210 replies to this topic

[WanWizard]

only import

 

Odd, because the patch fails at line 344.
 

[Dimitrij]

 

Odd, because the patch fails at line 344.

I cannot understand the reason for this.

[dreamce]

You removed the software management...Do something so that we can load the ipk files on the external usb stick...

[WanWizard]

You can install it again if you need to.

[zebulon7]

 

Using wifi?

 

No network issues here, and over wifi I only get a spinner if I open a NAS directory with many hunderds of files.

 

And if it doesn't record the view progress, the box doesn't have write or create access on the NAS.

Yes, the Duo4K is connected in wifi to my Orange box that communicates with my NAS by CPL

When I access the NAS through the mediaplayer, it’s quite long whether there are many files or not

 

For exemple : Duo4 WIFI Box Orange CPL NAS -> Folder VIDEO contains 6 folders -> Folder 1 contains 20 folders -> Folder 15 contains 10 folders and 13 files -> Folder 6 contains 97 files

 

when I looked at a file among the 97, it is only rarely mark as seen with a full gauge in the mediaplayer

 

Again, I haven’t changed my installation and that makes it that since some few updates, but I don’t remember if it started with the 8.3 or the 8.2.

 

 

 

Not sure what you mean by mediaplayer, but when you open a folder in the movielist (under the PVR or Playlist button) all files are read to determine type and length, and to load information and progress information.

 

If you have a network connection with high latency like wifi, this may take a while. Using CIFS / SMB to connect to the NAS instead of NFS may make things worse.

 

Like I wrote, the box needs write access to the NAS folder, so make sure the share is mounted read/write, and the user used to make the mount has create and write access on the NAS.

 

Also, the progress marker is only written when you properly stop watching a recording, using the stop button on the remote.

 

 

 

Not sure what you mean by mediaplayer, but when you open a folder in the movielist (under the PVR or Playlist button) all files are read to determine type and length, and to load information and progress information.

 

If you have a network connection with high latency like wifi, this may take a while. Using CIFS / SMB to connect to the NAS instead of NFS may make things worse.

 

Like I wrote, the box needs write access to the NAS folder, so make sure the share is mounted read/write, and the user used to make the mount has create and write access on the NAS.

 

Also, the progress marker is only written when you properly stop watching a recording, using the stop button on the remote.

I always use the stop button.
the user has all the permissions and the shared directory is well mounted in read / write (In fact, sometimes the gauge updates well and sometimes not)

mediaplayer is the standard player to play all files

 

 

 

I asked because the PVR / Playlist button opens the movie list, but there is also a Mediaplayer plugin which you shouldn't use for normal recordings.

 

Here the mediaplayer plugin is even faster when loading the file list, as it doesn't calculate recording duration.

 

I've just timed it. My "Movies" folder has 758 recorded movies, which takes 11 seconds to open over wifi and an NFS mount to my NAS.

 

 

So, you tell me to use which mediaplayer ?

 

 

Entirely up to you, in the end they both play media. I personally never use the plugin, mainly because I can access the movielist with a single press of the remote.

 

Hi everybody

 

For the information of all, following my problems, I went back from wifi 5 to wifi 2.4 and more worries.So we can conclude that it is wifi 5 that causes these worries.

[rizwanawan]

I flash 8.3 on my Octagon sf8008 on slot, where already was Openpli 8.2, Now , there is no more Dreamexplorer in feeds. Ater flashing, whenever I update software, there is still more than 100 updates available, doing again and again, but many available update showing, Also reflash but still same issue

[Aliraza63]

I flash 8.3 on my Octagon sf8008 on slot, where already was Openpli 8.2, Now , there is no more Dreamexplorer in feeds. Ater flashing, whenever I update software, there is still more than 100 updates available, doing again and again, but many available update showing, Also reflash but still same issue

Avoid using previous image's backup files . 

If flash (1st image in slot 1)  image is py 3 .

Edited by Aliraza63, 13 October 2022 - 11:21.

[WanWizard]

I have just flashed my SF8008 with OpenPLi 8.3 (the last one, from the 9th), including backup/restore.

 

There are 43 packages to update, which are picons and some shared packages, nothing special or relevant.

 

And DreamExplorer is there:

 

Attached Files

•  1_0_19_22C5_80D_2_11A0000_0_0_0_20221013132831.jpg   136.69KB   6 downloads

[zibiiii]

Hi.

I have ZGMMA H9 Twin, I have DVB-T as DVB-USB-DIB0700 Dongle, after installing the DVB-USB-DIB0700 controller. After deep sleep and restart, DVB-S tuners and like DVB-USB-DIB0700 tuner do not work.

After the restart, DVB-S works work again but the lack of DVB-T does not detect DVB-USB-DIB0700 as a tuner.

 

There is no problem on OpenPli 7.3

How to fix it in OpenPli 8.3.

Thank you

I will ask again.

I am asking for info, is there a rope for support or a closed topic?

Regards.

[Dimitrij]

zibiiii

OpenPli 7.3 use mdev for mount

OpenPli 8.x use udev for mount

[zibiiii]

zibiiii

OpenPli 7.3 use mdev for mount

OpenPli 8.x use udev for mount

 

How to start at 8.3?

[balkanac]

Look at my log, please.

My box is Zgemma H7 with OpenPli 8.3 in multiboot.

Why is this happening?

I installed an Epgimporter.

After the enigma restart, the screen is green.The box constantly rests itself.Also, the channel list is gone, I have no names of channels, only DVB Service.

I wiped Plugincomponent.Py at the location:

 

"/usr/lib/enigma2/python/components/plugincomponent.py"

 

After that, the box was starting properly.I then uninstall Epgimporter and returned back to File plugincomponent.Py

It seems that everything is ok now, but occasionally the name of the channel disappears again, that is, the channel list stands only n/a.

 

Attached Files

•  enigma2_crash_OpenPLi8.3_Zgemma_H7s.txt   750bytes   5 downloads

Edited by balkanac, 19 October 2022 - 22:02.

[WanWizard]

Not very handy, plugincomponent in integral part of Enigma.

 

It crashes because you have some plugin installed that is broken, corrupt, or otherwise not compatible.

[mahdi-dz]

Hello ,

I would like to know why openpli 8.3 does not have GStreamer ?

 on my MAXYTEC multibox

Thank you

[WanWizard]

Because the Hisilicon chipset doesn't use it, it uses a hardware accelerated version of ffmpeg.

[wawa16]

Hi everybody

 

crash with blind scan  last update openpli 8.3 vu+ zero 4k

OpenPLi Enigma2 crash log

crashdate=Fri Oct 21 15:51:11 2022
compiledate=Sep 18 2022
skin=PLi-FullNightHD/skin.xml
sourcedate=2022-09-06
branch=release-8.3
rev=fea507c
component=Enigma2

stbmodel=zero4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p7 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
nimsockets=NIM Socket 0:
imageissue=openpli 8.3-release %h


REMOVE Peer vuzero4k
REMOVE Peer vuzero4k
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 77, in action
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 62, in okbuttonClick
  File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 10, in __call__
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Blindscan/plugin.py", line 1819, in BlindscanMain
  File "/usr/lib/enigma2/python/StartEnigma.py", line 302, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/StartEnigma.py", line 312, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/StartEnigma.py", line 255, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/StartEnigma.py", line 272, in doInstantiateDialog
    dlg = screen(self, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Blindscan/plugin.py", line 319, in __init__
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Blindscan/plugin.py", line 642, in createConfig
AttributeError: 'Blindscan' object has no attribute 'getCurrentTuner'
[ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0xb086ad78>>,('OkCancelActions', 'ok')) failed)


dmesg

<4>[  225.735715] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[  225.739974] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[  225.744529] [VID]: VIDEO_PLAY 1  5 0
<4>[  225.753580] [VID]: VIDEO_CONTINUE 1  1 
<4>[  225.759247] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[  225.924384] [VID]: VIDEO_STOP 0  1
<4>[  225.928744] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[  229.415348] [AUD]: AUDIO_SET_MUTE 0 
<4>[  229.419946] [AUD]: AUDIO_SET_MIXER -876953968 
<4>[  229.424422] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[  229.429501] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355
<4>[  229.437029] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  232.803628] [AUD]: AUDIO_SET_MIXER -876953968 
<4>[  232.808098] [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32
<4>[  232.813354] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  232.820330] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355

 

 

[ghuss]

VU+ Duo 2 Skin pd1loi-hd-night (2.6.1+git450)

OpenPli 8.3 ,16 October update Weather icon and , city, wind disappeared.

enigma2-plugin-skins-pd1loi-hd-night  

 

Skin pd1loi-hd-night 

[mahdi-dz]

GStreamer is availaible on Openpli7.3 and iptv works better than openpli8.3

 

Edited by mahdi-dz, 22 October 2022 - 09:16.

[ghuss]

GStreamer is availaible on Openpli7.3 and iptv works better than openpli8.3  (Vu+ Duo2)

)

 

I have tried Openpli 7.3 and found 8.3 moves faster on IPTV from channel to another channel

Edited by ghuss, 22 October 2022 - 16:12.

[WanWizard]

It is display only, it is not used, not on any box with a HiSilicon chipset. Which is why it is removed from the about screen, it is useless information.