Jump to content


Photo

OpenPLi-py3


  • Please log in to reply
1139 replies to this topic

Re: OpenPLi-py3 #641 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,487 posts

+397
Excellent

Posted 3 October 2022 - 17:46

Just tested this NB by flashing the image of October 2th via the online flash procedure. The result is as follows.

As far as I’ve checked Enigma seems to start over and over again. I will try to perform more tests but due to circumstances this might not be possible this evening.


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: OpenPLi-py3 #642 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,940 posts

+191
Excellent

Posted 3 October 2022 - 17:54

Did a

init 3 

ENIGMA_DEBUG_LVL=4 enigma2 2>&1 | tee ./enigma.log

Attached the log

 

Attached Files


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: OpenPLi-py3 #643 littlesat

  • PLi® Core member
  • 57,062 posts

+698
Excellent

Posted 3 October 2022 - 18:09

Traceback (most recent call last):

File "/usr/lib/enigma2/python/StartEnigma.py", line 589, in <module>
Components.Lcd.InitLcd()
File "/usr/lib/enigma2/python/Components/Lcd.py", line 80, in InitLcd
File "/usr/lib/enigma2/python/Components/config.py", line 133, in addNotifier
File "/usr/lib/enigma2/python/Components/Lcd.py", line 66, in setLCDcontrast
File "/usr/lib/enigma2/python/Components/Lcd.py", line 34, in setContrast
TypeError: in method 'eLCD_setLCDContrast', argument 2 of type 'int'


WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: OpenPLi-py3 #644 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,940 posts

+191
Excellent

Posted 3 October 2022 - 18:15

:thumbs-up:


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: OpenPLi-py3 #645 ims

  • PLi® Core member
  • 13,764 posts

+214
Excellent

Posted 3 October 2022 - 21:38

Congratulations on detective work, but when I merged fix on 2022.10.02., it cannot be in build 2022.10.02...

Attached Files

  • Attached File  lcd.JPG   18.83KB   10 downloads

Kdo nic nedělá, nic nezkazí!

Re: OpenPLi-py3 #646 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,940 posts

+191
Excellent

Posted 4 October 2022 - 07:40

Sorry, missed it, will test after the build  ;)


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: OpenPLi-py3 #647 ims

  • PLi® Core member
  • 13,764 posts

+214
Excellent

Posted 4 October 2022 - 08:18

:)


Kdo nic nedělá, nic nezkazí!

Re: OpenPLi-py3 #648 foxbob

  • Senior Member
  • 624 posts

+18
Neutral

Posted 4 October 2022 - 17:42

Good evening. Can anyone check the kodi?I'm getting an error when I try to play a link through the enigma2 player.

2022-10-04 17:37:19.5838 Traceback (most recent call last):
2022-10-04 17:37:19.5840   File "/usr/lib/enigma2/python/Plugins/Extensions/Kodi/plugin.py", line 730, in messageReceived
2022-10-04 17:37:19.5941     self.handleExitMessage(status, data)
2022-10-04 17:37:19.5942   File "/usr/lib/enigma2/python/Plugins/Extensions/Kodi/plugin.py", line 745, in handleExitMessage
2022-10-04 17:37:19.5953     self.stopTimer.callback.append(KODI_LAUNCHER.stop)
2022-10-04 17:37:19.5955 AttributeError: 'NoneType' object has no attribute 'stop'
2022-10-04 17:37:19.5955 [ePyObject] (CallObject(<bound method E2KodiExtServer.messageReceived of <Plugins.Extensions.Kodi.plugin.E2KodiExtServer object at 0xb106b2b0>>,(0,)) failed)



Re: OpenPLi-py3 #649 foxbob

  • Senior Member
  • 624 posts

+18
Neutral

Posted 19 October 2022 - 18:07

Little error on startup openmultiboot manager.

After fixing the plugin works.

<   485.0271> [Screen] Showing screen '['OMBManagerList_summary', 'SimpleSummary']'.
<   485.0296> [Screen] Showing screen 'OMBManagerList'.
<   485.4804> [CI SESS] slot: 0x303a28
<   485.8827> [BT] retry audio connect, 0d:1e:c9:50:06:cb
<   486.1376> [CI SESS] slot: 0x303a28
<   486.3829> [BT] request audio connect, 0d:1e:c9:50:06:cb
<   486.7945> [CI SESS] slot: 0x303a28
<   492.7191> [eEPGChannelData] schedule finished(1666197068)
<   492.7198> [eEPGChannelData] stop caching events(1666197068)
<   492.7198> [eEPGChannelData] next update in 60 min
<   493.8885> [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
<   497.6649> [ActionMap] Keymap 'ColorActions' -> Action = 'green'.
<   497.6709> [Skin] Processing screen 'OMBManagerInstall', position=(0, 0), size=(1920 x 1080) for module 'OMBManagerInstall'.
<   497.6825> [Skin] Processing screen 'SimpleSummary' from list 'OMBManagerInstall_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'SimpleSummary'.
<   497.6840> [Screen] Showing screen '['OMBManagerInstall_summary', 'SimpleSummary']'.
<   497.6899> [Screen] Showing screen 'OMBManagerInstall'.
<   500.5615> [ActionMap] Keymap 'SetupActions' -> Action = 'ok'.
<   500.5676> [Skin] Processing screen 'ChoiceBox', position=(0, 0), size=(1920 x 1080) for module 'ChoiceBox'.
<   500.5737> [Screen] Warning: Skin is missing element 'autoresize' in <class 'Screens.ChoiceBox.ChoiceBox'>.
<   500.5767> [Skin] Processing screen 'ChoiceBox_summary' from list 'ChoiceBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'SimpleSummary'.
<   500.5775> [Screen] Showing screen '['ChoiceBox_summary', 'SimpleSummary']'.
<   500.5778> [Screen] Showing screen '['ChoiceBox']'.
<   502.8602> [ActionMap] Keymap 'WizardActions' -> Action = 'ok'.
<   502.8614> [Screen] Showing screen '['OMBManagerInstall_summary', 'SimpleSummary']'.
<   502.8638> [Screen] Showing screen 'OMBManagerInstall'.
<   502.8674> [Skin] Processing screen 'MessageBox', position=(0, 0), size=(1920 x 1080) for module 'MessageBox'.
<   502.8743> [Screen] Warning: Skin is missing element 'autoresize' in <class 'Screens.MessageBox.MessageBox'>(Please wait while installation is in progress.
This operation may take a while.).<   502.8743> 
<   502.8792> [Skin] Processing screen 'MessageBox_summary' from list 'MessageBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'SimpleSummary'.
<   502.8803> [Screen] Showing screen '['MessageBox_summary', 'SimpleSummary']'.
<   502.8806> [Screen] Showing screen 'MessageBox'.
<   506.9131> [gRC] main thread is non-idle! display spinner!
<   507.0735> [CI SESS] slot: 0x303a28
Archive:  /media/hdd/open-multiboot-upload/openatv-7.1-vuultimo4k-20221002_usb.zip
  inflating: vuplus/ultimo4k/imageversion
  inflating: vuplus/ultimo4k/initrd_auto.bin
  inflating: vuplus/ultimo4k/kernel_auto.bin
  inflating: vuplus/ultimo4k/mkpart.update
  inflating: vuplus/ultimo4k/reboot.update
  inflating: vuplus/ultimo4k/rootfs.tar.bz2
  inflating: vuplus/ultimo4k/splash_auto.bin
<   515.7967> [CI SESS] slot: 0x303a28
<   536.7275> [CI SESS] slot: 0x303a28
<   545.4515> [CI SESS] slot: 0x303a28
<   566.3835> [CI SESS] slot: 0x303a28
<   575.1065> [CI SESS] slot: 0x303a28
<   596.0376> [CI SESS] slot: 0x303a28
<   604.7606> [CI SESS] slot: 0x303a28
<   615.3201> [Screen] Showing screen '['OMBManagerInstall_summary', 'SimpleSummary']'.
<   615.3220> [eDVBPESReader] ERROR reading PES (fd=59): Value too large for defined data type
<   615.3703> [Screen] Showing screen '['OMBManagerList_summary', 'SimpleSummary']'.
<   615.3717> [Screen] Showing screen 'OMBManagerInstall'.
<   615.4057> [Screen] Showing screen 'OMBManagerList'.
  File "/usr/lib/enigma2/python/Plugins/Extensions/OpenMultiboot/open-multiboot-branding-helper.py", line 82
    print " "
          ^
SyntaxError: Missing parentheses in call to 'print'. Did you mean print(" ")?
  File "/usr/lib/enigma2/python/Plugins/Extensions/OpenMultiboot/open-multiboot-branding-helper.py", line 82
    print " "
          ^
SyntaxError: Missing parentheses in call to 'print'. Did you mean print(" ")?
<   621.9014> [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
<   621.9077> [Skin] Processing screen 'MessageBox', position=(0, 0), size=(1920 x 1080) for module 'MessageBox'.
<   621.9151> [Screen] Warning: Skin is missing element 'autoresize' in <class 'Screens.MessageBox.MessageBox'>(Set next boot to openatv-7.1-vuultimo4k-20221002_usb ?
OMB enabled.).<   621.9151> 
<   621.9196> [Skin] Processing screen 'MessageBox_summary' from list 'MessageBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'SimpleSummary'.
<   621.9207> [Screen] Showing screen '['MessageBox_summary', 'SimpleSummary']'.
<   621.9211> [Screen] Showing screen 'MessageBox'.
<   624.4572> [ActionMap] Keymap 'MsgBoxActions' -> Action = 'ok'.
<   624.4584> [Screen] Showing screen '['OMBManagerList_summary', 'SimpleSummary']'.
<   624.4610> [Screen] Showing screen 'OMBManagerList'.
<   624.4620> [OMB] set nextboot to openatv-7.1-vuultimo4k-20221002_usb
<   624.4667> [Skin] Processing screen 'MessageBox', position=(0, 0), size=(1920 x 1080) for module 'MessageBox'.
<   624.4741> [Screen] Warning: Skin is missing element 'autoresize' in <class 'Screens.MessageBox.MessageBox'>(Do you want to reboot now ?).
<   624.4785> [Skin] Processing screen 'MessageBox_summary' from list 'MessageBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'SimpleSummary'.
<   624.4796> [Screen] Showing screen '['MessageBox_summary', 'SimpleSummary']'.
<   624.4799> [Screen] Showing screen 'MessageBox'.
<   625.6945> [CI SESS] slot: 0x303a28
<   626.2695> [ActionMap] Keymap 'DirectionActions' -> Action = 'down'.
<   626.5003> [ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
<   626.6145> [ActionMap] Keymap 'MsgBoxActions' -> Action = 'ok'.
<   626.6156> [Screen] Showing screen '['OMBManagerList_summary', 'SimpleSummary']'.
<   626.6181> [Screen] Showing screen 'OMBManagerList'.

Attached Files



Re: OpenPLi-py3 #650 littlesat

  • PLi® Core member
  • 57,062 posts

+698
Excellent

Posted 19 October 2022 - 18:13

Not py3 compatible print commands…

Edited by littlesat, 19 October 2022 - 18:13.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: OpenPLi-py3 #651 foxbob

  • Senior Member
  • 624 posts

+18
Neutral

Posted 19 October 2022 - 18:37

Most likely they just forgot to add parentheses.



Re: OpenPLi-py3 #652 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 19 October 2022 - 23:30

Prints are usually the first commands converted. So if those are still py2, chances are the rest is too.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi-py3 #653 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 October 2022 - 04:57

Most likely, foxbob's own plugins repo is not in sync with dev branch openmulitboot plugin.

https://github.com/o...nding-helper.py


Edited by Beeker, 20 October 2022 - 04:58.

Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: OpenPLi-py3 #654 dudule22

  • Senior Member
  • 319 posts

+4
Neutral

Posted 20 October 2022 - 05:38

Plugin HBBTV doesn't work on DUO4k. (nothing detected)



Re: OpenPLi-py3 #655 marto

  • Senior Member
  • 121 posts

+7
Neutral

Posted 20 October 2022 - 07:01

Plugin HBBTV doesn't work on DUO4k. (nothing detected)

Same here on Ultimo 4K. End of September was working fine, but looks like something in October builds has been broken making it inoperative.


VU+ Ultimo 4K; Clarke-Tech et9000


Re: OpenPLi-py3 #656 ricki

  • Senior Member
  • 604 posts

+3
Neutral

Posted 20 October 2022 - 15:23

after the recording is over I get a green screen

Attached Files



Re: OpenPLi-py3 #657 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 20 October 2022 - 15:30

Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/VfdControl/plugin.py", line 183, in vrime
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/VfdControl/plugin.py", line 126, in prikaz
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/VfdControl/plugin.py", line 196, in RecordingLed
TypeError: in method 'eLCD_setLCDBrightness', argument 2 of type 'int'
[ePyObject] (CallObject(<bound method Channelnumber.vrime of <Plugins.SystemPlugins.VfdControl.plugin.Channelnumber object at 0xb1f9ddd8>>,()) failed)

Is that with an update develop image? I tought this was already addressed?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi-py3 #658 ricki

  • Senior Member
  • 604 posts

+3
Neutral

Posted 20 October 2022 - 15:33

not to days update



Re: OpenPLi-py3 #659 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 20 October 2022 - 16:23

Try with next update

 

https://github.com/O...11b00cf04a6b5f9


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: OpenPLi-py3 #660 ricki

  • Senior Member
  • 604 posts

+3
Neutral

Posted 24 October 2022 - 13:15

Try with next update

 

https://github.com/O...11b00cf04a6b5f9


:)Thank you :) 




16 user(s) are reading this topic

0 members, 16 guests, 0 anonymous users