Sorry I meant this
name="key_blue"
source="key_blue" render="Label"
Posted 29 March 2024 - 11:47
I bring this to mind again.In noticed that in the Mountpoints management, there are no buttons there, so there should be Red=Close and Yellow=Delete mount
Can you post a screenshot how it looks like? Its weird that buttons are not there...
Of course, please see below (also added the about for info), I tested on a Vu Duo 4K and a Uclan Ustym 4K Pro
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 29 March 2024 - 12:01
Keep up the nice/good work !
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 29 March 2024 - 17:06
here is the last update of the skin with changed colours - posters
the other last update of the skin is without posters
remark ; do not forget to delete your e2-darkos skin before install this one
Edited by dany, 29 March 2024 - 17:08.
Posted 29 March 2024 - 18:19
When you made posters make it configurable… I recently pushed something that should make it possible:
There are those who like the skin when it contains posters , thats why i maked it for them
It makes the skin more beautiful, but in fact, i do not like the skin when it contains posters , because it makes the skin heavier and slower than before
If you found something special that does not affect the lightness and stability of the skin, this is a wonderful thing
regards
Posted 29 March 2024 - 18:35
Edited by littlesat, 29 March 2024 - 18:35.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 29 March 2024 - 19:55
Not only that, but 99% of all EPG events will not have a poster, so that is a lot of effort for nothing (not only coding effort, but also trying to fetch stuff online, parsing results, error handling, etc).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 2 April 2024 - 12:31
Reported this morning:
/usr/lib/python3.10/site-packages/PIL/Image.py:996: UserWarning: Palette images with Transparency expressed in bytes should be converted to RGBA images Traceback (most recent call last): File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 806, in updateEventInfo cur = self.getCurrentSelection() TypeError: 'float' object cannot be interpreted as an integer [ePyObject] (CallObject(<bound method SelectionEventInfo.updateEventInfo of <class 'Screens.ChannelSelection.ChannelSelection'>>,()) failed)
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 2 April 2024 - 12:51
It might also be interesting to report that this happens on the kirkstone branch...
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 2 April 2024 - 12:53
@Dany... can you please offer the screens you adapt here... instead of giving a modified skin code.... Then Dimitar can consider to take them over more easily...
For that events info menu I think it is better to show one info above the selection list and one below... instead of making it wide....
Edited by littlesat, 2 April 2024 - 12:55.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 2 April 2024 - 13:26
@Dany... can you please offer the screens you adapt here... instead of giving a modified skin code.... Then Dimitar can consider to take them over more easily...
For that events info menu I think it is better to show one info above the selection list and one below... instead of making it wide....
Indeed it will be easier when there is only the screens code posted.....
Vu+DUO4KSE, DM920UHD, Vu+Uno4KSE, SF8008Mini, 2xPulse4K, Vu+Solo2, Dreambox DM500HD, Triax 78 (7E,9E,13E,19.2E,23.5E) & 2xTriax 78 (39E)
Posted 2 April 2024 - 13:53
Sorry I meant this
name="key_blue"
source="key_blue" render="Label"
Read https://github.com/O...UTOMATICBUTTONS
Posted 2 April 2024 - 14:41
You newer stop learning, I see, there is a new widget addon and easy to configure
Edited by mrvica, 2 April 2024 - 14:42.
Posted 2 April 2024 - 15:26
Yep.... >10 years ago I made it easier as previously you needed to add the color buttons for reach screen and they did not show up on demand -and- Milo added the ePanels.... and now we have a new widget/renderer that does cover all... Thanks to DimitarCC....
Edited by littlesat, 2 April 2024 - 15:26.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 3 April 2024 - 16:43
@Dany... can you please offer the screens you adapt here... instead of giving a modified skin code.... Then Dimitar can consider to take them over more easily...
For that events info menu I think it is better to show one info above the selection list and one below... instead of making it wide....
littlesat ... For that events info menu I think it is better to show one info above the selection list and one below... instead of making it wide.
i think you mean choicebox , ok i did it as you like , within a few minutes, i will put here the adapted screens of the skin .
regards
Edited by dany, 3 April 2024 - 16:43.
Posted 3 April 2024 - 17:07
here is choicebox screen with fotos :
put it in skin.xml
<!-- ChoiceBox New -->
</screen>
<screen name="ChoiceBox" position="fill" title="ChoiceBox" >
<widget name="text" position="20,3" size="670,237" font="Regular;26" foregroundColor="green" transparent="1" />
<widget name="description" position="20,55" size="570,300" font="Regular; 25" foregroundColor="red" backgroundColor="background" transparent="1"/>
<widget name="list" position="20,280" size="900,520" font="Regular;27" itemHeight="40" scrollbarMode="showOnDemand" scrollbarWidth="5" backgroundColor="background" selectionPixmap="E2-DarkOS/selections/sel_1145x130.png" transparent="1"/>
<applet type="onLayoutFinish">
from enigma import eSize, ePoint
orgwidth = self.instance.size().width()
orgpos = self.instance.position()
textsize = self["text"].getSize()
textsize = (textsize[0] + 10, textsize[1] + 90)
count = len(self.list)
if count > 47:
count = 47
offset = 43 * count
wsizex = textsize[0] + 13
wsizey = textsize[1] + offset + 13
if (900 > wsizex):
wsizex = 700
wsize = (wsizex, wsizey)
self.instance.resize(eSize(*wsize))
self["text"].instance.resize(eSize(*textsize))
listsize = (wsizex - 20, 40 * count)
self["list"].instance.move(ePoint(10, textsize[1]))
self["list"].instance.resize(eSize(*listsize))
newwidth = wsize[0]
self.instance.move(ePoint((1920-wsizex)//2, (1080-wsizey)//(count > 7 and 2 or 3)))
</applet>
</screen>
0 members, 22 guests, 0 anonymous users