Posted 15 July 2022 - 08:18
This attached file belongs to the git PLi py3 branch. It has a modification that I made.
1 unzip the zip.
2 RecordTimer.py put it in /usr/lib/enigma2/python/
3 restart enigma2
.....what happens if you use the timer for a recording?
RecordTimer.zip 12.76KB
2 downloads
Edited by fogonero, 15 July 2022 - 08:20.
Posted 15 July 2022 - 09:57
I did some more test, it happens when I program multiple recordings
when i program 1 recording its OK.
Posted 15 July 2022 - 10:14
it happens when I program the same program Monday to Friday
Posted 15 July 2022 - 10:38
it happens when I program the same program Monday to Friday
when you put the repeat events timer... go into /etc/enigma2/timers.xml open..
it what values does repeated have 0 or 1?
what value has rename_repeat 0 or 1?
Posted 15 July 2022 - 10:48
repeated 1
rename_repeat 31
Posted 15 July 2022 - 10:54
do you do it with auto timer?
rename repeat should be a boolean ... I don't understand that value.
Posted 15 July 2022 - 10:58
I think it's autotimer
Posted 15 July 2022 - 11:22
try what i send you....we will probably still have the problem...
if so.....then we may have to pass function bool and reupload a new RecordTimer file.
Posted 15 July 2022 - 11:32
has already, no go
Posted 15 July 2022 - 12:59
I don't understand what you mean.
We need to know what's going on in your box so we can investigate the issue.
There are two things I don't understand about that timer you uploaded,
it says it creates an event from Monday to Friday, but I don't see a auto-timer flag on it...
on the other hand I don't understand that repeated value.
Can you tell us what operation you follow to create the timer?
Posted 15 July 2022 - 13:32
This are my settings , what do you want more?
1_0_19_2B66_3F3_1_C00000_0_0_0_20220715143058.jpg 101.13KB
1 downloads
Edited by ricki, 15 July 2022 - 13:33.
Posted 15 July 2022 - 14:32
try now with this file....
same operation as before to place the file.
RecordTimer.zip 12.79KB
2 downloads
Posted 15 July 2022 - 15:21
It worked when I tested two different timer settings well done 
Posted 16 July 2022 - 15:45
Hello,
I did a clean install python3 latest image with my vu+Solo, the Solo is set to fallback tuner, after doing the settings ip address the channels from the solo2 dont load.
Before the clean install it worked, because i used the backup from 8.2, now with a clean install python3 the fallback tuner doesnt work anymore.
Must be a bug in python3.
Vu+Solo2 met OpenPLI Python3 DiSEqC A/B/C/D 2 kabels.
Vu+solo als fallback met OpenPLI Python3.
Posted 16 July 2022 - 20:11
Hello,
I did a clean install python3 latest image with my vu+Solo, the Solo is set to fallback tuner, after doing the settings ip address the channels from the solo2 dont load.
Before the clean install it worked, because i used the backup from 8.2, now with a clean install python3 the fallback tuner doesnt work anymore.
Must be a bug in python3.
In Debug log.
[Import Channels] URLError HTTP Error 500: Internal Server Error
Don't know how to solve it, perhaps someone else?
Install a channel settings list from feed or use DreamboxEDIT or so for now.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Posted 16 July 2022 - 21:28
Hello,
I did a clean install python3 latest image with my vu+Solo, the Solo is set to fallback tuner, after doing the settings ip address the channels from the solo2 dont load.
Before the clean install it worked, because i used the backup from 8.2, now with a clean install python3 the fallback tuner doesnt work anymore.
Must be a bug in python3.
In Debug log.
[Import Channels] URLError HTTP Error 500: Internal Server ErrorDon't know how to solve it, perhaps someone else?
Install a channel settings list from feed or use DreamboxEDIT or so for now.
Only thing that makes it work is set the VU solo in fallback tuner with openpli 8.2 make a backup online flash it to python3 and set the backup from 8.2 back.
Vu+Solo2 met OpenPLI Python3 DiSEqC A/B/C/D 2 kabels.
Vu+solo als fallback met OpenPLI Python3.
Posted 16 July 2022 - 22:43
Debug log van het probleem.
Op het scherm zie ik alleen maar dat de favorieten leeg zijn.
enigma.20220716.debuglog.txt 23.03KB
5 downloads
Vu+Solo2 met OpenPLI Python3 DiSEqC A/B/C/D 2 kabels.
Vu+solo als fallback met OpenPLI Python3.
Posted 17 July 2022 - 06:16
You need to enable the option 'Also import at reboot/restart enigma2'.
Avahi] avahi_timeout_free [Avahi] avahi_timeout_update [Import Channels] Get EPG Location [Import Channels] URLError HTTP Error 500: Internal Server Error [Import Channels] URLError HTTP Error 500: Internal Server Error [eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv [eDVBDB] 1 entries in Bouquet bouquets.tv [eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio [eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio [eDVBDB] 1 entries in Bouquet bouquets.radio [eDVBDB] Renumbering... [eDVBDB] ---- opening lame channel db [eDVBDB] reading services (version 4)
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Posted 17 July 2022 - 07:19
https://github.com/O...38a54f8005658e2
Unfortunately still -URLError HTTP Error 500: Internal Server Error- for me.
You can try file before online update.
Upload file to
/usr/lib/enigma2/python/Components/
Restart Enigma2 and remove file after test, otherwise it will be always there and block all online updates for ImportChannels.pyc.
ImportChannels.py 7.6KB
2 downloads
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
0 members, 19 guests, 0 anonymous users
