Posted 10 May 2024 - 22:41
OpenPLi doesn't pre-install all the USB tuner that are supported (so other image does it). So issue lsub command in telnet or ssh to find you device id.
Based on this you can google to find out which tuner driver needs to be installed to enable your tuner.
I doubt that the plugin install the driver.
May be read this thread:
https://forums.openp...xbox-usb-tuner/
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 May 2024 - 07:04
thanks for your hard work.
is it possible to support .webm format for video playback files?
I tested with openatv 7.4 , openbh 5.4 and Egami 10.4 images they all played .webm files without problem, but openpli 9 cannot play .webm files.
can you please fix that issue?
My box is: Vu+ DOU 4k se
Posted 11 May 2024 - 07:32
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 11 May 2024 - 11:22
Here's a test file: https://dl6.webmfile...ny_trailer.webm
Is uses Google VP8 video, and Vorbis audio. It plays without problems on several boxes here. Including my VU+ Solo 4K.
I don't have an Uno 4K SE, but the mediasink is compiled with both VP8 and VP9 support.
I think the question is what is in your webm file? As in what codecs were used?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 May 2024 - 11:43
Edited by littlesat, 11 May 2024 - 11:44.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 11 May 2024 - 11:53
My VU+ Solo 4K uses serviceapp with exteplayer3. My uClan Ustym4Kpro doesn't have serviceapp installed, it uses the standard gstreamer.
Both play this specific file fine, but no idea if that says something about all webm files, as webm is a container, like mkv.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 May 2024 - 18:16
Posted 18 May 2024 - 00:20
The chipset doesn't say much, even if a driver for that chipset is available, it must also support the USB ID of the device.
So it is very difficult to just go out and buy one, if you don't know the USB ID. Especially for modern devices that support 802.11AC, given the age of the linux kernel.
edit:
I checked what is available, most of the drivers are b/g/n drivers, max 300Mbps on 2.4Ghz.
Drivers that support 802.11ac are the 8812au, 8814au, 8821cu, 88x2bu, 88x2cu, 88xxau.
If you find a device, see if you can find the USB ID somewhere, then we can check if the driver supports it, or is possible patch the driver to add it.
Edited by WanWizard, 18 May 2024 - 00:33.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 18 May 2024 - 08:59
Can you post an example somewhere or a source to get this deviated ‘extension’.
tnx for your reply.
I download from youtube in 2k & 4k resolution. in .WEBM format.
you can get a test file from this wesite. just copy a link from youtube and select webm format
My box is: Vu+ DOU 4k se
Posted 18 May 2024 - 17:09
Here's a test file: https://dl6.webmfile...ny_trailer.webm
For your test file I played it, no video just audio.
I have other .mp4 2k files. I tried to play. No luck. It says "Gtsreamer plugin AV1 decoder not available"
I use latest openpli 9
Is uses Google VP8 video, and Vorbis audio. It plays without problems on several boxes here. Including my VU+ Solo 4K.
I don't have an Uno 4K SE, but the mediasink is compiled with both VP8 and VP9 support.
I think the question is what is in your webm file? As in what codecs were used?
My box is: Vu+ DOU 4k se
Posted 18 May 2024 - 17:35
If some weird site is the problem, why not use a more standard format when you download youtube media, like mp4 ?
That site probably does a media conversion, who knows what and how.
The box is an STB, not a media player, the support for "exotic" codecs and encoding errors in the media is very limited.
If you use firefox, look at the "Video DownloadHelper" extension, so external site needed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 2 July 2024 - 20:29
good evening, the Kirkstone version has stopped since 4/4/2024, do you know when an update will be released?
Posted 2 July 2024 - 21:01
Kirkstone is in early development, to become OpenPLi 10. End-users should not install it unless they have the knowledge to build the image themselfs and know how do handle failures.
We might even go Scarthgap which is the current Yocto LTS at the moment.
Next release will be OpenPLi 9.1, based on the current develop. But there is no timing, there is a lot of Enigma development going on at the moment, that needs to stabilize first.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 3 July 2024 - 09:21
Which version of python the OpenPli 9.1 will be?Kirkstone is in early development, to become OpenPLi 10. End-users should not install it unless they have the knowledge to build the image themselfs and know how do handle failures.
We might even go Scarthgap which is the current Yocto LTS at the moment.
Next release will be OpenPLi 9.1, based on the current develop. But there is no timing, there is a lot of Enigma development going on at the moment, that needs to stabilize first.
Posted 3 July 2024 - 09:36
Why do you want to know, we moved over to Python 3 with OpenPLi 9. Develop now has v3.9.9
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 3 July 2024 - 14:45
Posted 3 July 2024 - 14:50
Not OpenPLi. OE-A based develop images, yes.
OpenPLi 10 will most likely be based on Yocto 5, which will have 3.12.
The version is only relevant for developers, or those wanting to run OE-A plugins on OpenPLi (as OE-A plugin developers in general are never bothered with backward compatibility).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 3 July 2024 - 14:57
Yeah I am the second categoryNot OpenPLi. OE-A based develop images, yes.
OpenPLi 10 will most likely be based on Yocto 5, which will have 3.12.
The version is only relevant for developers, or those wanting to run OE-A plugins on OpenPLi (as OE-A plugin developers in general are never bothered with backward compatibility).
Posted 3 July 2024 - 15:23
The "developer that doesn't bother", or "those wanting to use OE-A images"? 
If the first, make sure you don't use python version specific code, or if you must. test for it and provide a fallback. If the second, you'll have to convince the developer not to use python version specific code...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 4 July 2024 - 18:14
0 members, 1 guests, 0 anonymous users
