Posted 21 February 2024 - 01:41
Hello guys, I desperately need your help in this one:
Is there a way to override the aspect ratio of the 2 images displayed in "picture-in-picture splitscreen mode" [blue button, green, 0] so that they cover all of the height of the tv (as it used to be on my dm8000 using openpli 6.x/7.x) ??!
PS.: now I'm on uno 4kse & openpli-9.0
Edited by GT8k, 21 February 2024 - 01:43.
Posted 21 February 2024 - 08:09
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 21 February 2024 - 08:19
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 21 February 2024 - 08:50
On the VU+ the PiP doesn't support full screen display you can only have for a quarter of the screen at max. If you try to increase it more you will find a driver bug that move slightly the PiP window and nothing happens. When you are in this bug you can no longer move the PiP screen, you will need to decrease the size until it really decrease and then you will be able to move again the PiP window.
It is a well-known VU+ driver bug that exist in every VU+ box that I owned.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 21 February 2024 - 09:21
you will need to decrease the size until it really decrease and then you will be able to move again the PiP window.
It is a well-known VU+ driver bug that exist in every VU+ box that I owned.
So there is nothing that can be done right? That is very sad, but thank you for this info.
Posted 21 February 2024 - 11:42
Verified... Indeed the VU+ driver(s) do not support this or have a bug here (and then we blocked it).
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 21 February 2024 - 12:33
I am not sure what the problem is here....
But here are PiP modes that are supported in my Vu+Duo4KSE
IMG_20240221_132758.jpg 144.73KB
9 downloads
IMG_20240221_132813.jpg 113.95KB
8 downloads
IMG_20240221_132828.jpg 117.3KB
10 downloads
IMG_20240221_132839.jpg 78.5KB
8 downloads
IMG_20240221_132851.jpg 123.59KB
9 downloads
Note the current mode shown in the screenshot. For me seems to work normal.....
Edited by DimitarCC, 21 February 2024 - 12:34.
Vu+DUO4KSE, DM920UHD, Vu+Uno4KSE, SF8008Mini, 2xPulse4K, Vu+Solo2, Dreambox DM500HD, Triax 78 (7E,9E,13E,19.2E,23.5E) & 2xTriax 78 (39E)
Posted 21 February 2024 - 13:48
Only the screen with pip next to live TV... here the live TV is stretched and the PIP limited to 1/4 of full screen, but centered.... when we make the PIP larger than 1/4 of the screen then the box behaves unstable... (I speculate the max resolution for PIP is here HD instead of 4K maybe based on preserved RAM memory and/or limitations by hardware)
Edited by littlesat, 21 February 2024 - 13:49.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 21 February 2024 - 14:08
Well the last shot above is with PiP on full screen and live TV is not even shown. So the PiP can be sized to full screen too.
For sure the maximum resolution of PiP is 1080p. 4K PiP doesnt work on any box i've seen so far.
Vu+DUO4KSE, DM920UHD, Vu+Uno4KSE, SF8008Mini, 2xPulse4K, Vu+Solo2, Dreambox DM500HD, Triax 78 (7E,9E,13E,19.2E,23.5E) & 2xTriax 78 (39E)
Posted 21 February 2024 - 15:06
So the PiP can be sized to full screen too -> I agree... but that is the one and only exception that does not crash the drivers.... (maybe because the memory from the main picture is still free here).
Edited by littlesat, 21 February 2024 - 15:07.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 21 February 2024 - 15:17
dont get it......
I have resized the PiP to this
1708524856507.JPEG 120.05KB
7 downloads
Its much more of a quarter of the screen....And i dont get any crashes...
Vu+DUO4KSE, DM920UHD, Vu+Uno4KSE, SF8008Mini, 2xPulse4K, Vu+Solo2, Dreambox DM500HD, Triax 78 (7E,9E,13E,19.2E,23.5E) & 2xTriax 78 (39E)
Posted 21 February 2024 - 15:26
#132828 picture is the closest to want I'm looking 4. But even this one cannot be done on uno4kse? What image do you use on the duo4k??I am not sure what the problem is here....
But here are PiP modes that are supported in my Vu+Duo4KSE
IMG_20240221_132758.jpg
Note the current mode shown in the screenshot. For me seems to work normal.....
Posted 21 February 2024 - 15:27
I don't care about 4k in pip, 1080 would be just enough... :'(Well the last shot above is with PiP on full screen and live TV is not even shown. So the PiP can be sized to full screen too.
For sure the maximum resolution of PiP is 1080p. 4K PiP doesnt work on any box i've seen so far.
Edited by GT8k, 21 February 2024 - 15:29.
Posted 21 February 2024 - 16:00
#132828 picture is the closest to want I'm looking 4. But even this one cannot be done on uno4kse? What image do you use on the duo4k??I am not sure what the problem is here....
But here are PiP modes that are supported in my Vu+Duo4KSE
Note the current mode shown in the screenshot. For me seems to work normal.....
The shots are from OpenViX....
There i dont experience any crashes or issues with PiP.
the view on image 132828 can be adjusted so live picture to be stretched too. I think that is a bug in python. But PiP works fine.
edit: I tried this on my uno4kse with same image and it work the same way.
Edited by DimitarCC, 21 February 2024 - 16:01.
Vu+DUO4KSE, DM920UHD, Vu+Uno4KSE, SF8008Mini, 2xPulse4K, Vu+Solo2, Dreambox DM500HD, Triax 78 (7E,9E,13E,19.2E,23.5E) & 2xTriax 78 (39E)
Posted 21 February 2024 - 16:04
Sounds the restriction may be removed... but before we need good testing on all the boxes...But is your output 4K in these cases?
Edited by littlesat, 21 February 2024 - 16:05.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 21 February 2024 - 16:20
Sounds the restriction may be removed... but before we need good testing on all the boxes...But is your output 4K in these cases?
Yes the hdmi output resolution is 2160p (4K) and on the screenshot both live and PiP are FHD services.
It also works if live is 4K and PiP is FHD. But PiP can not be 4K.
Vu+DUO4KSE, DM920UHD, Vu+Uno4KSE, SF8008Mini, 2xPulse4K, Vu+Solo2, Dreambox DM500HD, Triax 78 (7E,9E,13E,19.2E,23.5E) & 2xTriax 78 (39E)
Posted 21 February 2024 - 17:26
Could someone let me know when & IF this gonna happen. One more thing, this (if it gonna be altered) will happen on the "develp builds" in the first place??Sounds the restriction may be removed... but before we need good testing on all the boxes...But is your output 4K in these cases?
Posted 21 February 2024 - 17:49
First it needs a bit more investigation
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 21 February 2024 - 17:54
This is what I see now in SystemInfo.py
BoxInfo.setItem("MaxPIPSize", model in ("hd51", "h7", "vs1500", "e4hd") and (360, 288) or (540, 432))
It seems for VU it is not limited to 1/4 of a screen but on 540x432.... full size is here 720x576!!! And I see exceptions for some boxes but I already know there are more boxes that need limitations.... I'm afraid we need at least change the 540 432 to 720 576... (it is based on SD resolution as kind of overlay). Somehow this was 'never' maintained....
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
0 members, 1 guests, 0 anonymous users
