is the best solution.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi develop #37
Posted 9 January 2022 - 14:53
...and maybe take into account that develop, since changing the development strategy to nightly build, is accessible to the public/users and (from what I recon) is widely used.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: OpenPLi develop #38
Posted 9 January 2022 - 15:01
I suggest a git rebase.
Also remove commits with git rebase to cleanup E2.
Removing all the up/down key fixes and the git reverts etc.
This all in a seperate branch first.
When everything correct, replace the existing python3 branch.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Re: OpenPLi develop #39
Posted 9 January 2022 - 15:57
+1
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users