wu-li

octagon1008.tar.gz
Image - 05.11.2018

DISPLAY:

MAXI BOOT
FLASH    
USB I
BOOTING
SH4

does not load

hypertrm:

*

Board: STb7200-HDBOX  [29-bit mode]

U-Boot 1.3.1 (Apr 28 2010 - 14:35:18) - stm23-0032
---created by TDT for general purpose---

DRAM:  128 MB
Flash:   32 MB
In:    serial
Out:   serial
Err:   serial
init Frontpanel... done, AV700
Hit any key to stop autoboot:  0
bootmenu_timeout:2000,default:0
add entry:0 - FLASH
add entry:1 - USB I
add entry:2 - USB II
add entry:3 - USB III
add entry:4 - USB IV
add entry:5 - empty
add entry:6 - empty
add entry:7 - empty
add entry:8 - empty
add entry:9 - E FLASH
entering bootmenu - default:0 - FLASH
selected: USB I
selected: USB I
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
loading from usb 0:1

1964824 bytes read
## Booting image at a5000000 ...
   Image Name:   Linux-2.6.32.71_stm24_0217
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1964760 Bytes =  1.9 MB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS1,115200 root=/dev/sda1 rw mem=128m ip=192.168.-.-
5:192.168.-.-:192.168.-.-:255.255.255.0:AT700:eth0:off coprocessor_mem=4m@0x10
000000,4m@0x10400000 rootdelay=5 nwhwconf=device:eth0,hwaddr:00:-:-:-:-:- i
nit=/bin/devinit - 0x00000000 - 0 ...

copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
INIT: version 2.88 booting
modprobe: FATAL: Module fuse not found in directory /lib/modules/2.6.32.71_stm24
_0217
Loading fuse module failed!
sh: sda1: unknown operand
/etc/init.d/rc: /etc/rcS.d/S05modutils.sh: line 1: can't create /dev/dbox/oled0:
nonexistent directory
/etc/init.d/rc: /etc/rcS.d/S05modutils.sh: line 55: can't create /proc/sys/kerne
l/printk: nonexistent directory
Setting up swapspace version 1, size = 16773120 bytes
UUID=c5cfb3ff-a827-44b7-898a-05dcbc4acbfb
grep: /etc/enigma2/settings: No such file or directory
/dev/dvb/adapter0/video0: No such file or directory
dmesg: klogctl: Function not implemented
ALSA: Restoring mixer settings...
No state is present for card STx7109
Found hardware: "STx7109" "" "" "" ""
Hardware is initialized using a generic method
No state is present for card STx7109
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.dirty_ratio = 60
INIT: Entering runlevel: 3
Configuring network interfaces... ip: RTNETLINK answers: File exists
udhcpc: option -h NAME is deprecated, use -x hostname:NAME
udhcpc (v1.24.1) started
Sending discover...
Sending select for 192.168.-.-...
Lease of 192.168.-.- obtained, lease time 268435455
/etc/udhcpc.d/50default: Adding DNS -.-.-.-
/etc/udhcpc.d/50default: Adding DNS -.-.-.-
ip: SIOCGIFFLAGS: No such device
Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Starting rpcbind daemon...rpcbind: fork failed: No such device
done.
Mounting remote filesystems...
starting statd: done
Starting internet superserver: inetd.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
/dev/dvb/adapter0/video0: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 26, in <module>
    from Screens import InfoBar
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 17, in <module>
  File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>

  File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 33, in <modul
e>
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 117, in <module>
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 107, in __init__
IOError: [Errno 2] No such file or directory: '/etc/lircd.conf'
killall: enigma2: no process killed
/dev/dvb/adapter0/video0: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:

...

IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 26, in <module>
    from Screens import InfoBar
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 17, in <module>
  File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>

  File "/usr/lib/enigma2/python/Screens/ChannelSelection.py", line 33, in <modul
e>
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 117, in <module>
  File "/usr/lib/enigma2/python/Screens/Hotkey.py", line 107, in __init__
IOError: [Errno 2] No such file or directory: '/etc/lircd.conf'
killall: enigma2: no process killed
/dev/dvb/adapter0/video0: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:

...

octagon1008.tar.gz
Image - 11.10.18

DISPLAY:

MAXI BOOT
FLASH        remote control selection: ^ ok
USB1 P1
BOOTING
SH4

does not load

Is it possible to create and add a MAKEDEV script file to the folder ./sbin ?

Thanks

 

 

octagon1008.tar.gz - Image 18.09 and 26.09.2018

Maxiboot Installer 1.5 - USB Install - OK       

display:

MAXI BOOT

FLASH

USB1 P1

BOOTING

T, Duckt
  stop

Power supply off/on - T, Duckt - STOP

 

Image .tar.gz
The same method for HYPERION, HDMU - OK

STi chipset 7101
Flash-ROM : 32 MB
SDRAM : 192 MB
EEPROM : 128 bytes

 

I am referring to the version marked

*OCTAGON SF1008 HD
OCTAGON SF1008 SE HD
OCTAGON SF1008 SE+ HD
OCTAGON SF1008C SE+ HD Kabel
OCTAGON SF1008P SE+ HD
OCTAGON SF1008G SE+ HD
OCTAGON SF1008G+ SE+ HD

 

Folder

deploy/images/octagon1008

openpli-enigma2-pli-extras-octagon1008.rootfs.spark71xxusbimg ?

sorry

 

 

octagon1008.tar.gz - Image 18.09 and 26.09.2018

Maxiboot Installer 1.5 - USB Install - OK       

display:

MAXI BOOT

FLASH

USB1 P1

BOOTING

T, Duckt
  stop

Power supply off/on - T, Duckt - STOP

 

Image .tar.gz
The same method for HYPERION, HDMU - OK

STi chipset 7001
Flash-ROM : 32 MB
SDRAM : 192 MB
EEPROM : 128 bytes

 

I am referring to the version marked

*OCTAGON SF1008 HD
OCTAGON SF1008 SE HD
OCTAGON SF1008 SE+ HD
OCTAGON SF1008C SE+ HD Kabel
OCTAGON SF1008P SE+ HD
OCTAGON SF1008G SE+ HD
OCTAGON SF1008G+ SE+ HD

octagon1008.tar.gz - Image 18.09 and 26.09.2018

Maxiboot Installer 1.5 - USB Install - OK       

display:

MAXI BOOT

FLASH

USB1 P1

BOOTING

T, Duckt
  stop

Power supply off/on - T, Duckt - STOP

Image .tar.gz
The same method for HYPERION, HDMU - OK

STi chipset 7001
Flash-ROM : 32 MB
SDRAM : 192 MB
EEPROM : 128 bytes