580 replies to this topic

[rudich]

Yes, the PC runs in a different subnet, but that shouldn't be a problem on other boxes with openpli9, I don't have a problem with FTP, I thought it was a development error because it's a new box, but if it's OK, I'll switch to filezilla. If I may, I would like to ask about backupsuite? Well thank you

Attached Files

•  4.png   145.42KB   6 downloads

[WanWizard]

I don't know if that is a problem or not, which is why I asked what is between the two. I also have my boxes on a seperate subnet, and run a commercial firewall as router, so if I don't explicitly open FTP, it won't work.

 

I can only say I've never seen a case where ftp didn't work.

 

As to backupsuite, chances are th SFX6008 isn't supported by backupsuite at the moment.

 

If you are in a position to edit files on the box, then find "backupsuite.sh" in "/usr/lib/enigma2/python/Plugins/Extensions/BackupSuite/" and on line 400, change

elif [ $SEARCH = "hd60" 

to

elif [ $SEARCH = "sfx6008" 

If that doesn't fix the error, try changing

elif [ $SEARCH = "sf8008"

which is 3 lines above it, and change that to

elif [ $SEARCH = "sfx6008"

[rudich]

Failed. It will probably be necessary to create a special link for this box. FTP also surprised me, but believe me, it doesn't work. Thank you very much.

[ringvei3]

Is there a working Netatmo weather plugin for openpli 9?

[40H3X]

With OpenPLi 9 we switched to PY 3, so please keep that in mind when you search for it.

[alabama]

Good evening,

 

could you please delete or repair the serienrecorder-plugin in your feed for OpenPLi 9.0?

 

Today, I flashed my SF8008 to 9.0 with the settings from 8.3.

The flash process installed the serienrecorder 4.6.5.

After updating to 4.6.7, I had a Green- Screen.

 

How can I flash the new Image withot loosing my settings but without installing the serienrecorder plugin?

 

Please help.

Attached Files

•  enigma2_crash.log   25.45KB   3 downloads

[KsRobak]

Hi Guys,

 

I have tried to install the plugin nordvpnconnector (0.4-r14) on my VU+ Zero 4K and i get the following message

 

* Solver encountered 1 problem(s)

* Problem 1/1:

*  - conflicting requests

*  - nothing provides kernel-module-xt-multiport needed by enigma2-plugin-extensions-nordvpnconnector-0.4-r14.all

*

*Solution 1:

*  - do not ask to install a package providing enigma2-plugin-extensions-nordvpnconnector

 

Execution finished !!

 

The NordVPN plugin is in the set of downloadable plugins under extensions so presumably it should work ?

 

What is kernel-module-xt-multiport  ?

[vanos]

hi there 

i have a duo 2 with openpli 8.3 and want to flash to 9 and have no local storage on this box för backup ,can i use a usb memory  for this

[piplan1966]

Hi

Yes you can flash from USB

[vanos]

i don't want to flash from usb but only use the usb for backup settings

[WanWizard]

Good evening,

 

could you please delete or repair the serienrecorder-plugin in your feed for OpenPLi 9.0?

 

Today, I flashed my SF8008 to 9.0 with the settings from 8.3.

The flash process installed the serienrecorder 4.6.5.

After updating to 4.6.7, I had a Green- Screen.

 

Please report the bug to the author: https://github.com/e...recorder/issues. We don't maintain the plugin. I see it has all sorts of code to self-update, that is always a pain.

 

How can I flash the new Image withot loosing my settings but without installing the serienrecorder plugin?

 

 

Flash the box. Do not restore a backup. Go through the first few setup questions, then exit the setup when you can. Go to auto backup in the menu, and press Blue to restore.

 

This restores the config but doesn't run autoinstall.

 

Atfer that, you could go to your backup directory, edit the "autoinstall" file and remove serienrecorder, then in the auto backup screen, press menu and run autoinstall.

[WanWizard]

i don't want to flash from usb but only use the usb for backup settings

 

I have a USB stick connected to every box, for a local backup.

[WanWizard]

The NordVPN plugin is in the set of downloadable plugins under extensions so presumably it should work ?

 

This plugin is not present in OpenPLi, so you haven't downloaded a genuine image. Ask whereever you downloaded this fake image.

 

What is kernel-module-xt-multiport  ?

 

It is a linux kernel module. Whether or not is is built depends on the vendors kernel configuration. Most vendors don't, only 18 boxes in the list we build images for have this module, none of them are VU+.

[alabama]

@WanWizard

Thank you for your detailed answer. I will test it with autobackup.

 

The current programmer MacDisein had to copy a lot of code from his predecessor. I don't know if he can fix the problem.

With versions OpenPLi 4 up to version OpenPLi 8.3 the serial recorder ran without any problems...
I will continue to use PLi 8.3 for now.

 

In the meantime I will try to make the error reproducible. The process shots my DNS settings...

[WanWizard]

The problem is that as soon as the plugins are initialized, the plugin starts checking if there is updated source code. That code assumes you have a working plugin, and crashes if you have no database yet (i.e. it is the first time it is started after installation).

 

That entire checking needs to be removed, self-updating plugins play havoc with software management.

[alabama]

Thanks for explanation.

I will forward it to the developer.

 

When I install OpenPLi, how descriped, without autoinstall all plugins, PLI works fine after restoring my settings with autobackup.

Network connection to internet is active.

After reboot, I have no internet connection, because I have no DNS settings.

Is that a bug?

 Netzwerk1.jpg   95.66KB   3 downloads

 Netzwerk2.jpg   73.57KB   3 downloads

 Netzwerk3.jpg   89.14KB   3 downloads

[MacDisein]

@WanWizard

Please provide the crashlog.

[domusmw]

witam

open atv naprawiło działanie modułu CI+ ECP CANAL+ ,możecie też poprawić u siebie  

 

Google translate:

Hello

 

open atv repaired the operation of the CI+ ECP CANAL+ module, you can also correct it yourself

Edited by Tech, 13 November 2023 - 08:41.
Please reply in English, use GoogleTranslate as I did.

[WanWizard]

@WanWizard

Please provide the crashlog.

 

This question is for @alabama.

[WanWizard]

Thanks for explanation.

I will forward it to the developer.

 

When I install OpenPLi, how descriped, without autoinstall all plugins, PLI works fine after restoring my settings with autobackup.

Network connection to internet is active.

After reboot, I have no internet connection, because I have no DNS settings.

Is that a bug?

 

No, see the release notes.

 

If you had a fixed DNS IP address in 8.3, you need to reconfigure that after the restore in 9.0, as the method of storing it has changed, and due to the way it used to work it can not be automatically migrated.
 

If that causes an autoinstall with the restore to fail, go to auto backup in the menu, press the menu button, and choose for autoinstall to restore your plugins after you fixed the DNS.