openpli-develop ... did you removed installeripk from the feed because i could not find him ?
OpenPLi-py3
Re: OpenPLi-py3 #661
Re: OpenPLi-py3 #662
Re: OpenPLi-py3 #663
Posted 29 October 2022 - 15:23
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: OpenPLi-py3 #664
Posted 30 October 2022 - 13:25
Not needed at all…. Just put the ipk on the root of an usb stick and insert the stick or for auto install put it in the backup folder (when no harddisk put it on the backup subfolder of an usb stick)
I tried it, but it does not work (anymore) (PLi 8.3 and NB), I get "no displayable files found on media" a simple opkg install *.ipk installs it.
Tried it with PLi 8.2 and this works, but this still has softwaremanager so it seems related.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: OpenPLi-py3 #665
Re: OpenPLi-py3 #666
Re: OpenPLi-py3 #667
Posted 31 October 2022 - 10:33
Here it works with put the ipk om the Root of the usb and then insert it…. No software manager Needed… ensure the usb is correctly formatted!
I just also tested. The message "no displayable files found on media" was shown as @40H3X reported.
Then I installed the softwaremanager and again I plugged in the USB stick. Now the IPK was recognized and could be installed. So somehow the softwaremanager seems necessary anyway.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: OpenPLi-py3 #668
Posted 31 October 2022 - 14:24
Re: OpenPLi-py3 #669
Re: OpenPLi-py3 #670
Re: OpenPLi-py3 #671
Posted 31 October 2022 - 16:03
Might be we need something to be adapt for py3? As far I remember it should be included.
As Release 8.3 shows the same behavior, so no IPK is being recognized, this has nothing to do with Python3 IMHO.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: OpenPLi-py3 #672
Posted 31 October 2022 - 16:31
As mentioned before, some features of software manager need to be moved to the main image before the plugin can be repired, this is one, the "package management" menu option is another one.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi-py3 #673
Re: OpenPLi-py3 #674
Posted 31 October 2022 - 18:50
If nobody fixes it, it won't get fixed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi-py3 #675
Re: OpenPLi-py3 #676
Posted 1 November 2022 - 14:16
here is the log when I attach USB Stick with an .ipk in root, image is older nightly Python2 which became now 8.3, the choicebox pops up with menu item "Install extensios", can someone post the log where no detection works
[Hotplug.plugin.py] connection! [Hotplug.plugin.py] complete ACTION=remove[Hotplug.plugin.py] connection lost! [Hotplug.plugin.py]: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/f0470500.ehci/usb2/2-1/2-1:1.0/host2/target2:0:0/2:0:0:0/block/sdb/sdb1'} [Harddisk] Failed to get model: [Errno 2] No such file or directory: '/sys/block/sdb/device/vendor' [Hotplug.plugin.py] connection! [Hotplug.plugin.py] complete ACTION=remove[Hotplug.plugin.py] connection lost! [Hotplug.plugin.py]: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/f0470500.ehci/usb2/2-1/2-1:1.0/host2/target2:0:0/2:0:0:0/block/sdb'} [Hotplug.plugin.py] connection! [Hotplug.plugin.py] complete ACTION=add[Hotplug.plugin.py] connection lost! [Hotplug.plugin.py]: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/f0470500.ehci/usb2/2-1/2-1:1.0/host2/target2:0:0/2:0:0:0/block/sdb'} couldn't read model: [Errno 2] No such file or directory: '/sys-/model' [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb [Hotplug.plugin.py] connection! [Hotplug.plugin.py] complete ACTION=add[Hotplug.plugin.py] connection lost! [Hotplug.plugin.py]: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/f0470500.ehci/usb2/2-1/2-1:1.0/host2/target2:0:0/2:0:0:0/block/sdb/sdb1'} couldn't read model: [Errno 2] No such file or directory: '/sys-/model' mountpoint /media/STICK_16GB description External Storage sdb force_mounted True scanning ('External Storage sdb', '/media/STICK_16GB', <__main__.Session instance at 0xb2800c38>) scanner: [<Scanner Movie>, <Scanner Video CD>, <Scanner Music>, <Scanner Audio-CD>, <Scanner Opkg>, <Scanner Pictures>] [Skin] Processing screen 'ChoiceBox', position=(315, 65), size=(650 x 590) for module 'ChoiceBox'. [Screen] Warning: Skin is missing element 'description' in <class 'Screens.ChoiceBox.ChoiceBox'>. [Skin] Attribute 'enableWrapAround' (with value of '1') in object of type 'eLabel' is not implemented! [Screen] Warning: Skin is missing element 'autoresize' in <class 'Screens.ChoiceBox.ChoiceBox'>. [Skin] Parsing embedded skin '<embedded-in-SimpleSummary>'. [Skin] Processing screen '<embedded-in-SimpleSummary>' from list 'ChoiceBox_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'. [Screen] Showing screen '['ChoiceBox_summary', 'SimpleSummary']'. [Screen] Showing screen '['ChoiceBox']'.
Re: OpenPLi-py3 #677
Posted 2 November 2022 - 11:59
NB py3 2022/10/22 Vanilla
[Hotplug.plugin.py] connection! [Hotplug.plugin.py] complete ACTION=add[Hotplug.plugin.py] connection lost! [Hotplug.plugin.py]: {'ACTION': 'add', 'DEVPATH': '/devices/platform/soc/f9890000.ehci/usb1/1-2/1-2.4/1-2.4:1.0/host1/target1:0:0/1:0:0:0/block/sda', 'PHYSDEVPATH': '-'} couldn't read model: [Errno 2] No such file or directory: '/sys-/model' [Harddisk] new device=sda dev_path=/dev/sda disk_path=/dev/sda removable=True internal=False rotational=1 card=False [Hotplug.plugin.py] connection! [Hotplug.plugin.py] complete ACTION=add[Hotplug.plugin.py] connection lost! [Hotplug.plugin.py]: {'ACTION': 'add', 'DEVPATH': '/devices/platform/soc/f9890000.ehci/usb1/1-2/1-2.4/1-2.4:1.0/host1/target1:0:0/1:0:0:0/block/sda/sda1', 'PHYSDEVPATH': '-'} couldn't read model: [Errno 2] No such file or directory: '/sys-/model' mountpoint /media/USB description External Storage sda force_mounted True scanning ('External Storage sda', '/media/USB', <__main__.Session object at 0xb21d7250>) scanner: [<Scanner Movie>, <Scanner Video CD>, <Scanner Music>, <Scanner Audio-CD>, <Scanner Pictures>] [Skin] Processing screen 'MessageBoxSimple', position=(480, 532), size=(960 x 15) for module 'MessageBox'. [Skin] Parsing embedded skin '<embedded-in-SimpleSummary>'. [Skin] Processing screen '<embedded-in-SimpleSummary>' from list 'MessageBoxSimple_summary, SimpleSummary', position=(0, 0), size=(132 x 64) for module 'SimpleSummary'. [Screen] Showing screen '['MessageBoxSimple_summary', 'SimpleSummary']'. [Screen] Showing screen 'MessageBoxSimple'. [Avahi] watch activated: 0x1
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: OpenPLi-py3 #678
Posted 2 November 2022 - 12:43
<Scanner Opkg> is missing...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi-py3 #679
Posted 2 November 2022 - 14:10
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: OpenPLi-py3 #680
Posted 2 November 2022 - 14:20
The software management plugin does:
def filescan(**kwargs): from Components.Scanner import Scanner, ScanPath return \ Scanner(mimetypes=["application/x-debian-package"], paths_to_scan=[ ScanPath(path="ipk", with_subdirs=True), ScanPath(path="", with_subdirs=False), ], name="Opkg", description=_("Install extensions"), openfnc=filescan_open, )
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
11 user(s) are reading this topic
0 members, 11 guests, 0 anonymous users