2022 replies to this topic

[WanWizard]

I have the Pulse 4K up and running now, latest OpenPLi develop, with E2-DarkOS from July 20th.

 

I'm going around the GMEPG at the moment, but see no significant difference in response between this box and the SF8008, or the Solo 4K for that matter?

 

Short video: https://streamable.com/yidklt

[Huevos]

I have the Pulse 4K up and running now, latest OpenPLi develop, with E2-DarkOS from July 20th.

 

I'm going around the GMEPG at the moment, but see no difference in response between this box and the SF8008, or the Solo 4K for that matter?

 

Short video: https://streamable.com/yidklt

I don't the box so Dimitar needs to comment. But the problem I would have thought is opening the screen.

[DimitarCC]

Hmmm interesting its much slower on my side.... I will investigate

[WanWizard]

OpenVIX (and other OE-A images) have all sorts of hacks in the graphics code to compensate for double buffering issues on some HiSil boxes, causing weird repainting issues or blinking graphics sometimes (like for example in the virtual keyboard).

 

These hacks basically slow down everything as they delay painting to refresh cycles (as I understood it, not really my expertise).

 

It's one of the many reasons why people don't like OpenATV, as it slows down the entire GUI on those boxes, even navigating the menu's can be slow.

[DimitarCC]

OK. GMEPG graphics restored in the skin. Lets see how it will goes....

[WanWizard]

Try flashing your box with an OpenPLi develop, and see if you notice a difference between it and OpenVIX ?

[DimitarCC]

I will. However no basis for comparition since vix gepg have a lot more functions and more code compared to PLi gmepg...

[WanWizard]

I could comment on that, but I won't...

 

But the point is imho clear, OE-A type images need an option to disable graphics due to their bloat, but OpenPLi doesn't...

[littlesat]

In OpenPLi the gmepg is (still) a plugin... there was years ago a lot of code stuff done and the gmpeg was migrated in vix/openatv to the standard EPG stuff.... and they did the 'hatefully' Ziggo and other boxes stile of navigation where you can 'zap' through EPG with left/right while this was zap and even did Neutrino stuff where I never get used to and actually doing it enigma2 style was always 'smart'.... 

Basically the GMEPG does not have real more functionality... it is differently implemented as it can 'popup' in normal infobar with two channels. It is (indeed) more/better integrated into the 'rest'.... But even when it is a plugin a third screen that just shows two channels with timer options etc... could be added....

[Huevos]

In OpenPLi the gmepg is (still) a plugin... there was years ago a lot of code stuff done and the gmpeg was migrated in vix/openatv to the standard EPG stuff.... and they did the 'hatefully' Ziggo and other boxes stile of navigation where you can 'zap' through EPG with left/right while this was zap and even did Neutrino stuff where I never get used to and actually doing it enigma2 style was always 'smart'.... 

Basically the GMEPG does not have real more functionality... it is differently implemented as it can 'popup' in normal infobar with two channels. It is (indeed) more/better integrated into the 'rest'.... But even when it is a plugin a third screen that just shows two channels with timer options etc... could be added....

The current EPG code in ViX was written from scratch a couple of years ago, not shared with any other distro.

enigma2/lib/python/Screens/EpgSelectionBase.py
	enigma2/lib/python/Screens/EpgSelectionChannel.py
	enigma2/lib/python/Screens/EpgSelectionGrid.py
	enigma2/lib/python/Screens/EpgSelectionInfobarSingle.py
	enigma2/lib/python/Screens/EpgSelectionMulti.py
	enigma2/lib/python/Screens/EpgSelectionSimilar.py
	enigma2/lib/python/Screens/EpgSelectionSingle.py

    
enigma2/lib/python/Components/EpgListBase.py
	enigma2/lib/python/Components/EpgListGrid.py
	enigma2/lib/python/Components/EpgListMulti.py
	enigma2/lib/python/Components/EpgListSingle.py

 

[littlesat]

The current EPG code in ViX was written from scratch a couple of years ago, not shared with any other distro.

 

Would be a sweet candy to share... is OpenVix already fallback tuner (with timer) compatible?

[WanWizard]

Given the fact it seems to have performance issues on specific hardware, I'd rather not...

[WanWizard]

Can maybe someone split the boxinfo stuff from the skin discussion?

 

Moved to the enigma.info topic.

[DimitarCC]

So a new UI change/addition. Separator lines for ConfigList.

 

https://github.com/O...igma2/pull/4049

[littlesat]

When it compiles…
For this skin we need a slight adjustment…. In the addon infobar the tuner letters are not always fully visible (eg J.)… maybe add progress bar for snr there. And adjust the simple second infobar.

Edited by littlesat, 9 August 2024 - 12:45.

[DimitarCC]

When it compiles…

 

It compiles now.

 

 

For this skin we need a slight adjustment…. In the addon infobar the tuner letters are not always fully visible (eg J.)… maybe add progress bar for snr there. And adjust the simple second infobar.

 

What you mean with that? Can you give me more details or post a screenshot what is not visible and where?

[littlesat]

Somewhere next week I try to resolve it.

[littlesat]

Update for InfoBarAdds...

 

-Fix Tuner letters as the widget needs to be define a bit heigher

-Add progress bar for SNR

                <!-- InfoBarAdds -->
                <screen name="InfoBarAdds" title="InfoBarAdd" position="38,38" size="1145,160" backgroundColor="transparent" flags="wfNoBorder">
                                <eLabel position="0,0" size="1145,160" zPosition="-11" backgroundColor="background5" cornerRadius="12"/>
                                <eLabel position="2,2" size="1141,156" zPosition="-10" backgroundColor="background" cornerRadius="10"/>
                                <widget source="session.CurrentService" render="Label" position="10,10" size="1125,35" backgroundColor="background" zPosition="1" foregroundColor="foreground" font="Regular;26" valign="center" halign="center">
                                                <convert type="PliExtraInfo">ServiceInfo</convert>
                                </widget>
                                <widget source="session.CurrentService" render="Label" position="10,45" size="1125,35" backgroundColor="background" font="Regular; 26" zPosition="21" halign="center">
                                                <convert type="CryptoInfo">FullInfo</convert>
                                </widget>
                                <widget source="session.CurrentService" render="Label" position="10,80" size="1125,35" backgroundColor="background" font="Regular; 26" zPosition="21" halign="center">
                                                <convert type="ServiceName">StreamUrl</convert>
                                </widget>
                                <widget source="session.CurrentService" render="Label" position="10,115" size="325,40" backgroundColor="background" zPosition="1" foregroundColor="foreground" font="CAID;36" valign="center" halign="left">
                                                <convert type="PliExtraInfo">CryptoBar</convert>
                                </widget>
                                <widget source="session.FrontendInfo" render="Label" position="980,115" size="150,35" backgroundColor="background" zPosition="1" foregroundColor="foreground" font="CAID;36" valign="center" halign="right">
                                                <convert type="FrontendInfo">USE_TUNERS_STRING</convert>
                                </widget>
                                <widget source="session.FrontendStatus" render="FixedLabel" text="SNR" position="435,115" size="50,24" valign="center" backgroundColor="background" zPosition="2" font="Regular;21">
                                                <convert type="FrontendInfo">SNR</convert>
                                                <convert type="ConditionalShowHide"/>
                                </widget>
                                <widget source="session.FrontendStatus" render="Label" position="595,115" size="140,24" valign="center" zPosition="2" backgroundColor="background" halign="right" font="Regular;21">
                                                <convert type="FrontendInfo">SNRdB</convert>
                                                <convert type="ConditionalShowHide"/>
                                </widget>
                                <widget source="session.FrontendStatus" render="Progress" position="435,147" size="300,6" backgroundColor="background" foregroundColor="blue" zPosition="1" borderWidth="1" borderColor="grey" cornerRadius="3">
                                                <convert type="FrontendInfo">SNR</convert>
                                                <convert type="ConditionalShowHide"/>
                                </widget>
                </screen>

Edited by littlesat, 21 August 2024 - 19:13.

[DimitarCC]

Added.

[cobus]

The menu doesn't work anymore with the latest update i have green screen.

OpenPLi Enigma2 crash log

crashdate=za sep 21 16:44:32 2024
compiledate=Sep 20 2024
skin=E2-DarkOS/skin.xml
sourcedate=2024-09-20
branch=develop
rev=e2c8683
component=Enigma2

stbmodel=uno4kse
stbmodel=dm8000
kernelcmdline=kexec=1 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=666m bmem=641m@350m bmem=641m@2430m kernel=/linuxrootfs1/zImage root=/dev/mmcblk0p4 rootsubdir=linuxrootfs1
nimsockets=NIM Socket 0:
imageissue=openpli develop %h


REMOVE Peer vuuno4kse
REMOVE Peer vuuno4kse
REMOVE Peer vuuno4kse
ADD Peer hd60=hd60.local:8001
ADD Peer hd60=hd60.local:8001
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
  File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1091, in mainMenu
  File "/usr/lib/enigma2/python/StartEnigma.py", line 296, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/StartEnigma.py", line 306, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/StartEnigma.py", line 249, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/StartEnigma.py", line 273, in doInstantiateDialog
    dlg.applySkin()
  File "/usr/lib/enigma2/python/Screens/Screen.py", line 263, in applySkin
  File "/usr/lib/enigma2/python/Screens/Screen.py", line 296, in createGUIScreen
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 251, in layoutFinished
  File "/usr/lib/enigma2/python/Screens/Screen.py", line 239, in screenContentChanged
  File "skin applet", line 21, in <module>
AttributeError: 'MainMenu' object has no attribute 'setFont'
[ePyObject] (CallObject(<bound method ActionMap.action of <Components.ActionMap.HelpableActionMap object at 0xb003f3e8>>,('InfobarMenuActions', 'mainMenu')) failed)


dmesg

<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 10.3.0 (GCC) ) #1 SMP Sat Jun 15 13:47:42 UTC 2024
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine model: UNO4KSE
<6>[    0.000000] moving dtb from 0x0000000001723000 to 0x00000000008f3860
<6>[    0.000000] bmem: Reserved 641 MiB at 0x0000000015e00000
<6>[    0.000000] bmem: Reserved 641 MiB at 0x0000000097e00000
<6>[    0.000000] cma: Reserved 16 MiB at 0x0000000096c00000
<4>[    0.000000] Forcing write-allocate cache policy for SMP
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 516096
<7>[    0.000000]   DMA zone: 684 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 87552 pages, LIFO batch:15
<7>[    0.000000]   HighMem zone: 428544 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 12 pages/cpu @d45ac000 s16844 r8192 d24116 u49152
<7>[    0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<6>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515412
<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=666m bmem=641m@350m bmem=641m@2430m
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 706428K/2064384K available (6275K kernel code, 311K rwdata, 2028K rodata, 308K init, 198K bss, 1341572K reserved, 16384K cma-reserved, 383972K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
<5>[    0.000000]     vmalloc : 0xd5800000 - 0xff000000   ( 664 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xd5600000   ( 342 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc08242d8   (8305 kB)
<5>[    0.000000]       .init : 0xc0825000 - 0xc0872000   ( 308 kB)
<5>[    0.000000]       .data : 0xc0872000 - 0xc08bfe70   ( 312 kB)
<5>[    0.000000]        .bss : 0xc08c2000 - 0xc08f3860   ( 199 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd5802000, parent irq: 93)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd5808000, parent irq: 64)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580aa00, parent irq: 65)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580c640, parent irq: 95)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580e200, parent irq: 58)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd5810380, parent IRQ(s): 3)
<6>[    0.000000] MCP: Enabling write pairing
<6>[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[    0.000010] Switching to timer-based delay loop, resolution 37ns
<6>[    0.000357] Console: colour dummy device 80x30
<6>[    0.000375] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[    0.000383] pid_max: default: 32768 minimum: 301
<6>[    0.000482] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000487] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000952] CPU: Testing write buffer coherency: ok
<6>[    0.001115] CPU0: update cpu_capacity 1024
<6>[    0.001120] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001326] Setting up static identity map for 0x8480 - 0x84d8
<6>[    0.003869] CPU1: update cpu_capacity 1024
<6>[    0.003872] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.003924] Brought up 2 CPUs
<6>[    0.003934] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[    0.003939] CPU: All CPU(s) started in SVC mode.
<6>[    0.004256] devtmpfs: initialized
<6>[    0.013122] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.013364] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.014613] NET: Registered protocol family 16
<6>[    0.015999] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[    0.023252] cpuidle: using governor ladder
<6>[    0.032257] cpuidle: using governor menu
<6>[    0.039134] No ATAGs?
<6>[    0.039161] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.039167] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.039391] Broadcom Brahma-B15 readahead cache at: 0xd5b14478
<6>[    0.055842] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
<6>[    0.056025] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
<5>[    0.056381] SCSI subsystem initialized
<7>[    0.056538] libata version 3.00 loaded.
<6>[    0.056906] usbcore: registered new interface driver usbfs
<6>[    0.056949] usbcore: registered new interface driver hub
<6>[    0.056991] usbcore: registered new device driver usb
<6>[    0.057057] Linux video capture interface: v2.00
<6>[    0.057134] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.057139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.057161] PTP clock support registered
<6>[    0.057682] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.058750] Switched to clocksource arch_sys_counter
<5>[    0.058957] FS-Cache: Loaded
<4>[    0.065734] thermal thermal_zone0: failed to read out thermal zone (-22)
<6>[    0.065836] NET: Registered protocol family 2
<6>[    0.066156] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.066179] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.066217] TCP: Hash tables configured (established 4096 bind 4096)
<6>[    0.066257] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.066269] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.066366] NET: Registered protocol family 1
<6>[    0.066632] RPC: Registered named UNIX socket transport module.
<6>[    0.066637] RPC: Registered udp transport module.
<6>[    0.066640] RPC: Registered tcp transport module.
<6>[    0.066643] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.066656] PCI: CLS 0 bytes, default 64
<6>[    0.066789] Unpacking initramfs...
<6>[    0.129566] Freeing initrd memory: 1692K (c157c000 - c1723000)
<4>[    0.129797] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
<6>[    0.129837] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[    0.130616] futex hash table entries: 512 (order: 3, 32768 bytes)
<5>[    0.131802] NFS: Registering the id_resolver key type
<5>[    0.131828] Key type id_resolver registered
<5>[    0.131832] Key type id_legacy registered
<6>[    0.131845] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.131851] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>[    0.132140] fuse init (API version 7.23)
<6>[    0.132943] bounce: pool size: 64 pages
<6>[    0.132979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    0.132988] io scheduler noop registered
<6>[    0.132995] io scheduler deadline registered
<6>[    0.133020] io scheduler cfq registered (default)
<6>[    0.133259] brcm-gisb-arb f0400000.gisb-arb: registered mem: d5b30000, irqs: 261, 262
<6>[    0.134044] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
<6>[    0.134430] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<4>[    0.134478] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
<6>[    0.234616] brcm-pci f0460000.pcie: link down
<6>[    0.234659] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
<4>[    0.234694] brcm-pci f0490000.pcie: no identity map; PCI drivers may fail
<6>[    0.334833] brcm-pci f0490000.pcie: link down
<6>[    0.336148] brcmstb_memc f1102000.memc-ddr: registered
<6>[    0.336187] brcmstb_memc f1182000.memc-ddr: registered
<6>[    0.336370] brcm-waketimer f0417580.waketimer: registered, with irq 263
<6>[    0.336563] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.337893] console [ttyS0] disabled
<6>[    0.337919] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
<6>[    1.086596] console [ttyS0] enabled
<6>[    1.090449] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
<6>[    1.099711] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
<6>[    1.112089] loop: module loaded
<6>[    1.116095] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 0
<6>[    1.122653] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 1
<6>[    1.129226] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
<4>[    1.136639] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
<6>[    1.142682] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[    1.160742] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[    1.169711] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part 
<6>[    1.179429] scsi host0: brcm-ahci
<6>[    1.183001] scsi host1: brcm-ahci
<6>[    1.186484] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
<6>[    1.194416] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
<6>[    1.202352] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[    1.209483] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
<3>[    1.215124] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
<4>[    1.221161] brcmstb_qspi: probe of f03e3400.spi failed with error -22
<6>[    1.227640] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
<4>[    1.233786] m25p80 spi32766.0: found mx25l3255e, expected m25p80
<6>[    1.239829] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
<5>[    1.245092] 5 ofpart partitions found on MTD device spi32766.0
<5>[    1.250941] Creating 5 MTD partitions on "spi32766.0":
<5>[    1.256096] 0x000000000000-0x000000200000 : "flash0.bolt"
<5>[    1.262062] 0x000000200000-0x000000210000 : "flash0.macadr"
<5>[    1.268105] 0x000000210000-0x000000220000 : "flash0.nvram"
<5>[    1.274053] 0x000000220000-0x000000230000 : "flash0.devtree"
<5>[    1.280145] 0x000000000000-0x000000400000 : "flash0"
<6>[    1.286182] libphy: Fixed MDIO Bus: probed
<6>[    1.290833] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<4>[    1.296727] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
<6>[    1.315726] libphy: bcmgenet MII bus: probed
<6>[    1.340531] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
<6>[    1.346382] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
<6>[    1.352503] xhci-brcm: xHCI BRCM driver
<6>[    1.371218] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[    1.376994] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
<6>[    1.385103] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
<6>[    1.394012] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
<6>[    1.400653] hub 1-0:1.0: USB hub found
<3>[    1.404441] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.411728] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[    1.417489] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
<6>[    1.425379] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    1.433844] hub 2-0:1.0: USB hub found
<6>[    1.437622] hub 2-0:1.0: 2 ports detected
<6>[    1.442014] ehci-brcm: EHCI BRCM driver
<6>[    1.445975] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
<6>[    1.451757] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
<6>[    1.469750] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
<6>[    1.476740] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<6>[    1.481737] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[    1.482150] hub 3-0:1.0: USB hub found
<6>[    1.482169] hub 3-0:1.0: 1 port detected
<6>[    1.482421] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
<6>[    1.482523] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
<6>[    1.492647] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
<6>[    1.497729] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[    1.498157] hub 4-0:1.0: USB hub found
<6>[    1.498193] hub 4-0:1.0: 1 port detected
<6>[    1.498521] ohci-brcm: OHCI BRCM driver
<6>[    1.498618] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
<6>[    1.498766] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
<6>[    1.498848] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
<6>[    1.553268] hub 5-0:1.0: USB hub found
<6>[    1.553306] hub 5-0:1.0: 1 port detected
<6>[    1.553563] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
<6>[    1.553672] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
<6>[    1.553790] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
<6>[    1.582798] ata1.00: ATA-9: Dahua C800 2.5 inch SATA 960GB SSD, V0609B0, max UDMA/133
<6>[    1.590649] ata1.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 31/32)
<6>[    1.599741] ata1.00: configured for UDMA/133
<6>[    1.603175] hub 6-0:1.0: USB hub found
<6>[    1.603214] hub 6-0:1.0: 1 port detected
<6>[    1.603533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.603544] ehci-pci: EHCI PCI platform driver
<6>[    1.603593] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.603601] ohci-pci: OHCI PCI platform driver
<6>[    1.603746] usbcore: registered new interface driver usb-storage
<6>[    1.603939] mousedev: PS/2 mouse device common for all mice
<6>[    1.604301] i2c /dev entries driver
<6>[    1.604894] IR NEC protocol handler initialized
<6>[    1.604899] IR RC5(x/sz) protocol handler initialized
<6>[    1.604903] IR RC6 protocol handler initialized
<6>[    1.604908] IR JVC protocol handler initialized
<6>[    1.604913] IR Sony protocol handler initialized
<6>[    1.604917] IR SANYO protocol handler initialized
<6>[    1.604922] IR Sharp protocol handler initialized
<6>[    1.604927] IR MCE Keyboard/mouse protocol handler initialized
<6>[    1.604931] IR XMP protocol handler initialized
<6>[    1.605662] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
<6>[    1.606266] brcmstb-cpufreq f03e257c.cpu_clk_div: registered
<6>[    1.606467] sdhci: Secure Digital Host Controller Interface driver
<6>[    1.606468] sdhci: Copyright(c) Pierre Ossman
<6>[    1.606473] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    1.607815] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
<6>[    1.607818] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
<6>[    1.637730] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[    1.637969] usbcore: registered new interface driver usbhid
<6>[    1.637971] usbhid: USB HID core driver
<6>[    1.638533] NET: Registered protocol family 17
<5>[    1.638662] Key type dns_resolver registered
<5>[    1.638708] Registering SWP/SWPB emulation handler
<6>[    1.645182] ALSA device list:
<6>[    1.645183]   No soundcards found.
<5>[    1.792663] scsi 0:0:0:0: Direct-Access     ATA      Dahua C800 2.5 i 9B0  PQ: 0 ANSI: 5
<5>[    1.801435] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
<5>[    1.809121] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    1.809281] sd 0:0:0:0: [sda] Write Protect is off
<7>[    1.809286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    1.809331] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    1.814501]  sda: sda1
<5>[    1.815096] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    1.852372] mmc0: MAN_BKOPS_EN bit is not set
<6>[    1.863010] mmc0: new high speed MMC card at address 0001
<6>[    1.868636] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB 
<6>[    1.873237] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
<6>[    1.879220] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
<6>[    1.885202] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
<6>[    1.893503]  mmcblk0: p1 p2 p3 p4
<6>[    1.946737] ata2: SATA link down (SStatus 0 SControl 300)
<6>[    1.953886] Freeing unused kernel memory: 308K (c0825000 - c0872000)
<6>[    2.034706] EXT4-fs (mmcblk0p4): recovery complete
<6>[    2.039765] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
<30>[    2.770308] udevd[862]: starting version 3.2.10
<5>[    2.782054] random: udevd urandom read with 7 bits of entropy available
<30>[    2.804806] udevd[863]: starting eudev-3.2.10
<6>[    3.537024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[    3.595109] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
<4>[    4.042808] procmk_init
<4>[    4.048887] bcm_event: module license 'Proprietary' taints kernel.
<4>[    4.055107] Disabling lock debugging due to kernel taint
<6>[    4.269029] nexus.ko: virtual irq: enabled (273)
<6>[    4.273750] nexus.ko: shared gpio banks: enabled
<6>[    9.156957] DVB: registering new adapter (_vuplus_uno4kse_)
<4>[    9.446396] bcm7252s: hotplug_callback(): 
<4>[    9.446396] Hotplug - status.connected 1:0:1
<4>[    9.453494] bcm7252s: hotplug_callback(): 
<4>[    9.453494] Hotplug - connecting HDMI to display 0xe
<6>[    9.656730] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
<4>[    9.689736] [MPVR]: >> misc_pvr_init
<4>[    9.694585] [VID]: 6bcm7335_video_init
<4>[    9.723533] [AUD]: 6bcm7335_audio_init
<4>[    9.727620] [AUD]: >> bcm_audio_capture_init
<4>[    9.735795] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d3a8f000 state=d36d9000  config=bf7c8d08
<6>[    9.746235] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    9.760559] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d3a37400 state=d18ac800  config=bf7c8d10
<6>[    9.770784] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    9.784530] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d3a8c400 state=d18ac000  config=bf7c8d18
<6>[    9.794751] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    9.808542] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d3a8a400 state=d18ae800  config=bf7c8d20
<6>[    9.818750] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    9.832547] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d3a37000 state=d18ae000  config=bf7c8d28
<6>[    9.842767] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    9.856664] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d3a8f800 state=d18b1800  config=bf7c8d30
<6>[    9.866876] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    9.880557] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d3a8c000 state=d18b1000  config=bf7c8d38
<6>[    9.890777] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    9.904547] fe_cap.qam : 1, fe_cap.ofd : 0, fe_cap.satellite:0   handle=d3a8ec00 state=d18b4800  config=bf7c8d40
<6>[    9.914890] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[    9.928346] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
<4>[    9.951037] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
<4>[    9.958967] BKNI_Malloc(linuxkernel) top users:
<4>[    9.958967]     blocks,   bytes, filename:line
<4>[    9.967964]       1148,  257008, BSEAV/lib/utils/balloc.c:31
<6>[    9.992982] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>[   10.004860] [LCD]: registered
<6>[   10.614761] [CI]: registered ci0
<6>[   10.623046] [CI]: CI interface initialised
<6>[   10.623046] 
<6>[   10.635777] [DFP]: registered dbox fp
<6>[   10.642101] [SC]: registered sci0
<4>[   12.092731] system_time_set wakeup mode get 
<4>[   12.156731] system_time_set wakeup mode get 0xc3
<6>[   12.769735] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[   12.779130] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[   14.781828] bcmgenet f0b00000.ethernet eth0: Link is Down
<6>[   15.842932] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[   16.691267] NET: Registered protocol family 10
<6>[   16.870655] Bluetooth: Core ver 2.20
<6>[   16.874379] NET: Registered protocol family 31
<6>[   16.879167] Bluetooth: HCI device and connection manager initialized
<6>[   16.885614] Bluetooth: HCI socket layer initialized
<6>[   16.893491] Bluetooth: L2CAP socket layer initialized
<6>[   16.898621] Bluetooth: SCO socket layer initialized
<4>[   17.882988] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[   17.887117] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   17.891819] [VID]: VIDEO_PLAY 1  5 0
<4>[   17.900708] [VID]: VIDEO_CONTINUE 1  1 
<4>[   17.904697] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[   18.065520] [VID]: VIDEO_STOP 0  1
<4>[   18.069987] [VID]: VIDEO_SELECT_SOURCE 0  0
<5>[   19.276089] random: nonblocking pool is initialized
<4>[   21.709765] [AUD]: AUDIO_SET_MUTE 0 
<4>[   21.714329] [AUD]: AUDIO_SET_MIXER -781672808 
<4>[   21.718819] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[   21.724200] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
<4>[   21.730848] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<3>[   23.206443] [DFP]: unknown cmd 0x5401
<3>[   23.210206] [DFP]: unknown cmd 0x5401
<4>[   25.194139] [AUD]: AUDIO_SET_MIXER -781672808 
<4>[   25.198629] [AUD]: AUDIO_SET_MIXER : amixl 51, amixr 51
<4>[   25.204266] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   25.211262] [AUD]: AUDIO_SET_MIXER : next left volume -3712, right volume -3712
<4>[   25.839391] [AUD]: AUDIO_SELECT_SOURCE 1 
<4>[   25.844291] [AUD]: AUDIO_PAUSE 1 
<4>[   25.854967] [AUD]: AUDIO_SET_BYPASS_MODE 10 
<4>[   25.859299] [AUD]: downmix 0 state : 0
<4>[   25.862417] [AUD]: AUDIO_CONTINUE -1344763672 2 aph=0x0
<4>[   25.869888] [AUD]: AUDIO_PLAY 10 decoder start : 0
<4>[   25.874818] [AUD]: AUDIO_PLAY : Starting Playpump
<4>[   25.919427] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   25.923945] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[   25.928133] [VID]: VIDEO_PLAY 0  2 0
<4>[   25.937001] [VID]: VIDEO_CONTINUE 0  1 
<4>[   25.940913] [VID]: VIDEO_CLEAR_BUFFER 0  1 0
<4>[   26.102103] [VID]: VIDEO_STOP 0  1
<4>[   26.106641] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[   39.950889] [AUD]: AUDIO_PAUSE 0 
<4>[   39.956117] [AUD]: AUDIO_STOP -1344763672 
<4>[   39.971805] [AUD]: AUDIO_SELECT_SOURCE 0 
<4>[   84.464863] [AUD]: AUDIO_SET_MUTE 0 
<4>[   84.559171] [AUD]: AUDIO_SELECT_SOURCE 1 
<4>[   84.563539] [AUD]: AUDIO_PAUSE 1 
<4>[   84.582406] [AUD]: AUDIO_SET_BYPASS_MODE 10 
<4>[   84.585025] [AUD]: AUDIO_CONTINUE -1344763672 2 aph=0x0
<4>[   84.586675] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   84.586743] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[   84.586747] [VID]: VIDEO_PLAY 0  2 0
<4>[   84.592383] [VID]: VIDEO_CONTINUE 0  1 
<4>[   84.592388] [VID]: VIDEO_CLEAR_BUFFER 0  1 0
<4>[   84.612929] [AUD]: downmix 0 state : 0
<4>[   84.616875] [AUD]: AUDIO_PLAY 10 decoder start : 0
<4>[   84.621909] [AUD]: AUDIO_PLAY : Starting Playpump
<4>[   84.759488] [VID]: VIDEO_STOP 0  1
<4>[   84.763844] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[  105.247268] [AUD]: AUDIO_PAUSE 0 
<4>[  105.252637] [AUD]: AUDIO_STOP -1344763672 
<4>[  105.281321] [AUD]: AUDIO_SELECT_SOURCE 0 
<4>[  106.016298] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[  106.020881] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[  106.025356] [VID]: VIDEO_PLAY 1  5 0
<4>[  106.034239] [VID]: VIDEO_CONTINUE 1  1 
<4>[  106.038102] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[  106.198975] [VID]: VIDEO_STOP 0  1
<4>[  106.204023] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[  108.961107] [AUD]: AUDIO_SET_MUTE 0 
<4>[  108.965653] [AUD]: AUDIO_SET_MIXER -781746536 
<4>[  108.970130] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[  108.975204] [AUD]: AUDIO_SET_MIXER : next left volume -3712, right volume -3712
<4>[  108.982542] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<3>[  110.269174] [DFP]: unknown cmd 0x5401
<3>[  110.272955] [DFP]: unknown cmd 0x5401
<4>[  111.627806] [AUD]: AUDIO_SET_MIXER -781746536 
<4>[  111.632290] [AUD]: AUDIO_SET_MIXER : amixl 51, amixr 51
<4>[  111.637536] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  111.644533] [AUD]: AUDIO_SET_MIXER : next left volume -3712, right volume -3712
<4>[  112.125732] [AUD]: AUDIO_SELECT_SOURCE 1 
<4>[  112.129925] [AUD]: AUDIO_PAUSE 1 
<4>[  112.141794] [AUD]: AUDIO_SET_BYPASS_MODE 10 
<4>[  112.146159] [AUD]: downmix 0 state : 0
<4>[  112.149242] [AUD]: AUDIO_CONTINUE -1343725648 2 aph=0x0
<4>[  112.156625] [AUD]: AUDIO_PLAY 10 decoder start : 0
<4>[  112.161593] [AUD]: AUDIO_PLAY : Starting Playpump
<4>[  112.165512] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[  112.165557] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[  112.165560] [VID]: VIDEO_PLAY 0  2 0
<4>[  112.175355] [VID]: VIDEO_CONTINUE 0  1 
<4>[  112.175359] [VID]: VIDEO_CLEAR_BUFFER 0  1 0
<4>[  112.339715] [VID]: VIDEO_STOP 0  1
<4>[  112.344086] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[  175.014600] [AUD]: AUDIO_PAUSE 0 
<4>[  175.019867] [AUD]: AUDIO_STOP -1343725648 
<4>[  175.048919] [AUD]: AUDIO_SELECT_SOURCE 0 
<4>[  175.667361] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[  175.671617] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[  175.676099] [VID]: VIDEO_PLAY 1  5 0
<4>[  175.685292] [VID]: VIDEO_CONTINUE 1  1 
<4>[  175.689334] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[  175.850120] [VID]: VIDEO_STOP 0  1
<4>[  175.854855] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[  178.661152] [AUD]: AUDIO_SET_MUTE 0 
<4>[  178.665741] [AUD]: AUDIO_SET_MIXER -834183528 
<4>[  178.670226] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[  178.675305] [AUD]: AUDIO_SET_MIXER : next left volume -3712, right volume -3712
<4>[  178.682637] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<3>[  179.946823] [DFP]: unknown cmd 0x5401
<3>[  179.950599] [DFP]: unknown cmd 0x5401
<4>[  181.041289] [AUD]: AUDIO_SET_MIXER -834183528 
<4>[  181.045785] [AUD]: AUDIO_SET_MIXER : amixl 51, amixr 51
<4>[  181.051030] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  181.058012] [AUD]: AUDIO_SET_MIXER : next left volume -3712, right volume -3712
<4>[  181.527458] [AUD]: AUDIO_SELECT_SOURCE 1 
<4>[  181.531534] [AUD]: AUDIO_PAUSE 1 
<4>[  181.541070] [AUD]: AUDIO_SET_BYPASS_MODE 10 
<4>[  181.545425] [AUD]: downmix 0 state : 0
<4>[  181.549898] [AUD]: AUDIO_PLAY 10 decoder start : 0
<4>[  181.550802] [AUD]: AUDIO_CONTINUE -1343714672 2 aph=0x0
<4>[  181.560104] [AUD]: AUDIO_PLAY : Starting Playpump
<4>[  181.601563] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[  181.606162] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[  181.610323] [VID]: VIDEO_PLAY 0  2 0
<4>[  181.619411] [VID]: VIDEO_CONTINUE 0  1 
<4>[  181.623902] [VID]: VIDEO_CLEAR_BUFFER 0  1 0
<4>[  181.784924] [VID]: VIDEO_STOP 0  1
<4>[  181.789224] [VID]: VIDEO_SELECT_SOURCE 0  0