Posted 22 May 2022 - 13:47
Hello,
currently running 8.1 and went to the GUI to check for update ; the system says 570 (or so) packages to update with a recommendation to flash !
My question is : is it better to flash 8.2 with USB stick OR online update will do it correctly anyway ?
Thanks,
GS
VU+ DUO-4K-SE with 1 DBV-C and 1TB Hitachi HDD, OpenPLi 8.3
Posted 22 May 2022 - 14:17
Posted 22 May 2022 - 14:25
Online should work, it just takes some time.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 23 May 2022 - 16:56
Online should work, it just takes some time.
Yes, i see this take a lot more time, I'm in the upgrade process right now and believe me it takes more, more time, but it works, so don't panic.
Vu+ DUO 2 PLI Nightly Build with Wave Frontier T55, 4 twin LNB 19.2E, 13.0E, 4.8E and 0.8W
Posted 23 May 2022 - 18:58
Last Sunday our new Release 8.2 finally came online.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 23 May 2022 - 19:15
5 minutes to flash with backup. Everything works flawlessly. I'm really grateful :-)
Posted 24 May 2022 - 14:37
Attention: The introduction of FCC (Fast Channel Changing) for VU+ has broken transcoding on all boxes that don't use the streamproxy (i.e. everyone except VU+). It is being looked at.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 May 2022 - 05:59
Octagon 8008 still have old drivers
DM-900 ,DM-520, Vu+Duo2
Posted 25 May 2022 - 06:27
Online should work, it just takes some time.
Thank you.
Did the online upgrade this morning on my Vuduo4kse, it took about 5 min. 
Everything went OK (just little struggle with my personal keymap.xml file that I had to recopy).
Many thanks and congrats to the team for their efforts, and for the very good job.
GS
Edited by gspock, 25 May 2022 - 06:27.
VU+ DUO-4K-SE with 1 DBV-C and 1TB Hitachi HDD, OpenPLi 8.3
Posted 25 May 2022 - 07:14
Octagon 8008 still have old drivers
If that is actually a fact then the Octagon developers that maintain the BSP should be kicked.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 25 May 2022 - 08:52
Hi.
Upgrade to 8.2 tomorrow evening and all seems to be ok.
Congrat' !
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 25 May 2022 - 16:23
My update didnt went well. I get this error now when I input opkg update or upgrade
free(): double free detected in tcache 2
Any clue how to fix this (except new flash)?
Posted 25 May 2022 - 16:55
That's a long standing bug in opkg, no idea where it comes from. There are some fixes in Hardknott which is the OE basis for OpenPLi 9.
You keep getting this error, even if you try again?
I can see if I can backport those fixes, but no promisses....
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 May 2022 - 17:58
Yes, keep getting. I assume update even via GUI isnt possible now?
Posted 25 May 2022 - 20:07
Uses the same mechanism.
If you don't have anything installed manually (from ipk files), you can use the flash option from the menu, and select to make a backup before flashing. That will restore all installed plugins and your configuration.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 May 2022 - 21:57
I can see if I can backport those fixes, but no promisses....
Whe fixes I was thinking of are already backported, so your issue comes from elsewhere.
No more information from the error?
edit: can you run a "opkg upgrade -V3" and see it that gives you a more detailed error message?
Edited by WanWizard, 25 May 2022 - 22:40.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 25 May 2022 - 22:03
Updated both boxes online, no issues 
Mutant HD51 OpenPli 9.0 Wohnzimmer
Edision Osmini OpenPli 9.0 Schlafzimmer
Bier lecker 20.0 Kühlschrank 
Posted 26 May 2022 - 17:12
opkg_conf_parse_file: Loading conf file /etc/opkg/3rd-party-armv7ahf-neon-feed.conf.
opkg_conf_parse_file: Loading conf file /etc/opkg/3rd-party-feed.conf.
opkg_conf_parse_file: Loading conf file /etc/opkg/3rd-party-vuduo4k-feed.conf.
opkg_conf_parse_file: Loading conf file /etc/opkg/all-feed.conf.
opkg_conf_parse_file: Loading conf file /etc/opkg/arch.conf.
opkg_conf_parse_file: Supported arch all priority (1)
opkg_conf_parse_file: Supported arch any priority (6)
opkg_conf_parse_file: Supported arch noarch priority (11)
opkg_conf_parse_file: Supported arch armv5hf-vfp priority (16)
opkg_conf_parse_file: Supported arch armv5ehf-vfp priority (21)
opkg_conf_parse_file: Supported arch armv6hf-vfp priority (26)
opkg_conf_parse_file: Supported arch armv7ahf-vfp priority (31)
opkg_conf_parse_file: Supported arch armv7ahf-neon priority (36)
opkg_conf_parse_file: Supported arch vuduo4k priority (41)
opkg_conf_parse_file: Loading conf file /etc/opkg/armv7ahf-neon-feed.conf.
opkg_conf_parse_file: Loading conf file /etc/opkg/opkg.conf.
opkg_conf_parse_file: Loading conf file /etc/opkg/picons-feed.conf.
opkg_conf_parse_file: Loading conf file /etc/opkg/vuduo4k-feed.conf.
free(): double free detected in tcache 2
Aborted
Posted 26 May 2022 - 17:13
Ok, thanks, I'll try to find time to dive into this.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 May 2022 - 21:00
@Taykun345,
On which box do you have this problem?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 2 guests, 0 anonymous users
