Posted 12 July 2024 - 16:01
WanWizard .. i install the oscam emu from the feed
i deleted it and instal this old version of oscam emu and it works without any problem
enigma2-softcams-oscam-all-images_11.678-emu-r798-arm+mips_all.ipk.zip 3.81MB
15 downloads
Edited by dany, 12 July 2024 - 16:02.
Posted 12 July 2024 - 16:16
I can't reproduce it.
I have OSCam 2.24.07-11804-802 running, currently watching SKY DE Cinema, no problems whatsoever. Not with oscam, not with oscam-emu.
bash-5.1# opkg list-installed | grep oscam enigma2-plugin-extensions-oscamstatus - 2.0+git55+0004ed5-r1.3 enigma2-plugin-softcams-oscam - git10715+608d3ff-r0.0 enigma2-plugin-softcams-oscam-emu - git10768+b1ecb72-r0.0
so back to the original problem, which is more important, as it happens on release images.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 July 2024 - 16:17
What kind of readers and card(s) do you use?
Internal or external readers?
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message 
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 12 July 2024 - 17:32
Thanks a million for the update.
If you have time, please try to fix the warning Missing dvbcsa ecm headers during build in the log
I have flashed 9.0-release and tested it, but I can not reproduce this.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 13 July 2024 - 15:40
The problem still persists even after today's updates
The problem only exists in openpli-develop image .. i don't have any problem with openpli 9.0
These are pictures of the oscam emu that i use in both images ( openpli-develop and openpli 9.0)
thank you
openpli-develop-oscam emu version.png 1.02MB
1 downloads
openpli 9.0 oscam emu version.png 856.4KB
1 downloads
Posted 13 July 2024 - 16:06
The difference is 4 commits in oscam itself. 11801, 11802 and 11803 are about the oscam web interface, 11804 is a bug fix which is reverted in 11805, so maybe that is the issue.
OpenPLi develop always runs on the latest versions, which can be work in progress, untested, or unstable. If you can't live with that, or can't wait for the issue to be fixed upstream, don't run develop.
oscam-emu source was been updated with the latest oscam version an hour ago, so expect 11805 to be in develop on the next build.
Edited by WanWizard, 13 July 2024 - 16:18.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 13 July 2024 - 16:30
I am currently on openpli 9.0 image and there is no problem
I will wait for the next updates of develop image and see if there is a change
If the problem is not solved, i will have to delete the oscam emu and use the old oscam emu that i uploaded, as it works fine.
always .. thank you for the quick reply
Edited by dany, 13 July 2024 - 16:31.
Posted 13 July 2024 - 17:33
Thanks a million for the update.
If you have time, please try to fix the warning Missing dvbcsa ecm headers during build in the log
I have flashed 9.0-release and tested it, but I can not reproduce this.
I am sorry, I forgot to mention in post #14 that I had enabled streamrelay by going to the oscam web interface, Config, Stream Relay, Mode (requires OSCam restart) 1 - enabled and restarted oscam-emu. Also, I made an error in post #14, the ipk was enigma2-plugin-softcams-oscam-emu_git10759+41eca42-r0.0_armv7ahf-neon.ipk
I tried openpli-develop-vuduo4k-20240712_usb.zip and enigma2-plugin-softcams-oscam-emu_git10768+b1ecb72-r0.0_armv7ahf-neon.ipk 11804-802 and there was no problem in the log about streamrelay
2024/07/13 08:11:50 00000000 s (main) Host name = vuduo4k 2024/07/13 08:11:50 00000000 s (main) Release = 4.1.45-1.17 2024/07/13 08:11:50 00000000 s (main) Version = #1 SMP Sat Jun 15 14:33:09 UTC 2024 2024/07/13 08:11:50 00000000 s (main) Machine = armv7l 2024/07/13 08:11:50 00000000 s (main) Stb model = dm8000 2024/07/13 08:11:50 00000000 s (main) Stb vumodel = vuduo4k 2024/07/13 08:11:50 00000000 s (main) Stb boxtype = vuduo4k 2024/07/13 08:11:50 00000000 s (main) creating pidfile /tmp/oscam-emu.pid with pid 2254 2024/07/13 08:11:50 00000000 s (relay) Stream Relay server initialized 2024/07/13 08:11:50 00000000 (relay) INFO: (ecm) dynamic dvbcsa parallel mode = 128 (relay buffer time: 0 ms)
I then tried openpli-9.0-release-vuduo4k-20240708_usb.zip and enigma2-plugin-softcams-oscam-emu_git10759+41eca42-r0.0_armv7ahf-neon.ipk 11800-802 and there was the same error as in post #11 WARNING: (wrong) dynamic dvbcsa parallel mode = 32 (relay buffer time: 0 ms)! ECM processing via Streamrelay does not work! Missing dvbcsa ecm headers during build!
On the same openpli-9.0-release-vuduo4k-20240708_usb.zip I tried oscam-emu 11804-802 from develop enigma2-plugin-softcams-oscam-emu_git10768+b1ecb72-r0.0_armv7ahf-neon.ipk and the error message was shorter, it ends with ECM processing via Streamrelay does not work!
2024/07/13 08:36:38 00000000 s (main) Host name = vuduo4k 2024/07/13 08:36:38 00000000 s (main) Release = 4.1.45-1.17 2024/07/13 08:36:38 00000000 s (main) Version = #1 SMP Mon Jul 31 22:32:36 UTC 2023 2024/07/13 08:36:38 00000000 s (main) Machine = armv7l 2024/07/13 08:36:38 00000000 s (main) Stb model = dm8000 2024/07/13 08:36:38 00000000 s (main) Stb vumodel = vuduo4k 2024/07/13 08:36:38 00000000 s (main) Stb boxtype = vuduo4k 2024/07/13 08:36:38 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 17608 2024/07/13 08:36:38 00000000 s (relay) Stream Relay server initialized 2024/07/13 08:36:38 00000000 (relay) WARNING: (wrong) dynamic dvbcsa parallel mode = 32 (relay buffer time: 0 ms)! ECM processing via Streamrelay does not work!
The warning message comes from oscam-emu source module-streamrelay.c so it will probably need a c developer to check it.
Thank you for the effort you spent, I will use develop version and not trouble you any more.
Posted 13 July 2024 - 18:02
There will be a full release build tomorrow, so lets see what happens when that is finished. It might be related to building the plugin seperately, outside of the regular build.
As the code is the same, this is not an oscam development issue.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 July 2024 - 12:29
Fixed .... after today's updates
oscam emu 11805-802 .. works very well here
WanWizard .. thank you friend
Posted Today, 12:32
oscam-emu (openpli-develop) werkt niet goed na de updates van vandaag, het werkt maar een minuut en stopt dan
That in itself is quite special, because nothing has been updated in that version in recent weeks, except for a small adjustment, but it seems to me that this will cause everything to stop working.
So you will have to provide a little bit more information than just the comment that the emu stops working after 1 minute
hi Tech,
sorry for my ignorance, but is this oscam repo that you linked the same as this one? if not, are there any plans to update the feed to use the gitlab repo, since github repo is 404? thank you.
0 members, 11 guests, 0 anonymous users
