moncho

NO SIGNS AND YOU ARE STUNNED

The Define Operating System or the Define image that is available and may be on a new SF8008 Supreme loaded into one of the 4 image slots operates on ONE satellite tuner.

OpenPLi and the other group images should operate om both satellite tuners. The Define OS only supports a single tuner.

moncho

Install a new image without restoring settings.

 

When I get home I will try it before returning the receiver.

 

 

Okay.

Try the attached settings file. C band should work on Tuner 2 or Tuner B. I do not understand your Ku band setup. It may have 4 lnbs on a diseqc switch?

Transfer the settings file to your receiver using Telnet (putty). Use the Telnet command init 4 to stop the receiver.  Place the attached settings file in the receiver, then use Telnet command init 3 to start the receiver.

Thanks, but tuner B has no problems, tuner A does not work with any band.

 

config.Nims.0.advanced.lnb.1.lofh=4800
config.Nims.0.advanced.lnb.1.lofl=3926
...
...
config.Nims.1.advanced.lnb.1.lofh=5150
config.Nims.1.advanced.lnb.1.lofl=5150

You fixed tuner B.

 

You didn't fix tuner A.

 

Your settings file confirms this.

 

If the box was fault Ku channels would not work.

 

Hi, only tuner B works with both bands, tuner A does not work with any settings on both bands.

OK.
Then Return it! You don't want a two tuner receiver that only works on one tuner.

It is already made and ready for return, I only recommend that you do not buy it, I already met another person in another forum who has the same problem, I already told him to return it too. I think this batch is going wrong, it has the same problem, tuner A does not work.