1139 replies to this topic

[mike-nl]

hallo Tech

yes i mean it will work after i zapped to another channel

[mike-nl]

the same problem even if you restart enigma2 or change from satellite to other satellite , the automatically timeshift doesn't start automatically

just tested openatv 7.2 image ... i didn't face any problem , every thing worked perfect

 

thank you all

[WanWizard]

I can't reproduce it (develop build of the 14th, Mutant HD66 SE, timeshift starts after 5 seconds).

 

Both timeshift on the startup channel as on a channel on a different sat after zapping works fine.

 

What box do you have this issue with? Which develop build? What is your specific timeshift configuration?

[mike-nl]

vuduo4k

openpli-develop 15-01-2023

automatically start timeshift after 2 seconds

timesfift location  /media/usb/timeshift/

[WanWizard]

I can't test with my Duo 4K, but I will with my Solo 4K after dinner.

[WanWizard]

Forgot to report back: also on my Solo 4K, with "start after 2 seconds", no problem with timeshift.

[mike-nl]

timeshift configuration:

automatically start timeshift after 2 seconds

timeshift location  /media/usb/timeshift/

 

I tried the harddisk and 3 different usb stick and it didn't solve the problem

Today i tested openatv and openspa and i did not face any problem

really i dont understand anything

anyway thank you for your help

[WanWizard]

I didn't do anything different.

 

On my HD66SE I used the internal harddisk as timeshift location, on the Solo 4K I used an NFS mount to my NAS (my "production" boxes doen't have local storage).

 

How did you determine it doesn't work? Where the timeshift files not created? Couldn't you step back into your timeshift after you paused after like a minute or so?

[mike-nl]

Suppose you are now watching SBS6 HD channel.. restart enigma2 and wait two minutes, then click on pause , You will find that the timeshift started only after pressing the pause button, although it should have started from two minutes ago

look to image 1

but when i zapp to another channel and wait 2 min  , the timeshift start automatically after 2 seconds after pressing pause button , look to image 2 ... i waited about 4 min then paused ...  the timeshift started 4 min ago

 that means i have problem with the automatically timeshift when i restart enigma2 -full restart- change from sat to other sat , he doesnot start automatically after 2 seconds 

i donot know if i explainedc my problem good or not 

Attached Files

•  timeshift after 2 sec-problem-image1.png   165.2KB   2 downloads
•  timeshift after 2 sec-good-image 2.png   193.73KB   2 downloads

[WanWizard]

As I said, I can not reproduce it.

 

If you look in /media/usb/timeshift/ after a zap, there should be two timeshift files? Are they there?

 

If not, restart the box in debug mode (in the restart menu), zap a few times, give each channel a minute or so, then restart the box again in standard mode.

 

Get the debuglog file from the box (it is in /home/root), and attach it here (use the "More Reply Options" button to do so), so we can see if there are any issues reported.

[WanWizard]

Just tested it again:

root@hd66se:~# ls -l /media/hdd/timeshift/
-rw-------    1 root     root      16556032 Jan 17 17:37 timeshift.FmDMp2
-rw-r--r--    1 root     root         26464 Jan 17 17:37 timeshift.FmDMp2.sc
root@hd66se:~# ls -l /media/hdd/timeshift/
-rw-------    1 root     root      31764480 Jan 17 17:38 timeshift.FmDMp2
-rw-r--r--    1 root     root         48704 Jan 17 17:38 timeshift.FmDMp2.sc
root@hd66se:~# ls -l /media/hdd/timeshift/
-rw-------    1 root     root      38502400 Jan 17 17:38 timeshift.FmDMp2
-rw-r--r--    1 root     root         59808 Jan 17 17:38 timeshift.FmDMp2.sc
root@hd66se:~# uptime
 17:38:30 up 1 min,  load average: 11.75, 4.28, 1.55

file is created and growing, uptime of the box about a minute...
 

[rantanplan]

@ mike-nl
debuglog?

Edited by rantanplan, 17 January 2023 - 19:36.

[mike-nl]

reflashed my box without backup settings .. just for test

here is the debuglog ;

[Avahi] avahi_timeout_new

[Avahi] avahi_watch_new(3 0x1)
[Avahi] avahi_timeout_update
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] client state: 2
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[eInit] + (1) Background File Eraser
[eInit] + (5) Tuxtxt
[eInit] + (8) graphics acceleration manager
[eInit] + (9) Font Render Class
[Font] Initializing lib.
[Font] Loading fonts.
[Font] Intializing font cache, using max. 4MB.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 11
ENIGMA_DEBUG_LVL=4
[eInit] + (9) gLCD
[eFbLCD] /dev/fb1: No such file or directory
[eFbLCD] framebuffer /dev/fb1 not available
[eDboxLCD] xres=480, yres=320, bpp=32 lcd_type=3
[eLCD] (480x320x32) buffer 0xb5973008 614400 bytes, stride 1920
[gLCDDC] resolution: 480x320x32 stride=1920
[eInit] + (9) GFBDC
[fb] /dev/fb0: 21600k video mem
[fb] double buffering available!
[gFBDC] resolution: 1920x1080x32 stride=7680, 5400kB available for acceleration surfaces.
[eInit] + (10) gRC
[gRC] thread created successfully
[eInit] + (15) eWindowStyleManager
[eInit] + (20) AVSwitch Driver
[eInit] + (20) misc options
[eInit] + (20) RC Input layer
[eInit] + (20) UHF Modulator
[eRFmod] couldnt open /dev/rfmod0: No such file or directory
[eInit] + (20) DVB-CI UI
[eInit] + (21) input device driver
[eInputDeviceInit] adding device /dev/input/event0
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol
[eInputDeviceInit] Found 1 input devices.
[eInit] + (22) Hdmi CEC driver
[eInit] + (30) eActionMap
[eInit] + (35) CA handler
[eInit] + (35) CI Slots
[CI] scanning for common interfaces..
[CI] Slot: 0 setSource: A
[CI] Slot: 1 setSource: A
[CI] eDVBCIInterfaces setInputSource(0, A)
[CI] eDVBCIInterfaces setInputSource(1, 
[CI] eDVBCIInterfaces setInputSource(2, C)
[CI] eDVBCIInterfaces setInputSource(3, D)
[CI] eDVBCIInterfaces setInputSource(4, E)
[CI] eDVBCIInterfaces setInputSource(5, F)
[CI] eDVBCIInterfaces setInputSource(6, G)
[CI] eDVBCIInterfaces setInputSource(7, H)
[CI] eDVBCIInterfaces setInputSource(8, I)
[CI] eDVBCIInterfaces setInputSource(9, J)
[CI] eDVBCIInterfaces setInputSource(10, K)
[CI] eDVBCIInterfaces setInputSource(11, L)
[CI] eDVBCIInterfaces setInputSource(12, M)
[CI] eDVBCIInterfaces setInputSource(13, N)
[CI] eDVBCIInterfaces setInputSource(14, O)
[CI] eDVBCIInterfaces setInputSource(15, P)
[CI] eDVBCIInterfaces setInputSource(16, Q)
[CI] eDVBCIInterfaces setInputSource(17, R)
[CI] eDVBCIInterfaces setInputSource(18, S)
[CI] eDVBCIInterfaces setInputSource(19, T)
[CI] done, found 2 common interface slots
[eInit] + (40) eServiceCenter
[eServiceCenter] settings instance.
[eInit] + (41) Stream server
[Avahi] AvahiServiceEntry (null) (_e2stream._tcp) 8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Will Register vuduo4k (_e2stream._tcp) on vuduo4k:8001
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered vuduo4k (_e2stream._tcp) on vuduo4k:8001
[eInit] + (41) Encoders
[eInit] + (41) eServiceFactoryDVB
[eInit] + (41) eServiceFactoryFS
[eInit] + (41) eServiceFactoryM2TS
[eInit] + (41) eServiceFactoryHDMI
[eInit] + (41) eServiceFactoryTS
[eInit] + (41) eServiceFactoryWebTS
[eInit] + (41) eServiceFactoryDVD
[eInit] reached rl 70
[eDVBDB] ---- opening lame channel db
[eDVBDB] reading services (version 4)
[eDVBDB] loaded 95 channels/transponders and 1302 services
eDVBSatelliteEquipmentControl::clear()
[eDVBResourceManager] scanning for frontends..
[eDVBFrontend0] opening frontend
[eDVBFrontend0] opening frontend
[eDVBFrontend0] frontend 0 has DVB API 50a 
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend0] close frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] opening frontend
[eDVBFrontend1] opening frontend
[eDVBFrontend1] frontend 1 has DVB API 50a 
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] close frontend
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend2] opening frontend
[eDVBFrontend2] opening frontend
[eDVBFrontend2] frontend 2 has DVB API 50a 
[eDVBFrontend2] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend2] close frontend
[eDVBFrontend2] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend3] opening frontend
[eDVBFrontend3] opening frontend
[eDVBFrontend3] frontend 3 has DVB API 50a 
[eDVBFrontend3] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend3] close frontend
[eDVBFrontend3] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend4] opening frontend
[eDVBFrontend4] opening frontend
[eDVBFrontend4] frontend 4 has DVB API 50a 
[eDVBFrontend4] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend4] close frontend
[eDVBFrontend4] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend5] opening frontend
[eDVBFrontend5] opening frontend
[eDVBFrontend5] frontend 5 has DVB API 50a 
[eDVBFrontend5] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend5] close frontend
[eDVBFrontend5] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend6] opening frontend
[eDVBFrontend6] opening frontend
[eDVBFrontend6] frontend 6 has DVB API 50a 
[eDVBFrontend6] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend6] close frontend
[eDVBFrontend6] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend7] opening frontend
[eDVBFrontend7] opening frontend
[eDVBFrontend7] frontend 7 has DVB API 50a 
[eDVBFrontend7] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend7] close frontend
[eDVBFrontend7] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBDemux] using 32 for PVR DMX_SET_SOURCE
[eDVBAdapterLinux] get demux 0
[eDVBAdapterLinux] get demux 1
[eDVBAdapterLinux] get demux 2
[eDVBAdapterLinux] get demux 3
[eDVBAdapterLinux] get demux 4
[eDVBAdapterLinux] get demux 5
[eDVBAdapterLinux] get demux 6
[eDVBAdapterLinux] get demux 7
[eDVBAdapterLinux] get demux 8
[eDVBAdapterLinux] get demux 9
[eDVBAdapterLinux] get demux 10
[eDVBAdapterLinux] get demux 11
[eDVBAdapterLinux] get demux 12
[eDVBAdapterLinux] get demux 13
[eDVBAdapterLinux] get demux 14
[eDVBAdapterLinux] get demux 15
[eDVBAdapterLinux] get demux 16
[eDVBAdapterLinux] get demux 17
[eDVBAdapterLinux] get demux 18
[eDVBAdapterLinux] get demux 19
[eDVBAdapterLinux] get demux 20
[eDVBResourceManager] found 1 adapter, 8 frontends(8 sim) and 21 demux
[eDVBLocalTimeHandler] Use valid Linux Time  (RTC?)
[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
[eEPGTransponderDataReader] Initialized
[MAIN] Loading spinners...
[MAIN] found 7 spinner!
[setIoPrio] best-effort level 3 ok
[HardwareInfo] Scanning hardware info
Detected: vuduo4k (1500A0)
[CamControl] No softcam link? /etc/init.d/softcam
[Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or directory
[Console] command: mount /dev/mmcblk0p1 /tmp/Multibootrbcnmez5
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/Multibootrbcnmez5
[eConsoleAppContainer] Starting /bin/sh
[Console] command: mount /dev/mmcblk0p3 /tmp/Multibootrbcnmez5
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/Multibootrbcnmez5
[eConsoleAppContainer] Starting /bin/sh
[Console] command: mount /dev/mmcblk0p4 /tmp/Multibootrbcnmez5
[eConsoleAppContainer] Starting /bin/sh
[Console] command: umount /tmp/Multibootrbcnmez5
[eConsoleAppContainer] Starting /bin/sh
[Multiboot] Bootslots found: {}
[Harddisk] enumerating block devices...
[Harddisk] new device=sda dev_path=/dev/sda disk_path=/dev/sda removable=False internal=True rotational=1 card=False
[Console] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
[eConsoleAppContainer] Starting hdparm
[Harddisk] new device=sdb dev_path=/dev/sdb disk_path=/dev/sdb removable=True internal=False rotational=1 card=False
[Keyboard] Adding keymap 'Dreambox Keyboard Deutsch' ('dream-de.kmap').
[Keyboard] Adding keymap 'azerty keyboard' ('azerty.kmap').
[Keyboard] Adding keymap 'Default (US)' ('default.kmap').
[Keyboard] Adding keymap 'Dreambox Keyboard English' ('eng.kmap').
[Keyboard] Adding keymap 'German keyboard' ('de.kmap').
Activating language English
[Keyboard] Activating keymap: 'Default (US)'.
[Console] command: loadkmap < /usr/share/keymaps/default.kmap
[eConsoleAppContainer] Starting /bin/sh
[Geolocation] Warning: Geolocation has been disabled by user configuration!
[NimManager] Reading satellites.xml
eDVBSatelliteEquipmentControl::clear()
[SecConfigure] sec config cleared
[eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 2 to slotid 2, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled No, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 3 to slotid 3, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled No, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 4 to slotid 4, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled No, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 5 to slotid 5, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled No, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 6 to slotid 6, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled No, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 7 to slotid 7, descr Vuplus DVB-S NIM(45308X FBC), need rotorworkaround No, enabled No, DVB-S2 Yes
[SecConfigure] link tuner 1 to tuner 0
[eDVBSatelliteEquipmentControl::setTunerLinked] tu=1, 0
[SecConfigure] slot: 0 configmode: advanced
[eDVBSatelliteEquipmentControl::setSlotNotLinked] slot=0
[SecConfigure] add 192 to 1
[eDVBSatelliteEquipmentControl::addLNB] lnb=0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=3
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=4
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setLatitude] lattitude=50.766998
[eDVBSatelliteEquipmentControl::setLongitude] longitude=5.100000
[eDVBSatelliteEquipmentControl::setLaDirection] direction=0
[eDVBSatelliteEquipmentControl::setLoDirection] direction=2
[eDVBSatelliteEquipmentControl::setUseInputpower] onoff=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=3
[eDVBSatelliteEquipmentControl::setLNBPrio] prio=-1
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=192
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setRotorPosNum] posnum=3
[SecConfigure] slot: 1 configmode: loopthrough
[SecConfigure] slot: 2 configmode: nothing
[SecConfigure] slot: 3 configmode: nothing
[SecConfigure] slot: 4 configmode: nothing
[SecConfigure] slot: 5 configmode: nothing
[SecConfigure] slot: 6 configmode: nothing
[SecConfigure] slot: 7 configmode: nothing
[SecConfigure] sec config completed
[Picon] adding path: /media/usb/picon/
[ML] BlurayPlayer not installed: cannot import name 'BlurayPlayer' from 'Plugins.Extensions' (/usr/lib/enigma2/python/Plugins/Extensions/__init__.pyc)
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
[eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
[eDVBDB] 1302 entries in Bouquet userbouquet.LastScanned.tv
[eDVBDB] 2 entries in Bouquet bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
[eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
[eDVBDB] 1 entries in Bouquet bouquets.radio
[eDVBDB] Renumbering...
[Skin] Loading skin file '/usr/share/enigma2/skin_default/skin.xml'.
[fb] double buffering available!
[gFBDC] resolution: 720x576x32 stride=7680, 12960kB available for acceleration surfaces.
[Font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'Regular'.
[Font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[Font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[Font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[Font] Adding font '/usr/share/fonts/ae_AlMateen.ttf' -> 'Replacement'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/skin_default/skin.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/skin_subtitles.xml'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Subs'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Italic.ttf' -> 'Subsi'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Bold.ttf' -> 'Subsb'.
[Font] Adding font '/usr/share/fonts/LiberationSans-BoldItalic.ttf' -> 'Subsz'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/skin_subtitles.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/display/skin_default/skin_display.xml'.
[Font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'FdLcD'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/display/skin_default/skin_display.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin.xml'.
[fb] double buffering available!
[gFBDC] resolution: 1920x1080x32 stride=7680, 5400kB available for acceleration surfaces.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_templates.xml'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_templates.xml' complete.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin_plugins.xml' complete.
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Regular'.
[Font] Adding font '/usr/share/fonts/lcd.ttf' -> 'LCD'.
[Font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[Font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[Font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Skin] Loading skin file '/usr/share/enigma2/PLi-FullNightHD/skin.xml' complete.
[Skin] Loading skin file 'skin_user.xml'.
[Skin] Warning: Skin file 'skin_user.xml' does not exist!
[InputDevice] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[InputDevice] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[eAVSwitch] cannot open /proc/stb/avs/0/input_choices: No such file or directory
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[eTuxttxtApp] enable caching
[eDVBLocalTimeHandler] disable sync local time with transponder time!
[eEPGCache] time updated.. but cache file not set yet.. dont start epg!!
[Timezones] Note: Classic time zones in '/etc/timezone.xml' are not available.
[Timezones] Setting time zone to 'Europe/Amsterdam'.
[Timezones] Local time is 'Tue 17-Jan-2023 20:35:35'  -  UTC time is 'Tue 17-Jan-2023 19:35:35'.
[keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
static nameservers: []
dhcp nameservers: [[213, 46, 228, 196], [62, 179, 104, 196]]
read configured interface: {'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'up': True, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameserver': [], 'ip': [192, 168, 178, 101], 'netmask': [255, 255, 255, 0], 'bcast': [192, 168, 178, 255], 'mac': '00:1d:ec:13:d1:cc', 'gateway': [192, 168, 178, 1]}}
static nameservers: []
dhcp nameservers: [[213, 46, 228, 196], [62, 179, 104, 196]]
read configured interface: {}
self.ifaces after loading: {'eth0': {'up': True, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameserver': [], 'ip': [192, 168, 178, 101], 'netmask': [255, 255, 255, 0], 'bcast': [192, 168, 178, 255], 'mac': '00:1d:ec:13:d1:cc', 'gateway': [192, 168, 178, 1]}, 'wlan3': {'up': False, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameserver': [], 'ip': [0, 0, 0, 0], 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
[waitForNetwork] Online, reload interface data
static nameservers: []
dhcp nameservers: [[213, 46, 228, 196], [62, 179, 104, 196]]
read configured interface: {'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'up': True, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameserver': [], 'ip': [192, 168, 178, 101], 'netmask': [255, 255, 255, 0], 'bcast': [192, 168, 178, 255], 'mac': '00:1d:ec:13:d1:cc', 'gateway': [192, 168, 178, 1]}, 'wlan3': {'up': False, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameserver': [], 'ip': [0, 0, 0, 0], 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
static nameservers: []
dhcp nameservers: [[213, 46, 228, 196], [62, 179, 104, 196]]
read configured interface: {}
self.ifaces after loading: {'eth0': {'up': True, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameserver': [], 'ip': [192, 168, 178, 101], 'netmask': [255, 255, 255, 0], 'bcast': [192, 168, 178, 255], 'mac': '00:1d:ec:13:d1:cc', 'gateway': [192, 168, 178, 1]}, 'wlan3': {'up': False, 'dhcp': True, 'preup': False, 'predown': False, 'dns-nameserver': [], 'ip': [0, 0, 0, 0], 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
[eDboxLCD] setLCDBrightness 25
[eDboxLCD] setLCDBrightness 127
[CI] Slot: 0 Enabled: 1, state 2
[CI] Slot: 1 Enabled: 1, state 2
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
[setVoiceCheckDB] value : -33
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[VideoHardware] reading preferred modes override, using all video modes
[VideoHardware] getModeList for port DVI-PC
[VideoHardware] remove DVI-PC because of not existing modes
[VideoHardware] getModeList for port DVI
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
[VideoHardware] setMode - port: DVI mode: 1080i rate: 50Hz
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 bestfit bestfit auto
<RemoteControlCode> Write Remote Control Code : 2
[AutoBackup] fallback to default translation for Automatic settings backup
Plugin  Extensions/WebInterface failed to load: No module named 'Plugins.Extensions.WebInterface.plugin'
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[MovieCut] set language to  en
[MovieCut] set language to  en
[MovieCut] fallback to default Enigma2 Translation for Execute cuts...
[gRC] main thread is non-idle! display spinner!
Current Picon Path : /media/usb/picon/
[OpenWebif] -D- tuner '0' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner A'
[OpenWebif] -D- tuner '1' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner B'
[OpenWebif] -D- tuner '2' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner C'
[OpenWebif] -D- tuner '3' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner D'
[OpenWebif] -D- tuner '4' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner E'
[OpenWebif] -D- tuner '5' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner F'
[OpenWebif] -D- tuner '6' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner G'
[OpenWebif] -D- tuner '7' 'Vuplus DVB-S NIM(45308X FBC)' 'Tuner H'
Getting attribute  mac  for adapter eth0
Getting attribute  dhcp  for adapter eth0
Getting attribute  ip  for adapter eth0
Getting attribute  netmask  for adapter eth0
Getting attribute  netmask  for adapter eth0
Getting attribute  gateway  for adapter eth0
[TIMER] record time changed, start prepare is now: Thu Jan  1 00:59:40 1970
[eInit] + (41) eServiceFactoryMP3
[Skin] No skin to read or screen to display.
[Skin] Processing screen '<embedded-in-auto3D>', position=(0, 0), size=(0 x 0) for module 'auto3D'.
[Skin] Processing screen 'SimpleSummary' from list 'auto3D_summary, SimpleSummary', position=(0, 0), size=(480 x 320) for module 'SimpleSummary'.
[Screen] Showing screen '['auto3D_summary', 'SimpleSummary']'.
[Screen] Showing screen 'auto3D'.
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[Avahi] AvahiServiceEntry (null) (_http._tcp) 80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Will Register vuduo4k (_http._tcp) on vuduo4k:80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered vuduo4k (_http._tcp) on vuduo4k:80
[eEPGCache] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[Skin] Parsing embedded skin '<embedded-in-Screensaver>'.
[Skin] Processing screen '<embedded-in-Screensaver>', position=(0, 0), size=(1920 x 1080) for module 'Screensaver'.
[Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1920 x 1080) for module 'SecondInfoBar'.
[Screen] Showing screen 'SecondInfoBar'.
[Skin] Processing screen 'SecondInfoBarSimple', position=(0, 0), size=(1920 x 1080) for module 'SecondInfoBar'.
[Screen] Showing screen 'SecondInfoBarSimple'.
[Skin] Parsing embedded skin '<embedded-in-HideVBILine>'.
[Skin] Processing screen '<embedded-in-HideVBILine>', position=(0, 0), size=(1920 x 7) for module 'HideVBILine'.
[Screen] Showing screen 'HideVBILine'.
[Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1920 x 1080) for module 'ChannelSelection'.
[ActionMap] Keymap(s) 'InfobarEPGActions' -> Undefined action(s) 'showEventInfoMultiEPG, showInfobarOrEpgWhenInfobarAlreadyVisible'.
[Skin] Processing screen 'RdsInfoDisplay', position=(22, 90), size=(1920 x 300) for module 'RdsInfoDisplay'.
[Skin] No skin to read or screen to display.
[Skin] Processing screen '<embedded-in-RdsInfoDisplaySummary>', position=(0, 0), size=(0 x 0) for module 'RdsInfoDisplaySummary'.
[Screen] Showing screen 'RdsInfoDisplaySummary'.
[Skin] Processing screen 'UnhandledKey', position=(1856, 10), size=(34 x 45) for module 'UnhandledKey'.
[Skin] Processing screen 'VideoMode', position=(127, 67), size=(600 x 75) for module 'VideoMode'.
[Skin] Processing screen 'Dish', position=(30, 90), size=(195 x 303) for module 'Dish'.
[Skin] Processing screen 'BufferIndicator', position=(660, 45), size=(600 x 48) for module 'BufferIndicator'.
[HelpActionMap] removed duplicity: InfobarTimeshiftActions ('seekFwdManual', 'Seek forward (enter time)')
[HelpActionMap] removed duplicity: InfobarTimeshiftActions ('seekBackManual', 'Seek backward (enter time)')
[HelpActionMap] removed duplicity: InfobarSeekActions ('jumpPreviousMark', 'Jump to previous marked position')
[HelpActionMap] removed duplicity: InfobarSeekActions ('jumpNextMark', 'Jump to next marked position')
[Skin] Processing screen 'TimeshiftState', position=(150, 67), size=(1620 x 150) for module 'TimeshiftState'.
[Skin] Processing screen 'TimeshiftLive', position=(105, 105), size=(450 x 45) for module 'TimeshiftLive'.
[Skin] Processing screen 'SubtitleDisplay', position=(0, 0), size=(1920 x 1080) for module 'SubtitleDisplay'.
RemovePopup, id = ZapError
[Skin] Processing screen 'InfoBar', position=(0, 0), size=(1920 x 1080) for module 'InfoBar'.
[Screen] Showing screen 'RdsInfoDisplay'.
[Skin] Processing screen 'InfoBarSummary', position=(0, 0), size=(480 x 320) for module 'InfoBarSummary'.
[Skin] Attribute 'halign' (with value of 'center') in object of type 'ePixmap' is not implemented!
[Skin] Attribute 'valign' (with value of 'center') in object of type 'ePixmap' is not implemented!
[Skin] Attribute 'foregroundColor' (with value of '#ff0000') in object of type 'ePixmap' is not implemented!
[Skin] Attribute 'foregroundColor' (with value of '#ff0000') in object of type 'ePixmap' is not implemented!
[Screen] Showing screen 'InfoBarSummary'.
[Screen] Showing screen 'TimeshiftState'.
[Screen] Showing screen 'InfoBar'.
[Skin] Processing screen 'Volume', position=(0, 360), size=(30 x 330) for module 'Volume'.
[Screen] Warning: Skin is missing element 'VolumeText' in <class 'Screens.Volume.Volume'>.
[Skin] Processing screen 'Mute', position=(937, 15), size=(45 x 45) for module 'Mute'.
[Volume] Volume set to 50.
[eDVBVolumecontrol] Setvolume: raw: 50 50, -1db: 32 32
[Skin] Processing screen 'Scart', position=(0, 0), size=(1920 x 1080) for module 'Scart'.
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Navigation] playing:  1:0:19:283D:3FB:1:C00000:0:0:0:
[gRC] main thread is non-idle! display spinner!
[eEPGCache] 789639 events read from /media/hdd/epg.dat
[Screen] Showing screen 'InfoBar'.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 03fb:0001
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10005
[eDVBSatelliteEquipmentControl] direct_connected 0
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10000
[eDVBFrontend0] opening frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eEPGTransponderDataReader] start Mainloop
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 192 found
[eDVBSatelliteEquipmentControl] ret0 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10005
[eDVBSatelliteEquipmentControl] RotorCmd 03, lastRotorCmd ffffffff
[eDVBSatelliteEquipmentControl] set rotor timeout to 360 seconds
[eDVBFrontend0] prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1743 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Avahi] watch activated: 0x1
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set static current limiting
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set sequence pos 3
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo4k' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] sleep 900ms
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo4k' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo4k' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] Resolving service 'vuduo4k' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] set sequence pos 9
[eDVBFrontend0] invalidate current rotorparams
[eDVBFrontend0] sendDiseqc: e0316b03(?)
[Screen] Showing screen 'Dish'.
[eDVBFrontend0] sleep 1000ms
enable timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] Start timeshift!
timeshift failed
[eDVBFrontend0] sleep 2000ms
Getting attribute  ip  for adapter eth0
Getting attribute  netmask  for adapter eth0
[eDVBFrontend0] setVoltage 2
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 1
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set timeout 1440
[eDVBFrontend0] setFrontend 0
[eDVBFrontend0] setting frontend
[eDVBFrontend0] sleep 250ms
[eDVBFrontend0] locked step 0 ok
[eDVBFrontend0] set sequence pos -4
[eDVBFrontend0] sleep 250ms
[eDVBFrontend0] locked step 1 ok
[eDVBFrontend0] set sequence pos -4
[eDVBFrontend0] sleep 250ms
[eDVBFrontend0] locked step 2 ok
[eDVBFrontend0] set sequence pos -4
[eDVBFrontend0] sleep 250ms
[eDVBFrontend0] locked step 3 ok
[eDVBFrontend0] set sequence pos -4
[eDVBFrontend0] sleep 250ms
[eDVBFrontend0] locked step 4 ok
[eDVBFrontend0] ok > 4 .. goto 4


[eDVBFrontend0] set sequence pos 4
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x9041a0 running
[eEPGTransponderDataReader] channel 0x9041a0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eEPGChannelData] next update in 2 sec
[eDVBServicePlay] have 1 video stream(s) (13ed), and 1 audio stream(s) (13f2), and the pcr pid is 13ed, and the text pid is 13f0
[eDVBChannel] getDemux cap=01
[eTSMPEGDecoder] decoder state: play, vpid=13ed, apid=13f2
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x13ed ok
[eDVBPCR0] DEMUX_START ok
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x13f2 ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=0 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x13ed ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBText0] DMX_SET_PES_FILTER pid=0x13f0 ok
[eDVBText0] DEMUX_START ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=13f0
[eDVBPESReader] DMX_SET_PES_FILTER pid=13f0
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
[eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1920x1080 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
[eDVBFrontend0] update current rotorparams 1435 0003 192
[eDVBFrontend0] set sequence pos 4
[eDVBFrontend0] update current switch params
[eDVBFrontend0] sleep 500ms
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 13ec for service_id 283d
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=1170
[eDVBServicePlay] have 1 video stream(s) (13ed), and 4 audio stream(s) (13ee, 13ef, 13f3, 13f2), and the pcr pid is 13ed, and the text pid is 13f0
[eTSMPEGDecoder] decoder state: play, vpid=13ed, apid=13f2
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=1170
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5100
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5110
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5120
[Dish] tuned, closing...
[eDVBFrontend0] set dynamic current limiting
[eDVBServicePMTHandler] sdt update done!
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1280x720 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 50000 fps
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 1
[eDVBServicePMTHandler] AITready
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5172
[eDVBServicePMTHandler] AIT: HBBTV-Start-DSMCC+Web
[eDVBServicePMTHandler] AIT: EPG
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5172
[eDVBServicePMTHandler] AIT: VTX-Mandant-ARD-Text-Web+DSMCC
[eDVBServicePMTHandler] AIT: Tagesschau
[eDVBServicePMTHandler] AIT: Mediathek DasErste
[eDVBServicePMTHandler] AIT: HBBTV ARD-Mediathek
[eDVBServicePMTHandler] AIT: Sportschau
[eDVBServicePMTHandler] AIT: Replay
[eDVBServicePMTHandler] AIT: Replay Test
[eDVBServicePMTHandler] AIT: KiKA-Player ARD
[eDVBServicePMTHandler] AIT: Teaser Test App
[eDVBServicePMTHandler] AIT: ARD Audiothek
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eEPGChannelData] start reading events(1673984147)
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[eDVBServicePMTHandler] OCready
[eEPGChannelData] abort non avail schedule other reading
[eEPGChannelData] abort non avail netmed schedule reading
[eEPGChannelData] abort non avail netmed schedule other reading
[eEPGChannelData] abort non avail FreeSat schedule_other reading
[eEPGChannelData] abort non avail viasat reading
[eEPGChannelData] nownext finished(1673984154)
Getting attribute  ip  for adapter eth0
Getting attribute  netmask  for adapter eth0
Getting attribute  ip  for adapter eth0
Getting attribute  netmask  for adapter eth0
Getting attribute  ip  for adapter eth0
Getting attribute  netmask  for adapter eth0
[eEPGChannelData] schedule finished(1673984199)
[eEPGChannelData] stop caching events(1673984199)
[eEPGChannelData] next update in 60 min
Getting attribute  ip  for adapter eth0
Getting attribute  netmask  for adapter eth0
Getting attribute  ip  for adapter eth0
Getting attribute  netmask  for adapter eth0

 

[WanWizard]

[eDVBFrontend0] sleep 1000ms
enable timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] Start timeshift!
timeshift failed
[eDVBFrontend0] sleep 2000ms

To know the exact cause, we need to know the return value of https://github.com/O...ft failed#L1964.

[mike-nl]

something to do with timeshift configuration ? or something wrong with openpli image

as i said before ... i dont have any problem with openatv-openspa images

What do you suggest ?

 

thank you alot

[rantanplan]

[eEPGCache] 789639 events read from /media/hdd/epg.dat

just a try
mhh...
cleanup this file and Test again

Edited by rantanplan, 17 January 2023 - 21:28.

[mike-nl]

rantanplan

i did , still the same problem

[Dimitrij]

https://github.com/O...nerics.py#L1988

RESULT eDVBServicePlay::startTimeshift()
{
	ePtr<iDVBDemux> demux;

	eDebug("[eDVBServicePlay] Start timeshift!");

	if (m_timeshift_enabled)
		return -1;

		/* start recording with the data demux. */
	if (m_service_handler.getDataDemux(demux))
		return -2;

	demux->createTSRecorder(m_record);
	if (!m_record)
		return -3;

	std::string tspath = eConfigManager::getConfigValue("config.usage.timeshift_path");
	if (tspath == "")
	{
		eDebug("[eDVBServicePlay] could not query timeshift path");
		return -5;
	}
	if (tspath.empty())
	{
		eDebug("[eDVBServicePlay] timeshift path is empty");
		return -5;
	}
	if (tspath[tspath.length()-1] != '/')
		tspath.append("/");
	tspath.append("timeshift.XXXXXX");
	char* templ = new char[tspath.length() + 1];
	strcpy(templ, tspath.c_str());
	m_timeshift_fd = mkstemp(templ);
	m_timeshift_file = std::string(templ);
	eDebug("[eDVBServicePlay] timeshift recording to %s", templ);
	delete [] templ;

	if (m_timeshift_fd < 0)
	{
		m_record = 0;
		return -4;
	}

	m_record->setTargetFD(m_timeshift_fd);
	m_record->setTargetFilename(m_timeshift_file);
	m_record->enableAccessPoints(false); // no need for AP information during shift
	m_timeshift_enabled = 1;

	updateTimeshiftPids();
	m_record->start();

	return 0;
}

 

[Huevos]

Does the device you are trying to timeshift to allow hardlinks? This is absolutely required.

[mike-nl]

hallo demitrij

Is the solution in these lines and what should i do ?

something wrong with InfoBarGenerics.py ?