try pluto tv channel with Service Gstplayer 5001 without activating serviceapp.
it's work faster on Openpli7.3 but doesn't work on Openpli8.3 (black screen) .
Posted 31 October 2022 - 18:50
Edited by biko_73, 31 October 2022 - 18:52.
Posted 31 October 2022 - 19:41
A patch where? That links just points to a github repository. It looks like they copy OpenVIX, which in turn is based on OpenPLi.
If fixes are not published backup upstream, code becomes a mess. They are free to send us a PR.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 31 October 2022 - 21:37
A patch where? That links just points to a github repository. It looks like they copy OpenVIX, which in turn is based on OpenPLi.
If fixes are not published backup upstream, code becomes a mess. They are free to send us a PR
let me know how to contact pm to send you the patch link
i think github repository link is enough
Posted 31 October 2022 - 21:47
No need to send a PR, you can post it here.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 November 2022 - 08:01
Posted 7 November 2022 - 09:21
Posted 7 November 2022 - 09:50
IPaudio plugin
wget -q "--no-check-certificate" http://ipkinstall.at...io/installer.sh -O - | /bin/sh
This https://github.com/zKhadiri/IPAudio ?
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 7 November 2022 - 16:42
If other OpenPLi developers agree, then I can add this patch.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 7 November 2022 - 17:01
If other OpenPLi developers agree, then I can add this patch.
I don't have a github account. Thanks for adding patch when openPLi developers agree.
Edited by Amai, 7 November 2022 - 17:10.
Posted 11 November 2022 - 14:12
Posted 12 November 2022 - 08:31
I'm having problems with my VuUltimo4K after the last update. After several dozen minutes from starting, the receiver stops responding - the time on the display stops, there is no way to change the channel, there is no way to reset the receiver from the remote control - only a hard reset with the switch on the back of the receiver. What could be the cause of this? Log file attached.
Edit:
Can't reset with BT remote. From the regular remote I can reset the receiver from the remote.
Edited by lopess, 12 November 2022 - 08:38.
Laminas 150 - 39E | 36E , WaveFrontier T90 - 31,5E | 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W - 2.0/2.1 Spaun/WaveFrontier multiswich system
VU+ Ultimo 4K, Duo4k, Duo4KSE, Zgemma H7s
Posted 12 November 2022 - 15:50
@Lopess
With the Release 8.3? To be honest I can’t think of any specific reason that might cause this issue unless you watch Ziggo cable in Holland, which I don’t expect.
Both my Ultimo 4K’s run ok without any specific issues.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 12 November 2022 - 16:47
@Lopess
With the Release 8.3? To be honest I can’t think of any specific reason that might cause this issue unless you watch Ziggo cable in Holland, which I don’t expect.
Both my Ultimo 4K’s run ok without any specific issues.
Yep, this happened after the last update. I don't know what's causing it, I've never had this problem before. Maybe one of the plugins is causing it. I have no idea. Although I have very few additional plugins, IPTVPlayer, AnalogClock, SoftwareManager and astra-sm only. Can you see my log? Can you deduce anything from it?
Laminas 150 - 39E | 36E , WaveFrontier T90 - 31,5E | 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W - 2.0/2.1 Spaun/WaveFrontier multiswich system
VU+ Ultimo 4K, Duo4k, Duo4KSE, Zgemma H7s
Posted 12 November 2022 - 17:00
It is a kernel crash.
Make an autobackup if you don't have one, flash the box, and restore the autobackup.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 11 guests, 0 anonymous users