Where i download this hbbtv plugin for OpenOPLI.
Thanks!
hbbtv plugin for OpenOPLI
Re: hbbtv plugin for OpenOPLI #2
Re: hbbtv plugin for OpenOPLI #3
Re: hbbtv plugin for OpenOPLI #4
Re: hbbtv plugin for OpenOPLI #5
Posted 26 March 2024 - 21:01
I dont think that will still work in python 3, so it might have been removed from the feed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: hbbtv plugin for OpenOPLI #6
Posted 26 March 2024 - 21:56
Well nowdays images are too large for solo2 imho....There is no space left for anything than the standard. The flash of solo2 is too small.
So i think there is no point to install latest image....maybe older py2 image....
Vu+DUO4KSE, DM920UHD, Vu+Uno4KSE, SF8008Mini, 2xPulse4K, Vu+Solo2, Dreambox DM500HD, Triax 78 (7E,9E,13E,19.2E,23.5E) & 2xTriax 78 (39E)
Re: hbbtv plugin for OpenOPLI #7
Re: hbbtv plugin for OpenOPLI #8
Posted 27 March 2024 - 15:07
256Mb is still very much doable, 128MB is slowly becoming a big problem, especially for kirkstone images with at the moment won't fit.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: hbbtv plugin for OpenOPLI #9
Posted 16 July 2024 - 11:49
Het lijkt alsof ik ooit deze plugin heb geïnstalleerd. Ik weet dat niet meer.
Maar toen ik vandaag schakelde naar ORF crashte mijn VuUltimo4K. Zie bijgaand crashlog. (vandaar dat mijn aandacht naar deze plugin ging)
Ik kon de plugin nog wel gebruiken, maar er mist een -deel van- de plugin. Dat stond centraal in het scherm.
De plugin verwijderd. Hierna was het netwerk (IP adres en nameserver) onjuist. Daar kwam ik achter toen in de crashlog wilde attachen en dat niet kon.
Herstarten veranderde dat niet. VuUltimo4k uitgeschakeld. Na opstarten was netwerk weer in orde.
Dit bericht is geen hulpvraag, ik gebruikte HBBTV niet (of niet bewust). Dit is informatie.
Attached Files
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Re: hbbtv plugin for OpenOPLI #10
Posted 16 July 2024 - 12:34
English here please.
I see two different errors:
Traceback (most recent call last): File "/usr/lib/enigma2/python/Navigation.py", line 86, in dispatchEvent File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 82, in event File "/usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/plugin.py", line 253, in _cb_ait_detected File "/usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/plugin.py", line 304, in get_autostart_application ModuleNotFoundError: No module named 'Plugins.Extensions.WebkitHbbTV.aitreader' [ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0xb36cb688>>,(21,)) failed)
As the module is present, my first guess would be: not compatible with python3.
../../git/lib/base/ebase.cpp:155 ASSERTION notifiers.find(fd) == notifiers.end() FAILED!
This one I haven't seen for a long while, but no idea what causes this.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: hbbtv plugin for OpenOPLI #11
Posted 16 July 2024 - 12:37
HBBTV does not work anymore on ORF because => https://der.orf.at/u...rfsmart100.html
they changed to dash and as such new pulgins are required
in phy 2 it works
Attached Files
Edited by tonskidutch, 16 July 2024 - 12:44.
Re: hbbtv plugin for OpenOPLI #12
Posted 19 July 2024 - 17:56
If someone is willing to test, the files in this zip go into /usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/, and you to restart Enigma after you've done so.
Attached Files
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: hbbtv plugin for OpenOPLI #13
Re: hbbtv plugin for OpenOPLI #14
Posted 16 August 2024 - 09:13
Try this plugin.py file.
Exceptions fixed
diff --git a/plugin.py b/plugin.py index cc660f0..e4699ce 100644 --- a/plugin.py +++ b/plugin.py @@ -177,7 +177,7 @@ class VBHandler(VBHandlers): if (vbcfg.g_channel_info): try: data = struct.pack('iiiii', int(orgid), vbcfg.g_channel_info[0], vbcfg.g_channel_info[1], vbcfg.g_channel_info[2], len(vbcfg.g_channel_info[3])) + vbcfg.g_channel_info[3] - except Exception, err: + except Exception as err: vbcfg.ERR(err) return (False, None) else: @@ -208,7 +208,7 @@ class VBHandler(VBHandlers): try: data = struct.pack('i', int(offset)) - except Exception, err: + except Exception as err: vbcfg.ERR(err) return (False, None) @@ -322,7 +322,7 @@ class VBMain(Screen): try: if selected[1] is not None: self._cb_hbbtv_activated(selected[1]["url"], selected[1]) - except Exception, ErrMsg: + except Exception as ErrMsg: vbcfg.ERR(ErrMsg) def get_autostart_application(self):
Attached Files
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Re: hbbtv plugin for OpenOPLI #15
Re: hbbtv plugin for OpenOPLI #16
Posted 16 August 2024 - 10:15
New zip file with all files.
module import fixed.
No error with plugin browser now.
Patch included.
Attached Files
Edited by Beeker, 16 August 2024 - 10:15.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Re: hbbtv plugin for OpenOPLI #17
Posted 16 August 2024 - 13:58
Tried the latest zip and get a greenscreen
Traceback (most recent call last): File "/usr/lib/enigma2/python/Navigation.py", line 86, in dispatchEvent File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 82, in event File "/usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/plugin.py", line 295, in _cb_ait_detected self._app_info = self.get_autostart_application() File "/usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/plugin.py", line 346, in get_autostart_application from aitreader import eAITSectionReader ModuleNotFoundError: No module named 'aitreader' [ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0xb3778850>>,(21,)) failed)
maybe i'm doing it wrong?
first installed enigma2-plugin-extensions-webkithbbtv, which also installed vuplus-webkithbbtv-dumpait and webkit-hbbtv-browser-vuuno4kse as dependency.
then i copied the content of the latest zip to /usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV, overwriting files which already existed.
Re: hbbtv plugin for OpenOPLI #18
Re: hbbtv plugin for OpenOPLI #19
Posted 16 August 2024 - 15:19
with latest plugin.py:
Traceback (most recent call last): File "/usr/lib/enigma2/python/Navigation.py", line 86, in dispatchEvent File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 82, in event File "/usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/plugin.py", line 295, in _cb_ait_detected File "/usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/plugin.py", line 346, in get_autostart_application File "/usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/aitreader.py", line 9, in <module> NameError: name 'unichr' is not defined [ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0xb2a5dfd0>>,(21,)) failed)
Re: hbbtv plugin for OpenOPLI #20
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users