aug

Nothing's wrong, I'm tired, I'll throw it away, the firmware has probably failed Thanks for the replies

you will probably need an RS232 serial interface, more informations here

Any chance of recovery HD51? - [EN] Enduser support - Forums (openpli.org)

the decoder, turning it on with the rear button, stops on boot and does not unlock from there. I had inserted the openatv image as multiboot in the first slot. I inserted the egami image into slot 2 I inserted the openpli 8.3 image into slot 3, and everything worked. Yesterday I turned on the decoder from the openatv image and switched to the openpli image via multiboot selector. The word boot came out on the display and it didn't go any further, it stuck on boot, I can't even connect to the LAN. I tried inserting some images with different USBs but it doesn't read anything. Normally with an image on the USB inserted into the rear decoder, by holding down the small button inside the front door it reads (BOOT - USB - FLASH) my decoder does nothing.

In the decoder I had the multiboot of the openatv, in the second slot I had the egami, in the third slot I had the openpli, in the transition from the openatv to the openpli the decoder got stuck on the boot. There is no way to unlock it. There are some procedures to be carried out, even the LAN connection doesn't work